Impact of Economic Indicators on the Integrated Design of Wind Turbine Systems

This article presents a framework to integrate and optimize the design of large-scale wind turbines. Annual energy production, load analysis, the structural design of components and the wind farm operation model are coupled to perform a system-level nonlinear optimization. As well as the commonly used design objective levelized cost of energy (LCoE), key metrics of engineering economics such as net present value (NPV), internal rate of return (IRR) and the discounted payback time (DPT) are calculated and used as design objectives, respectively. The results show that IRR and DPT have the same effect as LCoE since they all lead to minimization of the ratio of the capital expenditure to the energy production. Meanwhile, the optimization for NPV tends to maximize the margin between incomes and costs. These two types of economic metrics provide the minimal blade length and maximal blade length of an optimal blade for a target wind turbine at a given wind farm. The turbine properties with respect to the blade length and tower height are also examined. The blade obtained with economic optimization objectives has a much larger relative thickness and smaller chord distributions than that obtained for high aerodynamic performance design. Furthermore, the use of cost control objectives in optimization is crucial in improving the economic efficiency of wind turbines and sacrificing some aerodynamic performance can bring significant reductions in design loads and turbine costs.

[1]  Lin Lu,et al.  Optimization of wind turbine layout position in a wind farm using a newly-developed two-dimensional wake model , 2016 .

[2]  David Wood,et al.  Wind Farm Layout Optimization Considering Commercial Turbine Selection and Hub Height Variation , 2015 .

[3]  W. A. Timmer,et al.  Summary of the Delft University Wind Turbine Dedicated Airfoils , 2003 .

[4]  Joaquim R. R. A. Martins,et al.  Multidisciplinary design optimization of offshore wind turbines for minimum levelized cost of energy , 2014 .

[5]  Andrew Ning,et al.  Integrated Design of Downwind Land-based Wind Turbines using Analytic Gradients , 2016 .

[6]  Guzmán Díaz,et al.  Dynamic evaluation of the levelized cost of wind power generation , 2015 .

[7]  Tim Cockerill,et al.  Site-specific design optimization of wind turbines , 1998 .

[8]  Rick Damiani,et al.  Objectives and Constraints for Wind Turbine Optimization , 2014 .

[9]  Jingjun Zhang,et al.  Multi-island Genetic Algorithm Opetimization of Suspension System , 2012 .

[10]  Katherine Dykes,et al.  Understanding the Benefits and Limitations of Increasing Maximum Rotor Tip Speed for Utility-Scale Wind Turbines , 2014 .

[11]  Jeppe Johansen,et al.  Design of a Wind Turbine Rotor for Maximum Aerodynamic Efficiency , 2009 .

[12]  T. Diveux,et al.  Horizontal axis wind turbine systems: optimization using genetic algorithms , 2001 .

[13]  A. Toffolo,et al.  Optimal design of horizontal-axis wind turbines using blade-element theory and evolutionary computation , 2002 .

[14]  Riccardo Manzini,et al.  A new model for environmental and economic evaluation of renewable energy systems: The case of wind turbines , 2017 .

[15]  S.L. TANG,et al.  TECHNICAL NOTE : THE VARIABLE FINANCIAL INDICATOR IRR AND THE CONSTANT ECONOMIC INDICATOR NPV , 2003 .

[16]  Joaquim R. R. A. Martins,et al.  Multidisciplinary design optimization of large wind turbines—Technical, economic, and design challenges , 2016 .

[17]  Helge Aagaard Madsen,et al.  Optimization method for wind turbine rotors , 1999 .

[18]  Maryam Soleimanzadeh,et al.  A Multi-Objective Optimization Framework for Offshore Wind Farm Layouts and Electric Infrastructures , 2016 .

[19]  Krystel K. Castillo-Villar,et al.  A Review of Methodological Approaches for the Design and Optimization of Wind Farms , 2014 .

[20]  Kevin J. Maki,et al.  System design of a wind turbine using a multi-level optimization approach , 2012 .

[21]  Wen Zhong Shen,et al.  Design of the OffWindChina 5 MW Wind Turbine Rotor , 2017 .

[22]  Tongguang Wang,et al.  Multi-objective differential evolution optimization based on uniform decomposition for wind turbine blade design , 2017 .

[23]  Mohammad Rezaei Mirghaed,et al.  Site specific optimization of wind turbines energy cost: Iterative approach , 2013 .

[24]  Lin Wang,et al.  Integrated structural optimisation of offshore wind turbine support structures based on finite element analysis and genetic algorithm , 2017 .

[25]  Rafic Younes,et al.  Review of performance optimization techniques applied to wind turbines , 2015 .

[26]  Josua P. Meyer,et al.  Review of 600–2500kW sized wind turbines and optimization of hub height for maximum wind energy yield realization , 2011 .