论文信息 - Characteristics of Nucleate Boiling With Gold Nanoparticles in Water

Characteristics of Nucleate Boiling With Gold Nanoparticles in Water

An experiment was designed to test the pool boiling performance of 3 nm gold nanofluid on a flat circular copper coupon. Compared to pure water, an increase of up to 175% in the critical heat flux was seen with gold nanofluids. However, a 25-30% deterioration in the heat transfer coefficient was also observed. The heating surface was observed before and after boiling with a scanning electron microscope. A thin, dark film was observed on the surface, which was due to the deposition of gold particles.Copyright © 2006 by ASME

[1] William W. Yu,et al. ANOMALOUSLY INCREASED EFFECTIVE THERMAL CONDUCTIVITIES OF ETHYLENE GLYCOL-BASED NANOFLUIDS CONTAINING COPPER NANOPARTICLES , 2001 .

[2] I. Golobič,et al. Surface effects on pool boiling CHF , 2002 .

[3] Nandy Putra,et al. Pool boiling of nano-fluids on horizontal narrow tubes , 2003 .

[4] W. Roetzel,et al. TEMPERATURE DEPENDENCE OF THERMAL CONDUCTIVITY ENHANCEMENT FOR NANOFLUIDS , 2003 .

[5] W. Roetzel,et al. Pool boiling characteristics of nano-fluids , 2003 .

[6] J. H. Kim,et al. Effect of nanoparticles on critical heat flux of water in pool boiling heat transfer , 2003 .

[7] Y. Xuan,et al. Investigation on Convective Heat Transfer and Flow Features of Nanofluids , 2003 .

[8] Soon-Heung Chang,et al. Boiling heat transfer performance and phenomena of Al2O 3-water nano-fluids from a plain surface in a pool , 2004 .

[9] P. F. Vassallo,et al. Pool boiling heat transfer experiments in silica–water nano-fluids , 2004 .

[10] Zhou Danna,et al. Heat transfer enhancement of copper nanofluid with acoustic cavitation , 2004 .