Correlation between ultimate tensile strength and solidification microstructure for the sand cast A357 aluminium alloy

Abstract Many studies have demonstrated a relationship between secondary dendrite arm spacing (SDAS) and the mechanical behaviour of cast aluminium–silicon alloys, both for tensile and fatigue strength. SDAS is related to the solidification time and can be predicted, with a good approximation, by finite-element simulation. However, other microstructural features can affect the tensile behaviour of cast aluminium alloys such as size and morphology of the eutectic Si particles, grain size, composition and morphology of the intermetallic compounds. The present investigation was aimed at finding valuable relationships between ultimate tensile strength and the previously mentioned microstructural parameters for the sand cast A357 aluminium alloy. The microstructural characterization was carried out by optical microscopy and image analysis on more than about 2500 micrographs. Starting from the microstructural parameters and taking into account the material hardness, a relationship able to predict the ultimate tensile strength of the alloy, with an error less than 5%, was found. This relationship can be used to evaluate the local values of the UTS in complex cast components knowing only the hardness and the microstructural parameters, even in positions where the extraction of tensile specimens is not possible.

[1]  Choong Do Lee.  Effects of microporosity on tensile properties of A356 aluminum alloy , 2007 .

[2]  L. Ceschini,et al.  The effect of hot isostatic pressing on the fatigue behaviour of sand-cast A356-T6 and A204-T6 aluminum alloys , 2008 .

[3]  S. Shabestari,et al.  Influence of modification, solidification conditions and heat treatment on the microstructure and mechanical properties of A356 aluminum alloy , 2004 .

[4]  S. Pantelakis,et al.  Quality evaluation of A357 cast aluminum alloy specimens subjected to different artificial aging treatment , 2004 .

[5]  D. Apelian,et al.  Fatigue behavior of A356-T6 aluminum cast alloys. Part I. Effect of casting defects , 2001 .

[6]  J. T. Staley,et al.  On macrohardness testing of Al–7 wt.% Si–Mg alloys: II. An evaluation of models for hardness–yield strength relationships , 2003 .

[7]  C. H. Cáceres,et al.  The fracture mode in Al-Si-Mg casting alloys , 1998 .

[8]  John E. Allison,et al.  Effects of microstructure and temperature on fatigue behavior of E319-T7 cast aluminum alloy in very long life cycles , 2006 .

[9]  P. Uggowitzer,et al.  On the silicon spheroidization in Al-Si alloys , 2002 .

[10]  R. M. Pillai,et al.  Effects of individual and combined additions of Be, Mn, Ca and Sr on the solidification behaviour, structure and mechanical properties of Al–7Si–0.3Mg–0.8Fe alloy , 2007 .

[11]  Diran Apelian,et al.  Fatigue behavior of A356/357 aluminum cast alloys. Part II – Effect of microstructural constituents , 2001 .

[12]  Q. Wang,et al.  The effect of hot isostatic pressing on the microstructure and tensile properties of an unmodified A356-T6 cast aluminum alloy , 2006 .

[13]  H. Ammar,et al.  Effect of casting imperfections on the fatigue life of 319-F and A356-T6 Al–Si casting alloys , 2008 .

[14]  Wislei R. Osório,et al.  Effects of eutectic modification and T4 heat treatment on mechanical properties and corrosion resistance of an Al–9 wt%Si casting alloy , 2007 .

[15]  Henrik Nilsson,et al.  The influence of porosity on the fatigue life for sand and permanent mould cast aluminium , 2006 .

[16]  John L. Campbell,et al.  The influence of structural integrity on the tensile deformation of cast Al-7wt.%Si-0.6wt.%Mg alloys , 2003 .

[17]  A. Samuel,et al.  Parameters controlling the performance of AA319-type alloys: Part I. Tensile properties , 2004 .

[18]  Trevor C. Lindley,et al.  Statistical modeling of microstructure and defect population effects on the fatigue performance of cast A356-T6 automotive components , 2006 .

[19]  Qigui Wang.  Microstructural effects on the tensile and fracture behavior of aluminum casting alloys A356/357 , 2003 .

[20]  S. Shabestari,et al.  Effect of copper and solidification conditions on the microstructure and mechanical properties of Al–Si–Mg alloys , 2004 .

[21]  P. Rometsch,et al.  An age hardening model for Al–7Si–Mg casting alloys , 2002 .