Tool rake face temperature distribution when machining Ti6Al4V and Inconel 718

Procedia Manufacturing is an open access journal focusing entirely on publishing high quality conference proceedings. Procedia Manufacturing enables fast dissemination of its content so that conference delegates can publish their papers in a dedicated online issue on Sciverse ScienceDirect under the Creative Commons license BY-NC-ND (for further details see our open access license policy.)

[1]  Infrared temperature measurement on diamond-coated tools during machining , 1994 .

[2]  E. Trent,et al.  Temperature distribution in tools used for cutting iron, titanium and nickel , 1975 .

[3]  M. Lahres,et al.  Quantitative measurement of temperatures on diamond-coated tools during machining , 1995 .

[4]  T. Kitagawa,et al.  Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti6Al6V2Sn , 1997 .

[5]  V. Madhavan,et al.  Infrared Thermography of the Chip-Tool Interface through Transparent Cutting Tools | NIST , 2014 .

[6]  R. Komanduri,et al.  A review of the experimental techniques for the measurement of heat and temperatures generated in some manufacturing processes and tribology , 2001 .

[7]  M. Cemal Cakir,et al.  Thermocouple and Infrared Sensor-Based Measurement of Temperature Distribution in Metal Cutting , 2015, Sensors.

[8]  Thejas Menon.  Full-field infrared thermography at tool-chip interface through transparent cutting tool while machining TI-6AL-4V , 2013 .

[9]  Mark R. Miller,et al.  Experimental Cutting Tool Temperature Distributions , 2003 .

[10]  E. M. Trent,et al.  Metallurgical appraisal of wear mechanisms and processes on high-speed-steel cutting tools , 1974 .

[11]  G. Greene,et al.  Total hemispherical emissivity of oxidized Inconel 718 in the temperature range 300-1000°C , 2000 .

[12]  J. H. Dautzenberg,et al.  Temperature measurement in orthogonal metal cutting , 1998 .

[13]  Brandon M. Lane,et al.  Uncertainty of temperature measurements by infrared thermography for metal cutting applications , 2013 .

[14]  Guy Sutter,et al.  Temperature fields in a chip during high-speed orthogonal cutting—An experimental investigation , 2007 .

[15]  G. Boothroyd.  Temperatures in Orthogonal Metal Cutting , 1963 .

[16]  V. C. Raj,et al.  Measurement of surface temperature and emissivity of different materials by two-colour pyrometry. , 2013, Review of Scientific Instruments.

[17]  E. G. Herbert.  The Measurement of Cutting Temperatures , 1926 .

[18]  Tony L. Schmitz,et al.  Calibrated Thermal Microscopy of the Tool–Chip Interface in Machining , 2000 .