Impedance spectroscopy and circuit modeling of Southern pine above 20% moisture content

Abstract Impedance spectra were collected from Southern pine (Pinus spp.) equilibrated to a moisture content 20% and a saturated condition. Cylindrical graphite electrodes were embedded in the wood so that they met nearly end-to-end along a line parallel to the grain, and impedance properties were characterized as functions of electrode spacing and electrode contact pressure at frequencies between 1×10-1 and 3×105 Hz. The data exhibit a low-frequency tail that can be fit with a Warburg element, indicative of a diffusive motion of charge carriers. Values of the Warburg impedance were compared with previously published data on molar conductivities of endogenous mineral ions in wood. The data suggest that mineral ions are the predominant charge carriers in wood at low frequencies and high moisture contents based on the strong correlation between the Warburg impedance and molar conductivities.

[1]  Douglas R. Rammer,et al.  The use of electrochemical impedance spectroscopy (EIS) to measure the corrosion of metals in contact with wood , 2005 .

[2]  W. B. Johnson,et al.  Fundamentals of Impedance Spectroscopy , 2005 .

[3]  F. Mansfeld,et al.  Analysis of EIS Data for Common Corrosion Processes , 1993 .

[4]  A. Brown,et al.  Pinus Sylvestris L. , 1968 .

[5]  W. Chu,et al.  Technical Note: Stress Corrosion Cracking of Mild Steel under Compressive Stress , 1987 .

[6]  F. Prinz,et al.  Ionic and electronic impedance imaging using atomic force microscopy , 2004 .

[7]  P. Simons,et al.  Electrical transport of endogenous mineral ions in green sapwood ofPinus sylvestris L. (Scots pine) , 1998, Wood Science and Technology.

[8]  K. Cole,et al.  Dispersion and Absorption in Dielectrics II. Direct Current Characteristics , 1942 .

[9]  R. T. Lin a Study of Electrical Conduction in Wood. , 1965 .

[10]  A. Baker,et al.  Corrosion of metals in preservative-treated wood , 2012 .

[11]  E. J. Jack,et al.  Electrochemical Study of the Corrosion of Metals in Contact with Preservative-Treated Wood , 1987 .

[12]  Carol Polakowski,et al.  Volume 13A Corrosion: Fundamentals, Testing, and Protection , 2003 .

[13]  K. Cole,et al.  Dispersion and Absorption in Dielectrics I. Alternating Current Characteristics , 1941 .

[14]  Guk-Rwang Won American Society for Testing and Materials , 1987 .

[15]  Denny A. Jones Principles and prevention of corrosion , 1991 .

[16]  C. Skaar Wood-Water Relations , 1988, Springer Series in Wood Science.

[17]  K. Lindberg,et al.  The diffusion, size and location of added silver grains in the cell walls of Swedish pine, Pinus sylvestris , 2000, Wood Science and Technology.

[18]  E. I. Parkhomenko Electrical properties of rocks , 1967 .

[19]  J. K. Dennis,et al.  Corrosion behaviour of zinc and zinc alloy coated steel in preservative treated timber , 1995 .

[20]  John Stewart Brown,et al.  Some Factors Involved in the Mechanism of Electrical Conduction in Wood. , 1962 .

[21]  U. Birkholz,et al.  Mechanism of Electrical Conduction in β-FeSi2 , 1968 .

[22]  J. F. Levy,et al.  Electrical properties of wood Determination of ionic transference numbers and electroosmotic water flow in PinussylvestrisL. (Scots pine) , 1998 .

[23]  D. Rammer,et al.  EQUIVALENT CIRCUIT MODELING OF WOOD AT 12% MOISTURE CONTENT , 2007 .

[24]  W. Kenan,et al.  Impedance Spectroscopy: Emphasizing Solid Materials and Systems , 1987 .