Optimization of high surface area activated carbon production from Enteromorpha prolifra with low-dose activating agent

Abstract High surface area activated carbon was prepared from Enteromorpha prolifra ( E . prolifra ) using few activating agents through a dry-grind strategy. The influences of pyrolysis conditions, including activating agent/char ratio, activation temperature and activation time, on specific surface area, micropore ratio and mean pore size of the obtained carbons were investigated by response surface methodology (RSM). Moreover, the relationships of micro/mesopore ratio with the surface area and mean pore size were also discussed. The optimized parameters were activating agent/char ratio of 1.1 (KOH/char), activation temperature of 850 °C and activation time of 60 min. Activated carbon prepared under optimum conditions possessed high surface area of 3038 m 2  g − 1 and large total pore volume of 2.285 cm 3  g − 1 . The obtained carbon was used as an electrode material. The carbon electrode exhibited a high specific capacitance of 230 F g − 1 at a current density of 0.5 A g − 1 with a good capacitance retention of 86.96% at a high current density of 5.0 A g − 1 in 6 M KOH electrolyte.

[1]  S. Ucar,et al.  Preparation and characterization of activated carbon from waste biomass. , 2009, Journal of hazardous materials.

[2]  Yanzhi Xia,et al.  Removal of lead from aqueous solution by activated carbon prepared from Enteromorpha prolifera by zinc chloride activation. , 2010, Journal of hazardous materials.

[3]  S. Dutta,et al.  Adsorptive removal of chromium (VI) from aqueous solution over powdered activated carbon: Optimisation through response surface methodology , 2011 .

[4]  E. Barrett,et al.  (CONTRIBUTION FROM THE MULTIPLE FELLOWSHIP OF BAUGH AND SONS COMPANY, MELLOX INSTITUTE) The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen Isotherms , 1951 .

[5]  C. Saka.  BET, TG–DTG, FT-IR, SEM, iodine number analysis and preparation of activated carbon from acorn shell by chemical activation with ZnCl2 , 2012 .

[6]  G. Lu,et al.  Preparation of capacitor's electrode from sunflower seed shell. , 2011, Bioresource technology.

[7]  Jie Cheng,et al.  Hierarchical porous carbons prepared from direct coal liquefaction residue and coal for supercapacitor electrodes , 2013 .

[8]  A. A. El-Hendawy.  An insight into the KOH activation mechanism through the production of microporous activated carbon for the removal of Pb2+ cations , 2009 .

[9]  N. Petrov,et al.  Synthesis and characterization of activated carbon from natural asphaltites , 2013 .

[10]  Jinsheng Zhao,et al.  Evaluation of the pyrolytic and kinetic characteristics of Enteromorpha prolifera as a source of renewable bio-fuel from the Yellow Sea of China , 2010 .

[11]  A. Rajaei,et al.  Optimization of ultrasonic-assisted extraction of phenolic compounds from bovine pennyroyal (Phlomidoschema parviflorum) leaves using response surface methodology , 2014 .

[12]  Q. Xie,et al.  Regulation of pore size distribution in coal-based activated carbon , 2009 .

[13]  Kunquan Li,et al.  Optimization of preparation of microporous activated carbon with high surface area from Spartina alterniflora and its p-nitroaniline adsorption characteristics , 2013 .

[14]  K. Y. Foo,et al.  Preparation of activated carbon from sugarcane bagasse by microwave assisted activation for the remediation of semi-aerobic landfill leachate. , 2013, Bioresource technology.

[15]  Jinhua Jiang,et al.  Hierarchical porous carbons with controlled micropores and mesopores for supercapacitor electrode materials , 2008 .

[16]  E. Liu,et al.  An activated microporous carbon prepared from phenol-melamine-formaldehyde resin for lithium ion battery anode , 2012 .

[17]  A. Sivasamy,et al.  Preparation and characterization of corn cob activated carbon coated with nano-sized magnetite particles for the removal of Cr(VI). , 2013, Bioresource technology.

[18]  D. Zhao,et al.  Microwave assisted preparation of efficient activated carbon from grapevine rhytidome for the removal of methyl violet from aqueous solution , 2011 .

[19]  Haoquan Hu,et al.  Mesoporous carbon prepared from direct coal liquefaction residue for methane decomposition , 2012 .

[20]  Qiang Liu,et al.  Preparation and characterization of activated carbon from waste ramulus mori , 2012 .

[21]  R. Menéndez,et al.  Synthesis of activated carbons by chemical activation of new anthracene oil-based pitches and their , 2011 .

