Role of h-BN content on microstructure and mechanical properties of hot-pressed ZrB2–SiC composites

[1]  Seyed Ali Delbari,et al.  Electron microscopy investigation of spark plasma sintered ZrO2 added ZrB2–SiC composite , 2020 .

[2]  Seyed Ali Delbari,et al.  Characterization of spark plasma sintered TiC ceramics reinforced with graphene nano-platelets , 2020 .

[3]  Seyed Ali Delbari,et al.  Densification behavior and microstructure development in TiB2 ceramics doped with h-BN , 2020 .

[4]  Mehdi Shahedi Asl,et al.  Numerical assessment of beryllium oxide as an alternative material for micro heat exchangers , 2020 .

[5]  Seyed Ali Delbari,et al.  Influence of SiAlON addition on the microstructure development of hot-pressed ZrB2–SiC composites , 2020 .

[6]  Seyed Ali Delbari,et al.  Role of nano-WC addition on microstructural, mechanical and thermal characteristics of TiC–SiCw composites , 2020 .

[7]  Mehdi Shahedi Asl,et al.  Characterization of hot-pressed Ti3SiC2–SiC composites , 2020 .

[8]  Zhongya Zhang,et al.  Enhanced mechanical properties of laminated ZrB2–SiC ceramics with porous Si3N4 interface , 2020 .

[9]  Arezoo Emdadi,et al.  Predicting effective fracture toughness of ZrB2-based ultra-high temperature ceramics by phase-field modeling , 2020, Materials & Design.

[10]  J. Zou,et al.  In-situ ZrB2- hBN ceramics with high strength and low elasticity , 2020 .

[11]  Seyed Ali Delbari,et al.  A microstructural approach to the chemical reactions during the spark plasma sintering of novel TiC–BN ceramics , 2020 .

[12]  Mehdi Shahedi Asl,et al.  On the simulation of spark plasma sintered TiB2 ultra high temperature ceramics: A numerical approach , 2020 .

[13]  Seyed Ali Delbari,et al.  Strengthening of novel TiC–AlN ceramic with in-situ synthesized Ti3Al intermetallic compound , 2020 .

[14]  Seyed Ali Delbari,et al.  Role of nano-diamond addition on the characteristics of spark plasma sintered TiC ceramics , 2020, Diamond and Related Materials.

[15]  A. Mukhopadhyay,et al.  Review on ultra-high temperature boride ceramics , 2020, Progress in Materials Science.

[16]  Seyed Ali Delbari,et al.  Strengthening of TiC ceramics sintered by spark plasma via nano-graphite addition , 2020 .

[17]  Mehdi Shahedi Asl,et al.  Aluminum nitride as an alternative ceramic for fabrication of microchannel heat exchangers: A numerical study , 2020, Ceramics International.

[18]  Mehdi Shahedi Asl,et al.  Effects of graphite nano-flakes on thermal and microstructural properties of TiB2–SiC composites , 2020 .

[19]  Seyed Ali Delbari,et al.  Nano-diamond reinforced ZrB2–SiC composites , 2020, Ceramics International.

[20]  Mehdi Shahedi Asl,et al.  Role of graphite nano-flakes on the characteristics of ZrB2-based composites reinforced with SiC whiskers , 2020 .

[21]  Mehdi Shahedi Asl,et al.  Phase transformation in spark plasma sintered ZrB2–V–C composites at different temperatures , 2020 .

[22]  Zhongya Zhang,et al.  SiC whiskers: A strategy to modify the high-temperature performance of laminated ZrB2–SiC ceramics , 2020 .

[23]  Seyed Ali Delbari,et al.  Triplet carbide composites of TiC, WC, and SiC , 2020 .

[24]  Mehdi Shahedi Asl,et al.  Advantages and disadvantages of graphite addition on the characteristics of hot-pressed ZrB2–SiC composites , 2020 .

[25]  Zhihua Yang,et al.  Incorporation of BN-coated carbon fibers into ZrB2/SiBCN ceramic composites and their ablation behavior , 2020 .

[26]  Mehdi Shahedi Asl,et al.  Combined role of SiC particles and SiC whiskers on the characteristics of spark plasma sintered ZrB2 ceramics , 2020 .

[27]  Mohammadreza Shokouhimehr,et al.  A review on the Comsol Multiphysics studies of heat transfer in advanced ceramics , 2020, Journal of Composites and Compounds.

[28]  R. Mitra,et al.  Densification behavior involving creep during spark plasma sintering of ZrB2-SiC based ultra-high temperature ceramic composites , 2020 .

[29]  Mehdi Shahedi Asl,et al.  Numerical simulation of heat transfer during spark plasma sintering of zirconium diboride , 2020, Ceramics International.

