Modal energetic analysis and dynamic response of worm gear drives with a new developed dynamic model

In order to investigate the behaviour of worm drives, a new dynamic model, composed of two blocks, is established and used to extract numerical results. The tooth deflection of the worm drive, bearings, and wheels inertias are taken into consideration. Newmark solving method is applied to solve motion equations. The state of contact of teeth is what enables these signals to manifest themselves. Modal analysis is developed to investigate the different natural modes of the model. Furthermore, modal energetic analysis is used to understand the distribution of strain and kinetic energies. It is also applied to classify natural models into “teeth modes” and “bearing modes”. These two modes constitute two different frequency bands. The dynamic coefficient is measured simultaneously with the gradual increase of the turning speed of the motor. This allows for the evaluation of the overload of the system.

[1]  Tsuyoshi Murata,et al.  {m , 1934, ACML.

[2]  M. Y. Chung,et al.  Parametric study of dynamics of worm and worm-gear set under suddenly applied rotating angle , 2007 .

[3]  Yacine Benabid,et al.  Dynamics study and diagnostics with vibration analysis from worm gear manufactured by reverse engineering techniques , 2016 .

[4]  A. Fernandez del Rincon,et al.  A model for the study of meshing stiffness in spur gear transmissions , 2013 .

[5]  Mohamed Haddar,et al.  Dynamic behaviour of a wind turbine gear system with uncertainties , 2016 .

[6]  Chung-Biau Tsay,et al.  Mathematical model and tooth surfaces of recess action worm gears with double-depth teeth , 2011 .

[7]  Henry Peredur Evans,et al.  Effect of elastohydrodynamic film thickness on a wear model for worm gears , 2006 .

[8]  A. Falah,et al.  LOAD AND STRESS ANALYSIS OF CYLINDRICAL WORM GEARING USING TOOTH SLICING METHOD , 2006 .

[9]  Xuejun Li,et al.  Effect of friction coefficients on the dynamic response of gear systems , 2017 .

[10]  Didier Remond,et al.  Numerical and experimental study of the Loaded Transmission Error of a worm gear with a plastic wheel , 2007 .

[11]  Fakher Chaari,et al.  Dynamic behaviour of back to back planetary gear in run up and run down transient regimes , 2015 .

[13]  Vilmos Simon.  Displacements in worm gears with ground concave worm profile , 1996 .

[14]  K. M. Marshek,et al.  Wear damage to plastic worms and gears , 1977 .

[15]  Fakher Chaari,et al.  Study of a spur gear dynamic behavior in transient regime , 2011 .

[16]  Henry Peredur Evans,et al.  Prediction of the wear pattern in worm gears , 2006 .

[17]  Fakher Chaari,et al.  Effect of elastic coupling on the modal characteristics of spur gearbox system , 2017, Applied Acoustics.

[18]  Fakher Chaari,et al.  Effect of spalling or tooth breakage on gearmesh stiffness and dynamic response of a one-stage spur gear transmission , 2008 .

[19]  Mohamed Haddar,et al.  Effects of modal truncation and condensation methods on the Frequency Response Function of a stage reducer connected by rigid coupling to a planetary gear system , 2017 .

[20]  Sandeep M. Vijayakar,et al.  A study of the relationship between the dynamic factors and the dynamic transmission error of spur gear pairs , 2007 .

[21]  Bernd Sauer,et al.  Calculation of the efficiency of worm gear drives , 2014 .

[22]  Robert G. Parker,et al.  PLANETARY GEAR PARAMETRIC INSTABILITY CAUSED BY MESH STIFFNESS VARIATION , 2002 .

[23]  Haddar Mohamed,et al.  Effects of gear mesh fluctuation and defaults on the dynamic behavior of two-stage straight bevel system , 2014 .

[24]  Mohamed Haddar,et al.  Effects of eccentricity defect on the nonlinear dynamic behavior of the mechanism clutch-helical two stage gear , 2011 .

[25]  Jean-Pierre de Vaujany,et al.  Load Sharing of a Worm Gear With a Plastic Wheel , 2005 .

[26]  Fakher Chaari,et al.  Frequency analysis of a two-stage planetary gearbox using two different methodologies , 2017 .

[27]  Fakher Chaari,et al.  MODAL ANALYSIS OF BACK-TO-BACK PLANETARY GEAR: EXPERIMENTS AND CORRELATION AGAINST LUMPED-PARAMETER MODEL , 2015 .

[28]  Jean-Pierre de Vaujany,et al.  Load Sharing of Worm Gear With a Plastic Wheel , 2007 .