[22]  W. Daud,et al.  Preparation of granular activated carbon from oil palm shell by microwave-induced chemical activation: Optimisation using surface response methodology , 2013 .

[23]  R. Tseng,et al.  Characterization and use of high surface area activated carbons prepared from cane pith for liquid-phase adsorption. , 2006, Journal of hazardous materials.

[24]  Mingming Chen,et al.  Hierarchical porous carbon microspheres derived from porous starch for use in high-rate electrochemical double-layer capacitors. , 2013, Bioresource technology.

[25]  Q. Wang,et al.  Three-dimensional flower-like and hierarchical porous carbon materials as high-rate performance electrodes for supercapacitors , 2014 .

[26]  Muthanna J. Ahmed,et al.  Microporous activated carbon from Siris seed pods by microwave-induced KOH activation for metronidazole adsorption , 2013 .

[27]  M. Ibrahim,et al.  Effect of acidic activating agents on surface area and surface functional groups of activated carbons produced from Acacia mangium wood , 2013 .

[28]  M. Ibrahim,et al.  Optimized preparation for large surface area activated carbon from date (Phoenix dactylifera L.) stone biomass , 2014 .

[29]  D. Angın,et al.  Influence of process parameters on the surface and chemical properties of activated carbon obtained from biochar by chemical activation. , 2013, Bioresource technology.

[30]  Lihui Huang,et al.  Preparation of Enteromorpha prolifera-based cetyl trimethyl ammonium bromide-doped activated carbon and its application for nickel(II) removal. , 2014, Ecotoxicology and environmental safety.

[31]  Dingcai Wu,et al.  Hierarchical porous carbons: design, preparation, and performance in energy storage , 2011 .

[32]  P. Webley,et al.  Preparation of activated carbons from corncob with large specific surface area by a variety of chemical activators and their application in gas storage , 2010 .

[33]  Jian Zhang,et al.  Activated carbons with well-developed microporosity and high surface acidity prepared from lotus stalks by organophosphorus compounds activations , 2013 .

[34]  A. Özer,et al.  Biosorption of copper(II) ions on Enteromorpha prolifera: Application of response surface methodology (RSM) , 2009 .

[35]  R. Viswanathan,et al.  Response surface optimisation of process variables for microencapsulation of garlic (Allium sativum L.) oleoresin by spray drying , 2013 .

[36]  Wenchao Yang,et al.  Direct hydrothermal liquefaction of undried macroalgae Enteromorpha prolifera using acid catalysts. , 2014 .

[37]  S. Hashmi,et al.  Preparation of highly porous binderless activated carbon electrodes from fibres of oil palm empty fruit bunches for application in supercapacitors. , 2013, Bioresource technology.

[38]  André L. Cazetta,et al.  NaOH-activated carbon of high surface area produced from coconut shell: Kinetics and equilibrium studies from the methylene blue adsorption , 2011 .

[39]  Qiuming Gao,et al.  Hierarchical porous carbons prepared by an easy one-step carbonization and activation of phenol–formaldehyde resins with high performance for supercapacitors , 2011 .

[40]  Qi-sheng Zhang,et al.  Adsorptive removal of aniline from aqueous solution by oxygen plasma irradiated bamboo based activated carbon , 2012 .

[41]  Filiz Karacan,et al.  Optimization of manufacturing conditions for activated carbon from Turkish lignite by chemical activation using response surface methodology , 2007 .

[42]  C. Fang,et al.  Preparation and characterization of high surface area activated carbons from co-pyrolysis product of coal-tar pitch and rosin , 2013 .

[43]  E. Barrett,et al.  The Determination of Pore Volume and Area Distributions in Porous Substances. II. Comparison between Nitrogen Isotherm and Mercury Porosimeter Methods , 1951 .

[44]  Duan Xinhui,et al.  Preparation of activated carbon from Jatropha hull with microwave heating: Optimization using response surface methodology , 2011 .

[45]  M. Bezerra,et al.  Response surface methodology (RSM) as a tool for optimization in analytical chemistry. , 2008, Talanta.

[46]  A. Rouboa,et al.  Optimizing the gasification operating conditions of forest residues by coupling a two-stage equilibrium model with a response surface methodology , 2014 .

[47]  I. Tan,et al.  Adsorption of basic dye on high-surface-area activated carbon prepared from coconut husk: equilibrium, kinetic and thermodynamic studies. , 2008, Journal of hazardous materials.