Multiaxial fatigue assessment based on a short crack growth concept

Abstract The fatigue life to initiate a crack of technical size is interpreted as a pure growth process of a mechanically short crack. A set of equations and corresponding simulation procedures are outlined which can be used to assess multiaxial, in especially including non-proportional variable amplitude loading of notched components. The prediction accuracy of this approach is compared to the accuracy of other approaches. The comparison was performed using experimental data recently published in a comprehensive investigation performed by Franz and Xin.

[1]  Tim Topper,et al.  Effective strain–fatigue life data for variable amplitude fatigue , 1997 .

[2]  Ewald Macha,et al.  Verification of fatigue critical plane position according to variance and damage accumulation methods under multiaxial loading , 2014 .

[3]  Darrell F. Socie,et al.  Crack nucleation and growth modeling in biaxial fatigue , 1988 .

[4]  K. Miller THE SHORT CRACK PROBLEM , 1982 .

[5]  Toshihiko Hoshide,et al.  LIFE PREDICTION BY SIMULATION OF CRACK GROWTH IN NOTCHED COMPONENTS WITH DIFFERENT MICROSTRUCTURES AND UNDER MULTIAXIAL FATIGUE , 1998 .

[6]  D. L. McDiarmid,et al.  A SHEAR STRESS BASED CRITICAL‐PLANE CRITERION OF MULTIAXIAL FATIGUE FAILURE FOR DESIGN AND LIFE PREDICTION , 1994 .

[7]  Andrea Carpinteri,et al.  Size effect in S–N curves: A fractal approach to finite-life fatigue strength , 2009 .

[8]  Michael Vormwald,et al.  Short fatigue crack growth under nonproportional multiaxial elastic–plastic strains , 2006 .

[9]  Michael Vormwald,et al.  A Fracture Mechanics Based Model for Cumulative Damage Assessment as Part of Fatigue Life Prediction , 1992 .

[10]  T. Topper,et al.  Prediction of crack opening stress levels for 1045 quenched and tempered steel under service loading spectra , 2006 .

[11]  P. C. Paris,et al.  The fracture mechanics approach to fatigue. , 1964 .

[12]  K. N. Smith A Stress-Strain Function for the Fatigue of Metals , 1970 .

[13]  Michael Vormwald,et al.  Verformungsverhalten und rechnerische Abschätzung der Ermüdungslebensdauer metallischer Werkstoffe unter mehrachsig nichtproportionaler Beanspruchung , 2002 .

[14]  Michael Vormwald,et al.  Kurzrisswachstum bei mehrachsig nichtproportionaler Beanspruchung , 2001 .

[15]  Harald Zenner,et al.  Mikrorissentstehung und Mikrorisswachstum in Aluminiumlegierungen bei zyklischer Beanspruchung: Werkstoffliche Untersuchung und Simulation , 2002 .

[16]  Michael Vormwald,et al.  Short crack approach for multiaxial fatigue assessment , 2008 .

[17]  J. Newman A crack opening stress equation for fatigue crack growth , 1984 .

[18]  Michael Vormwald,et al.  A plasticity model for calculating stress–strain sequences under multiaxial nonproportional cyclic loading , 2003 .

[19]  Andrea Carpinteri,et al.  Multiaxial fatigue life estimation in welded joints using the critical plane approach , 2009 .

[20]  A. Carpinteri,et al.  Structural integrity assessment of metallic components under multiaxial fatigue: the C–S criterion and its evolution , 2012 .

[21]  A. K. Lynn,et al.  Computer simulation of variable amplitude fatigue crack initiation behaviour using a new strain-based cumulative damage model , 2002 .

[22]  Georgios Savaidis,et al.  CONSIDERATION OF MULTIAXIALITY IN FATIGUE LIFE PREDICTION USING THE CLOSURE CONCEPT , 1997 .

[23]  Michael Vormwald,et al.  Review of fatigue crack growth under non-proportional mixed-mode , 2014 .