[30]  N. P. Vafa,et al.  Characterization of TaC-based fibrous-monolithic ceramics made of fibers with different core/shell volume ratios and orientations , 2020 .

[31]  Mehdi Shahedi Asl,et al.  Hot pressing and oxidation behavior of ZrB2–SiC–TaC composites , 2020 .

[32]  Mehdi Shahedi Asl,et al.  Solid solution formation during spark plasma sintering of ZrB2–TiC–graphite composites , 2020 .

[33]  Mehdi Shahedi Asl,et al.  Heat transfer and pressure drop in a ZrB2 microchannel heat sink: A numerical approach , 2020 .

[34]  Mehdi Shahedi Asl,et al.  Spark plasma sintering of quadruplet ZrB2–SiC–ZrC–Cf composites , 2020 .

[35]  Mehdi Shahedi Asl,et al.  A novel ZrB2–C3N4 composite with improved mechanical properties , 2019 .

[36]  Mehdi Shahedi Asl,et al.  Influence of vanadium content on the characteristics of spark plasma sintered ZrB2–SiC–V composites , 2019, Journal of Alloys and Compounds.

[37]  Mehdi Shahedi Asl,et al.  Nanoindentation and nanostructural characterization of ZrB2–SiC composite doped with graphite nano-flakes , 2019, Composites Part B: Engineering.

[38]  Mehdi Shahedi Asl,et al.  Numerical analyses of heat transfer and thermal stress in a ZrB2 gas turbine stator blade , 2019, Ceramics International.

[39]  Mehdi Shahedi Asl,et al.  Investigation of hot pressed ZrB2–SiC–carbon black nanocomposite by scanning and transmission electron microscopy , 2019, Ceramics International.

[40]  H. Aghajani,et al.  Electrophoretic deposition of bi-layered nano-sized silicon carbide/mullite coating from stabilized suspensions , 2019, Journal of the Australian Ceramic Society.

[41]  Mehdi Shahedi Asl,et al.  Spark plasma sintering of ZrB2-based composites co-reinforced with SiC whiskers and pulverized carbon fibers , 2019, International Journal of Refractory Metals and Hard Materials.

[42]  M. G. Kakroudi,et al.  Investigation of AlN addition on the microstructure and mechanical properties of TiB2 ceramics , 2019, Ceramics International.

[43]  Mehdi Shahedi Asl,et al.  A numerical approach to the heat transfer in monolithic and SiC reinforced HfB2, ZrB2 and TiB2 ceramic cutting tools , 2019, Ceramics International.

[44]  Mehdi Shahedi Asl,et al.  A numerical approach to the heat transfer and thermal stress in a gas turbine stator blade made of HfB2 , 2019 .

[45]  Mehdi Shahedi Asl,et al.  The effect of thermal contact resistance on the temperature distribution in a WC made cutting tool , 2019 .

[46]  E. Bączek,et al.  Wear resistance of ZrB2 based ceramic composites , 2019, International Journal of Refractory Metals and Hard Materials.

[47]  Mehdi Shahedi Asl,et al.  Pressureless sintering of ZrB2 ceramics codoped with TiC and graphite , 2019, International Journal of Refractory Metals and Hard Materials.

[48]  M. Ahmadian,et al.  Effects of SPS parameters on the densification and mechanical properties of TiB2-SiC composite , 2019, Ceramics International.

[49]  Mehdi Shahedi Asl,et al.  Spark plasma sintering of Al-doped ZrB2–SiC composite , 2019, Ceramics International.

[50]  Seyed Ali Delbari,et al.  Spark plasma sintering of TiN ceramics codoped with SiC and CNT , 2019, Ceramics International.

[51]  H. Aghajani,et al.  Stability and electrophoretic deposition of nano-SiC assisted by PEI , 2019, Journal of Dispersion Science and Technology.

[52]  Zeynab Nasiri,et al.  Microstructure and mechanical behavior of ternary phase ZrB2-SiC-AlN nanocomposite , 2019, International Journal of Refractory Metals and Hard Materials.

[53]  Lai-fei Cheng,et al.  Comparative evaluation of two different methods for thermal shock resistance of laminated ZrB2-SiCw/BN ceramics , 2018, Ceramics International.

[54]  Mehdi Shahedi Asl,et al.  Reinforcing effects of SiC whiskers and carbon nanoparticles in spark plasma sintered ZrB2 matrix composites , 2018, Ceramics International.

[55]  Mehdi Shahedi Asl,et al.  Microstructural development during spark plasma sintering of ZrB2–SiC–Ti composite , 2018, Ceramics International.

[56]  Mehdi Shahedi Asl,et al.  TEM characterization of spark plasma sintered ZrB2–SiC–graphene nanocomposite , 2018, Ceramics International.

