The combined effect of surface texturing and DLC coating on the functional properties of internal combustion engines

[1]  M. Mansori,et al.  Effect of waviness and roughness on cylinder liner friction , 2018 .

[2]  P. Pawlus,et al.  The effect of both surfaces textured on improvement of tribological properties of sliding elements , 2017 .

[3]  S. M. Hsu,et al.  A critical assessment of surface texturing for friction and wear improvement , 2017 .

[4]  Z. Dimkovski,et al.  Influence of measurement and filtering type on friction predictions between cylinder liner and oil control ring , 2016 .

[5]  Cheol Woo Park,et al.  Optimizing the tribological performance of textured piston ring–liner contact for reduced frictional losses in SI engine: Warm operating conditions , 2016 .

[6]  Xijun Hua,et al.  Research on discriminating partition laser surface micro-texturing technology of engine cylinder , 2016 .

[7]  Ian Graham Pegg,et al.  Lubricant film thickness and friction force measurements in a laser surface textured reciprocating line contact simulating the piston ring – liner pairing , 2016 .

[8]  A. Lubrecht,et al.  Analytical solution for textured piston ring – Cylinder liner contacts (1D analysis) , 2016 .

[9]  C. Gu,et al.  Effects of surface texturing on ring/liner friction under starved lubrication , 2016 .

[10]  Roberto F. Ausas,et al.  Moving textures: Simulation of a ring sliding on a textured liner , 2014 .

[11]  Pawel Pawlus,et al.  Possibilities of oil pockets creation by the burnishing technique , 2013 .

[12]  S. Mezghani,et al.  Mutual influence of crosshatch angle and superficial roughness of honed surfaces on friction in ring-pack tribo-system , 2013 .

[13]  Wei Tang,et al.  The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact , 2013 .

[14]  Pawel Pawlus,et al.  Improving tribological behaviour of piston ring–cylinder liner frictional pair by liner surface texturing , 2013 .

[15]  Richard K. Leach,et al.  Characterisation of Areal Surface Texture , 2013 .

[16]  Yonghong Fu,et al.  Effect of laser textured dimples on the lubrication performance of cylinder liner in diesel engine , 2012 .

[17]  Yuankai Zhou,et al.  Development of the theoretical model for the optimal design of surface texturing on cylinder liner , 2012 .

[18]  Edney Deschauer Rejowski,et al.  Application of DLC Coating in Cylinder Liners for Friction Reduction , 2012 .

[19]  A. Erdemir,et al.  Global energy consumption due to friction in passenger cars , 2012 .

[20]  P. Pawlus,et al.  Experimental investigation of oil pockets effect on abrasive wear resistance , 2011 .

[21]  P. Pawlus,et al.  The effect of surface texturing on seizure resistance of a steel–bronze assembly , 2010 .

[22]  Young-Ze Lee,et al.  Evaluation of ring surfaces with several coatings for friction, wear and scuffing life , 2009 .

[23]  Bengt-Göran Rosén,et al.  New cylinder liner surfaces for low oil consumption , 2008 .

[24]  J. Vižintin,et al.  Combination of DLC coatings and EP additives for improved tribological behaviour of boundary lubricated surfaces , 2006 .

[25]  S. Hogmark,et al.  DLC coating of boundary lubricated components—advantages of coating one of the contact surfaces rather than both or none , 2003 .

[26]  Simon C. Tung,et al.  Tribological characteristics and surface interaction between piston ring coatings and a blend of energy-conserving oils and ethanol fuels , 2003 .

[27]  Mats Larsson,et al.  ME-C:H coatings in motor vehicles , 2001 .

[28]  P. Pawlus,et al.  Effects of surface texturing and kind of lubricant on the coefficient of friction at ambient and elevated temperatures , 2018 .

[29]  P. Pawlus,et al.  Determination of oil demand for textured surfaces under conformal contact conditions , 2016 .

[30]  H. Masjuki,et al.  Effect of DLC Coating on Tribological Behavior of Cylinder Liner-piston Ring Material Combination When Lubricated with Jatropha Oil☆ , 2013 .