Biomechanical Assessment of Human Cervical Spine Ligaments

More data is needed to define the soft tissue components of the human cervical spine to develop and exercise mathematical analogs such as the finite element model. This study sought to determine the geometrical and biomechanical properties of spinal ligaments from the axis to the first thoracic level. 35 human cadavers were used in the study. Data were obtained for anterior and posterior longitudinal ligaments, joint capsules, ligamentum flavum, and interspinous ligament. Cryomicrotomy techniques were used to determine the geometrical characteristic. Biomechanical tests involved conducting failure tensile tests at a quasistatic rate of 10 mm/sec using in situ principles. Anterior and posterior longitudinal ligaments responded with the highest length measurements in both regions of the spine. The ligamentum flavum and joint capsules exhibited the highest area of cross-section. All ligaments demonstrated increasing cross-sectional areas in the lower cervical group compared to the mid-cervical group. Stiffness parameters were higher in the mid-cervical region than in the lower cervical region for the anterior longitudinal and interspinous ligaments and ligamentum flavum, while the reverse was true for the other ligaments. Energy was higher in the lower cervical region than in the mid-cervical region for the joint capsules, ligamentum flavum, interspinous ligament, and anterior longitudinal ligament. Anterior and longitudinal ligaments responded with the highest stress followed by the joint capsules, interspinous ligament, and ligamentum flavum. This study provides important fundamental data on the properties of human cervical spine ligaments.

[1]  A. Sances,et al.  Experimental Spinal Injuries with Vertical Impact , 1986, Spine.

[2]  Riender Happee,et al.  The influence of muscle activity on head-neck response during impact , 1997 .

[3]  G Ray,et al.  Mathematical and finite element analysis of spine injuries. , 1987, Critical reviews in biomedical engineering.

[4]  M Guillot,et al.  Biomechanical properties of spinal ligaments and a histological study of the supraspinal ligament in traction. , 1985, Journal of biomechanics.

[5]  de Mkj Marko Jager,et al.  A Global and a Detailed Mathematical Model for Head-Neck Dynamics , 1996 .

[6]  N Yoganandan,et al.  Finite element model of the human lower cervical spine: parametric analysis of the C4-C6 unit. , 1997, Journal of biomechanical engineering.

[7]  N Yoganandan,et al.  Finite element modeling of the C4-C6 cervical spine unit. , 1996, Medical engineering & physics.

[8]  Srirangam Kumaresan,et al.  Methodology to Quantify Human Cervical Spine Uncovertebral Joint Anatomy , 1997 .

[9]  A Elhagediab,et al.  Biomechanical properties of human lumbar spine ligaments. , 1992, Journal of biomechanics.

[10]  Frank A. Pintar,et al.  AGE-SPECIFIC PEDIATRIC CERVICAL SPINE BIOMECHANICAL RESPONSES: THREE-DIMENSIONAL NONLINEAR FINITE ELEMENT MODELS , 1997 .

[11]  N. Yoganandan,et al.  Finite element applications in human cervical spine modeling. , 1996, Spine.

[12]  N Yoganandan,et al.  Finite element analysis of anterior cervical spine interbody fusion. , 1997, Bio-medical materials and engineering.

[13]  A. Sances,et al.  Tensile Strength of Spinal Ligaments , 1988, Spine.

[14]  A. Sances,et al.  Dynamic Response of Human Cervical Spine Ligaments , 1989, Spine.

[15]  G A Dumas,et al.  In situ mechanical behavior of posterior spinal ligaments in the lumbar region. An in vitro study. , 1987, Journal of biomechanics.

[16]  Tawfik B. Khalil,et al.  Simulation of the Hybrid III Dummy Response to Impact by Nonlinear Finite Element Analysis , 1994 .

[17]  S L Woo,et al.  Quantitative Anthropometry of the Subatlantal Cervical Longitudinal Ligaments , 1998, Spine.

[18]  Srirangam Kumaresan,et al.  Paediatric Neck Modelling Using Finite Element Analysis , 1997 .

[19]  Eberhard Haug,et al.  Validation of a finite-element-model of the human neck , 1997 .

[20]  N Yoganandan,et al.  Finite element modeling of cervical laminectomy with graded facetectomy. , 1997, Journal of spinal disorders.

[21]  de Mkj Marko Jager,et al.  A THREE-DIMENSIONAL HEAD-NECK MODEL: VALIDATION FOR FRONTAL AND LATERAL IMPACTS , 1994 .

[22]  M M Panjabi,et al.  Quantitative anatomy of cervical spine ligaments. Part II. Middle and lower cervical spine. , 1991, Journal of spinal disorders.

[23]  N Yoganandan,et al.  Finite element modeling approaches of human cervical spine facet joint capsule. , 1998, Journal of biomechanics.

[24]  B A Winkelstein,et al.  Epidemiology, classification, mechanism, and tolerance of human cervical spine injuries. , 1995, Critical reviews in biomedical engineering.