[57]  Mehdi Shahedi Asl,et al.  A novel ZrB2–VB2–ZrC composite fabricated by reactive spark plasma sintering , 2018, Materials Science and Engineering: A.

[58]  Shuang Li,et al.  Oxidation behaviour of laminated BN/ZrB2–SiC ceramics , 2018 .

[59]  Mehdi Shahedi Asl,et al.  Effects of carbon additives on the properties of ZrB2–based composites: A review , 2018 .

[60]  Mehdi Shahedi Asl.  A statistical approach towards processing optimization of ZrB2–SiC–graphite nanocomposites. Part I: Relative density , 2018 .

[61]  Mehdi Shahedi Asl,et al.  Effects of nano-graphite content on the characteristics of spark plasma sintered ZrB2–SiC composites , 2018 .

[62]  Tang Lin,et al.  Experimental Investigation of EDM Parameters for ZrB2-SiC Ceramics Machining , 2018 .

[63]  M. G. Kakroudi,et al.  Consolidation and mechanical properties of hot pressed TaC-HfC-VC composites , 2017 .

[64]  Mehdi Shahedi Asl,et al.  Sintering behavior of ZrB2–SiC composites doped with Si3N4: A fractographical approach , 2017 .

[65]  Liu Feng,et al.  R-curve behavior of laminated ZrB2-SiC/Graphite ceramics in two different directions , 2017 .

[66]  M. G. Kakroudi,et al.  Densification, microstructure and mechanical properties of hot pressed tantalum carbide , 2017 .

[67]  Mehdi Shahedi Asl,et al.  Interfacial phenomena and formation of nano-particles in porous ZrB2–40 vol% B4C UHTC , 2016 .

[68]  Mehdi Shahedi Asl,et al.  Temperature dependence of microstructure evolution during hot pressing of ZrB2–30 vol.% SiC composites , 2016 .

[69]  Mehdi Shahedi Asl,et al.  Fractographical characterization of hot pressed and pressureless sintered SiAlON-doped ZrB2-SiC composites , 2015 .

[70]  Mehdi Shahedi Asl,et al.  Significance of hot pressing parameters and reinforcement size on sinterability and mechanical properties of ZrB2–25 vol% SiC UHTCs , 2015 .

[71]  Mehdi Shahedi Asl,et al.  Reactive hot pressing of ZrB2-based composites with changes in ZrO2/SiC ratio and sintering conditions. Part I: Densification behavior , 2015 .

[72]  Lai-fei Cheng,et al.  Mechanical and ablation properties of laminated ZrB2–SiC/BN ceramics , 2015 .

[73]  Mehdi Shahedi Asl,et al.  Significance of hot pressing parameters and reinforcement size on densification behavior of ZrB2–25 vol% SiC UHTCs , 2015 .

[74]  Dong Su,et al.  Preparation and characterization of high temperature SiCN/ZrB2 ceramic composite , 2015 .

[75]  Mehdi Shahedi Asl,et al.  Characterization of hot-pressed graphene reinforced ZrB 2 –SiC composite , 2015 .

[76]  J. Vleugels,et al.  A top-down approach to densify ZrB2–SiC–BN composites with deeper homogeneity and improved reliability , 2014 .

[77]  Xinghong Zhang,et al.  Effects of graphite flake diameter on mechanical properties and thermal shock behavior of ZrB2–nanoSiC–graphite ceramics , 2013 .

[78]  Y. Sakka,et al.  Machinable ZrB2-SiC-BN composites fabricated by reactive spark plasma sintering , 2013 .

[79]  Y. Sakka,et al.  Microstructure and mechanical properties of ZrB2–SiC–BN composites fabricated by reactive hot pressing and reactive spark plasma sintering , 2013 .

[80]  Yao Chen,et al.  Fracture toughness and toughening mechanisms in a (ZrB2-SiC) composite reinforced with boron nitride nanotubes and boron nitride nanoplatelets , 2013 .

[81]  Xinghong Zhang,et al.  The fabrication and mechanical properties of bionic laminated ZrB2–SiC/BN ceramic prepared by tape casting and hot pressing , 2011 .

[82]  Baolin Wang,et al.  Effect of BN grain size on microstructure and mechanical properties of the ZrB2–SiC–BN composites , 2011 .

[83]  W. Zhang,et al.  Fabrication and properties of ZrB2-SiC-BN machinable ceramics , 2010 .

[84]  S. Guo,et al.  Densification of ZrB2-based composites and their mechanical and physical properties: A review , 2009 .

[85]  Xinghong Zhang,et al.  Microstructure and Mechanical Properties of ZrB2-Based Composites Reinforced and Toughened by Zirconia , 2008 .

[86]  William G. Fahrenholtz,et al.  Refractory Diborides of Zirconium and Hafnium , 2007 .