Mechanics of the Flow in the Small and Middle Human Airways

Steady divergent flow (inspiration directed) is measured using Laser Doppler Velocimetry in a large-scale model carefully mimicing the morphometry of small human airways. The anatomical features, which induced vorticity in the flow from vorticity free entrance flow, are evaluated under conditions of convective similitude. The flow pattern in the daughter tubes is typical of laminar flow within the entrance to sharp bends (Dean number >500) with rapid development of strong secondary flows (maximum secondary velocity is 45 percent of mean axial velocity). The secondary flow consists of two main vortices, with two smaller and weaker secondary vortex activities toward the inner wall of curvature. There appears to be time dependent interaction with these vortices causing warbling at specific flow conditions. The calculated vorticity transport along the flow axis showed interaction between the viscous force at the new boundary layer development along the carinal wall and centrifugal force of curvature, with a significant influence by the upstream flow prior to entering the actual flow division. This interplay results in an overshoot of the calculated vorticity transport comparable to flow entering curved bends and suppression for the tendency to separate at the inner wall of these tight bends. The maximum primary flow velocities are skewed toward the carinal side (outer wall of curvature) and development of a second peak occurred with convection of the high velocity elements toward the inner wall of curvature by the strong secondary flow.

[1]  I. Sobey Inviscid secondary motions in a tube of slowly varying ellipticity , 1976, Journal of Fluid Mechanics.

[2]  R C Schroter,et al.  Flow patterns in models of the human bronchial airways. , 1969, Respiration physiology.

[3]  D E Olson,et al.  Physical models of the smaller pulmonary airways. , 1992, Journal of applied physiology.

[4]  Y. Zhao,et al.  Steady inspiratory flow in a model symmetric bifurcation. , 1994, Journal of biomechanical engineering.

[5]  H. Chang,et al.  A model study of flow dynamics in human central airways. Part I: axial velocity profiles. , 1982, Respiration physiology.

[6]  B. Snyder,et al.  The upstream scale of flow development in curved circular pipes , 1985, Journal of Fluid Mechanics.

[7]  D. Olson,et al.  Fluid mechanics relevant to respiration : flow within curved or elliptical tubes and bifurcating systems , 1971 .

[8]  B. Snyder,et al.  Flow development in a model airway bronchus , 1989, Journal of Fluid Mechanics.

[9]  L. Talbot,et al.  Laser anemometer study of flow development in curved circular pipes , 1978, Journal of Fluid Mechanics.

[10]  J. West,et al.  Patterns of gas flow in the upper bronchial tree. , 1959, Journal of applied physiology.

[11]  A. F. Mills,et al.  Friction Factor for Flow in Rectangular Ducts with One Side Rib-Roughened , 1994 .

[12]  D Isabey,et al.  A model study of flow dynamics in human central airways. Part II: secondary flow velocities. , 1982, Respiration physiology.

[13]  D E Olson,et al.  Models of the human bronchial tree. , 1971, Journal of applied physiology.

[14]  J. West Measurement of bronchial air flow. , 1960, Journal of applied physiology.