[24]  Michael Vormwald,et al.  Deformation behaviour, short crack growth and fatigue livesunder multiaxial nonproportional loading , 2006 .

[25]  Darrell F. Socie,et al.  MIXED MODE SMALL CRACK GROWTH , 1987 .

[26]  H. Zenner,et al.  Berechnung der Dauerschwingfestigkeit unter Berücksichtigung der spannungsmechanischen und statistischen Stützziffer , 1991 .

[27]  Deformation und Versagen von StE460 und AlMg4,5Mn bei mehrachsig‐proportionalen Beanspruchungen mit konstanten und variablen Amplituden , 1996 .

[28]  C Boller,et al.  Materials Data for Cyclic Loading , 1990 .

[29]  Darrell F. Socie,et al.  PSEUDO STRESS AND PSEUDO STRAIN BASED APPROACHES TO MULTIAXIAL NOTCH ANALYSIS , 2007 .

[30]  David L. McDowell,et al.  Multiaxial small fatigue crack growth in metals , 1997 .

[31]  Andrea Carpinteri,et al.  Multiaxial fatigue assessment using a simplified critical plane-based criterion , 2011 .

[32]  Michael Vormwald,et al.  A unified expression of elastic-plastic notch stress-strain calculation in bodies subjected to multiaxial , 2008 .

[33]  Andrea Carpinteri,et al.  An approach to size effect in fatigue of metals using fractal theories , 2002 .

[34]  Andrea Carpinteri,et al.  Reformulation in the frequency domain of a critical plane-based multiaxial fatigue criterion , 2014 .

[35]  Andrea Carpinteri,et al.  Surface cracks in notched round bars under cyclic tension and bending , 2006 .

[36]  Harald Zenner,et al.  Simulation des Mikrorisswachstums unter Schwingbeanspruchung. Teil 1: Modell und Simulationsergebnisse, Mikrorisswachstum, Streuung, Einfluss von Beanspruchungsart und ‐höhe, Risskeimdichte und Korngröße , 2001 .

[37]  David L. McDowell,et al.  A MICROCRACK GROWTH LAW FOR MULTIAXIAL FATIGUE , 1996 .

[38]  T. Seeger,et al.  THE CONSEQUENCES OF SHORT CRACK CLOSURE ON FATIGUE CRACK GROWTH UNDER VARIABLE AMPLITUDE LOADING , 1991 .

[39]  David Taylor,et al.  Notch fatigue behaviour in cast irons explained using a fracture mechanics approach , 1996 .

[40]  Michael Vormwald,et al.  Short-crack-growth-based fatigue assessment of notched components under multiaxial variable amplitude loading , 2011 .

[41]  A. Fatemi,et al.  A CRITICAL PLANE APPROACH TO MULTIAXIAL FATIGUE DAMAGE INCLUDING OUT‐OF‐PHASE LOADING , 1988 .

[42]  Darrell F. Socie,et al.  Fatigue Damage Simulation Models for Multiaxial Loading , 1996 .

[43]  Tim Topper,et al.  Fatigue of cast aluminium alloys under constant and variable-amplitude loading , 1996 .

[44]  Ewald Macha,et al.  A survey of failure criteria and parameters in mixed-mode fatigue crack growth , 2009 .

[45]  Michael Vormwald,et al.  Notch stress and strain approximation procedures for application with multiaxial nonproportional loading , 2005 .

[46]  Arne Fjeldstad,et al.  Simulation of fatigue crack growth in components with random defects , 2008 .

[47]  Arne Fjeldstad,et al.  A post-processor for fatigue crack growth analysis based on a finite element stress field , 2008 .

[48]  Ja Bannantine,et al.  A Multiaxial Fatigue Life Estimation Technique , 1992 .

[49]  Darrell F. Socie,et al.  Mechanics of mixed mode small fatigue crack growth , 1987 .

[50]  C. Wüthrich,et al.  The extension of the J-integral concept to fatigue cracks , 1982 .

[51]  Michael Vormwald,et al.  Statistical and geometrical size effects in notched members based on weakest-link and short-crack modelling , 2012 .