Assessment of the Density Loss in Anobiid Infested Pine Using X-ray Micro-Computed Tomography

The present study aims at evaluating the impact of anobiid damage on pine timber elements. Anobiid attack produces a diffuse damage of the elements with a set of tunnels in random directions and sizes, thus confusing quantification. Therefore, a method was developed based on X-ray micro-computed tomography (μ-XCT) to obtain, for naturally infested timber samples, an empirical correlation between lost material percentage (consumed by beetles) and timber apparent density (original, before degradation—OTD and residual, after degradation—RTD). The quantified density loss can then be used in further assessment of the structure. The results of the tests performed showed high correlation between original apparent density and lost material percentage (r2 = 0.60) and between residual apparent density and lost material percentage (r2 = 0.83), which confirms μ-XCT as a valuable tool to the required quantification. The loss of density results can be further applied on the definition of an assessment method for the evaluation of the residual strength of anobiids infested timber, thus contributing to reducing unnecessary replacement. The optimized procedure of the μ-XCT study for infested Maritime pine (Pinus pinaster) is presented and discussed in this article.

[1]  WeiQiang,et al.  On the use of X-ray computed tomography for determining wood properties: a review11This article is a contribution to the series The Role of Sensors in the New Forest Products Industry and Bioeconomy. , 2011 .

[2]  Stephen Gilbert,et al.  Development of a technique to measure the residual strength of woodworm infested timber , 2001 .

[3]  J. Parracha,et al.  A semi-destructive assessment method to estimate the residual strength of maritime pine structural elements degraded by anobiids , 2019, Materials and Structures.

[4]  Emine N. Caner-Saltik,et al.  In situ assessment of structural timber elements of a historic building by infrared thermography and ultrasonic velocity , 2007 .

[5]  Antonia Moropoulou,et al.  Infrared thermographic inspection of murals and characterization of degradation in historic monuments , 2013 .

[6]  Anton du Plessis,et al.  A review of X-ray computed tomography of concrete and asphalt construction materials , 2019, Construction and Building Materials.

[7]  Chris Broeckhoven,et al.  Laboratory x-ray micro-computed tomography: a user guideline for biological samples , 2017, GigaScience.

[8]  Carlos Figueiredo,et al.  Non-destructive microtomography-based imaging and measuring laboratory-induced degradation of travertine, a random heterogeneous geomaterial used in urban heritage , 2013, Environmental Earth Sciences.

[9]  S. Himmi,et al.  X-ray tomographic analysis of the initial structure of the royal chamber and the nest-founding behavior of the drywood termite Incisitermes minor , 2014, Journal of Wood Science.

[10]  I. H. Parkinson,et al.  Variation in segmentation of bone from micro-CT imaging: implications for quantitative morphometric analysis , 2008, Australasian Physics & Engineering Sciences in Medicine.

[11]  Richard A. Ketcham,et al.  Nondestructive high-resolution visualization and measurement of anisotropic effective porosity in complex lithologies using high-resolution X-ray computed tomography , 2005 .

[12]  Paulo B. Lourenço,et al.  Guidelines for On-Site Assessment of Historic Timber Structures , 2015 .

[13]  Andreas Schreyer,et al.  A new technique for termite monitoring using computer tomography and endoscopy , 2004 .

[14]  José S. Machado,et al.  Effects of Beetle Attack on the Bending and Compression Strength Properties of Pine Wood , 2013 .

[15]  R. Ketcham,et al.  Acquisition, optimization and interpretation of X-ray computed tomographic imagery: applications to the geosciences , 2001 .

[16]  James C. Grande,et al.  Micro/Nano-CT for Visualization of Internal Structures , 2013, Microscopy Today.

[17]  A. Roques,et al.  Micro X‐ray computed tomography suggests cooperative feeding among adult invasive bugs Leptoglossus occidentalis on mature seeds of stone pine Pinus pinea , 2018 .

[18]  Manuel Cabaleiro,et al.  Tridimensional parametric model for prediction of structural safety of existing timber roofs using laser scanner and drilling resistance tests , 2019 .

[19]  Robert Kliger,et al.  Assessment of Density in Timber Using X-Ray Equipment , 2013 .

[20]  Emily Baird,et al.  X-ray micro computed-tomography , 2017, Current Biology.

[21]  Graeme M Campbell,et al.  Quantitative analysis of bone and soft tissue by micro-computed tomography: applications to ex vivo and in vivo studies. , 2014, BoneKEy reports.

[22]  José S. Machado,et al.  In-situ assessment of timber structural members: Combining information from visual strength grading and NDT/SDT methods – A review , 2015 .

[23]  Veerle Cnudde,et al.  X-ray micro-CT used for the localization of water repellents and consolidants inside natural building stones , 2004 .

[24]  Carlos Rivera-Gómez,et al.  IN SITU ASSESSMENT OF STRUCTURAL TIMBER ELEMENTS OF A HISTORIC BUILDING BY MOISTURE CONTENT ANALYSES AND ULTRASONIC VELOCITY TESTS , 2013 .

[25]  It’s what’s inside that counts: computer-aided tomography for evaluating the rate and extent of wood consumption by shipworms , 2018, Journal of Wood Science.

[26]  Maurizio Piazza,et al.  Visual strength-grading and NDT of timber in traditional structures , 2008 .