Measurement of process-induced strains in composite materials using embedded fiber optic sensors

This paper presents the results of experiments to measure the internal strains and temperatures that are generated in graphite/epoxy composite specimens during processing using embedded fiber optic strain sensors and thermocouples. Measurements of strain and temperature, combined with a computational model, offer the potential for non-destructive, real-time determination of residual stress in composites, and may be useful for process monitoring and control. Extrinsic Fabry-Perot interferometer, Bragg grating strain sensors, and thermocouples were embedded in graphite/epoxy composite laminates prior to cure. The specimens were cured in a press, and the internal strains and temperatures developed during processing were monitored and recorded. The results are compared with expected values, and limitations of the experimental technique are discussed.

[1]  G. Sendeckyj,et al.  Review of the mechanics of embedded optical sensors , 1995 .

[2]  Eric Udd.  Fiber optic smart structures , 1996 .

[3]  Isaac M Daniel,et al.  Effect of laminate construction on residual stresses in graphite/polyimide composites , 1977 .

[4]  A. Jones,et al.  X-Ray Diffraction Investigation of Triaxial Residual Stresses in Composite Materials , 1993 .

[5]  S. Majumdar,et al.  Neutron Diffraction NDE for Advanced Composites , 1990 .

[6]  William W. Morey,et al.  Fiber optic grating technology , 1995, Pacific Northwest Fiber Optic Sensor.

[7]  C. Galiotis,et al.  Residual strain mapping in carbon fibre/PEEK composites , 1988 .

[8]  John A. Nairn,et al.  Matrix solidification and the resulting residual thermal stresses in composites , 1985 .

[9]  David R. Clarke,et al.  Measurement of residual stresses in sapphire fiber composites using optical fluorescence , 1993 .

[10]  C. Chamis,et al.  Measurement of residual strains in boron-epoxy and glass-epoxy laminates , 1975 .

[11]  G. Hocker,et al.  Fiber optics strain gauge. , 1978, Applied optics.

[12]  Scott R. White,et al.  Process Modeling of Composite Materials: Residual Stress Development during Cure. Part II. Experimental Validation , 1992 .

[13]  Scott R. White,et al.  Process Modeling of Composite Materials: Residual Stress Development during Cure. Part I. Model Formulation , 1992 .

[14]  Eric Udd,et al.  Three-axis strain and temperature fiber optic grating sensor , 1996, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[15]  Richard O. Claus,et al.  Validation of axial strain transfer from a composite laminate to embedded optical fiber sensors , 1993, Other Conferences.

[16]  Craig M. Lawrence,et al.  Validation of the absolute extrinsic Fabry-Perot interferometer for strain measurements , 1995, Pacific Northwest Fiber Optic Sensor.