Wear behavior and mechanism of TiB2-based ceramic inserts in high-speed cutting of Ti6Al4V alloy

[1]  Chengyong Wang,et al.  Cutting performance and wear mechanism of TiB2-B4C ceramic cutting tools in high speed turning of Ti6Al4V alloy , 2018, Ceramics International.

[2]  C. Czettl,et al.  Knowledge based coating design of CVD TiN-TiBN-TiB2 architecture , 2018 .

[3]  G. Poulachon,et al.  Understanding the diffusion wear mechanisms of WC-10%Co carbide tools during dry machining of titanium alloys , 2017 .

[4]  S. Veldhuis,et al.  Tribological and Wear Performance of Carbide Tools with TiB2 PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy , 2017 .

[5]  Y. Sakka,et al.  Ultra-high elevated temperature strength of TiB2-based ceramics consolidated by spark plasma sintering , 2017 .

[6]  P. Feng,et al.  The influences of tool wear on Ti6Al4V cutting temperature and burn defect , 2016 .

[7]  S. Palanisamy,et al.  Tool wear mechanisms involved in crater formation on uncoated carbide tool when machining Ti6Al4V alloy , 2016 .

[8]  Ľ. Bača,et al.  Effect of metallic dopants on the microstructure and mechanical properties of TiB2 , 2015 .

[9]  Chuanzhen Huang,et al.  Effects of TiC content and melt phase on microstructure and mechanical properties of ternary TiB2-based ceramic cutting tool materials , 2014 .

[10]  Wei Zhou,et al.  Influence of cutting speed on cutting force, flank temperature, and tool wear in end milling of Ti-6Al-4V alloy , 2014 .

[11]  M. Ohno,et al.  Phase Evolution, Microstructure and Hardness of TiB2-based Co-containing Composite by SHS under Pseudo-isostatic Pressure , 2012 .

[12]  M. Öveçoğlu,et al.  Influences of metallic Co and mechanical alloying on the microstructural and mechanical properties of TiB2 ceramics prepared via pressureless sintering , 2012 .

[13]  Bin Zou,et al.  Effects of sintering additives on microstructure and mechanical properties of TiB2–WC ceramic–metal composite tool materials , 2012 .

[14]  S. I. Jaffery,et al.  Wear mechanisms analysis for turning Ti-6Al-4V—towards the development of suitable tool coatings , 2012 .

[15]  A. Mukhopadhyay,et al.  Densification and high-temperature mechanical properties of hot pressed TiB2–(0–10 wt.%) MoSi2 composites , 2009 .

[16]  N. Fang,et al.  A comparative study of the cutting forces in high speed machining of Ti–6Al–4V and Inconel 718 with a round cutting edge tool , 2009 .

[17]  T. Grande,et al.  The Effect of Surface Oxides During Hot Pressing of TiB2 , 2009 .

[18]  P. Arrazola,et al.  Machinability of titanium alloys (Ti6Al4V and Ti555.3) , 2009 .

[19]  Mohammed Nouari,et al.  Tribo-energetic correlation of tool thermal properties to wear of WC-Co inserts in high speed dry machining of aeronautical grade titanium alloys , 2009 .

[20]  Song Wenlong,et al.  Diffusion wear in dry cutting of Ti–6Al–4V with WC/Co carbide tools , 2008 .

[21]  Suhas S. Joshi,et al.  Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718 , 2008 .

[22]  A. K. Suri,et al.  Processing and properties of monolithic TiB2 based materials , 2006 .

[23]  Paul Mativenga,et al.  Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining , 2006 .

[24]  P. Molian,et al.  Lathe Turning of Titanium Using Pulsed Laser Deposited, Ultra‐Hard Boride Coatings of Carbide Inserts , 2003 .

[25]  Gérard Poulachon,et al.  Wear Mechanisms of New Tool Materials for Ti-6AI-4V High Performance Machining , 2003 .

[26]  S. Luyckx,et al.  Results from bending tests on submicron and micron WC–Co grades at elevated temperatures , 2002 .

[27]  D. Mari,et al.  Experimental strategy to study the mechanical behaviour of hardmetals for cutting tools , 1999 .

[28]  E. A. Charles,et al.  Fracture Toughness Determinations by Indentation , 1976 .