Wideband high-isolation SPDT RF switch in 0.18-$$\upmu$$μm SiGe BiCMOS technology

A single pole double throw (SPDT) RF switch working in wide band is presented. The SPDT RF switch composed of many single pole single throw (SPST) switches changes the signal flow corresponding to control signals. It is very important to obtain low insertion loss and high power driving capability for dealing with the input signal of wide dynamic range. High isolation is also desirable for suppressing leakage of unwanted signal going through the off-state path. To achieve low insertion loss, the heterojunction bipolar transistor (HBT) along with MOSFET in SiGe BiCMOS process is employed. HBT shows inherently considerably high impedance between collector and emitter terminals when it turns off, so that RF signals leak less through the off-state path. The insertion loss of the proposed SPDT RF switch is maintained less than 2 dB over frequency range of interest. This RF switch cancels leakage signals coming out of the off-state paths, leading to isolation improvement. For leakage cancellation, transformer and common-base structure are employed. In addition, SPST switches are adopted in parallel with inductors for decreasing the phase deviation of the passing signal. Since the RF switch using MOSFET shows worse isolation as frequency increases, leakage signal cancellation is designed to work in higher frequency region for obtaining wideband operation. A high isolation is obtained over 23 dB in measurement. This RF switch operates from 1 to 8 GHz providing low insertion loss. In this design, 0.18-$$\upmu$$μm SiGe BiCMOS process is used and the proposed RF switch occupies the area of 0.3 mm$$^{2}$$2.

[1]  R. Weigel,et al.  Highly linear robust RF switch with low insertion loss and high power handling capability in a 65nm CMOS technology , 2012, 2012 IEEE 12th Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems.

[2]  D. An,et al.  Hybrid ring coupler for W-band MMIC applications using MEMS technology , 2005, IEEE Microwave and Wireless Components Letters.

[3]  Byeong Wan Ha,et al.  High-Isolation SPDT RF Switch Using Inductive Switching and Leakage Signal Cancellation , 2014 .

[4]  J. Cressler,et al.  A 94 GHz, 1.4 dB Insertion Loss Single-Pole Double-Throw Switch Using Reverse-Saturated SiGe HBTs , 2014, IEEE Microwave and Wireless Components Letters.

[5]  John Cressler,et al.  A high-linearity inverse-mode SiGe BiCMOS RF switch , 2010, 2010 IEEE Bipolar/BiCMOS Circuits and Technology Meeting (BCTM).

[6]  Zuo-Min Tsai,et al.  Design and analysis for a miniature CMOS SPDT switch using body-floating technique to improve power performance , 2006, IEEE Transactions on Microwave Theory and Techniques.

[7]  Kaixue Ma,et al.  A Miniaturized Millimeter-Wave Standing-Wave Filtering Switch With High P1dB , 2013, IEEE Transactions on Microwave Theory and Techniques.

[8]  Charles F. Campbell,et al.  Wideband high power GaN on SiC SPDT switch MMICs , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[9]  Yu-Liang Wu,et al.  General Models and a Reduction Design Technique for FPGA Switch Box Designs , 2003, IEEE Trans. Computers.

[10]  Sanghoon Sim,et al.  A Compact X-Band Bi-Directional Phased-Array T/R Chipset in 0.13 $\mu{\hbox {m}}$ CMOS Technology , 2013, IEEE Transactions on Microwave Theory and Techniques.

[11]  H. Shigematsu,et al.  GaN single-chip transceiver frontend MMIC for X-band applications , 2012, 2012 IEEE/MTT-S International Microwave Symposium Digest.

[12]  Cam Nguyen,et al.  New Ultra-High-Isolation RF Switch Architecture and Its Use for a 10–38-GHz 0.18-$\mu$m BiCMOS Ultra-Wideband Switch , 2011, IEEE Transactions on Microwave Theory and Techniques.

[13]  M. Ruberto,et al.  A CMOS Bidirectional 32-Element Phased-Array Transceiver at 60 GHz With LTCC Antenna , 2012, IEEE Transactions on Microwave Theory and Techniques.

[14]  Behzad Razavi,et al.  Design of Analog CMOS Integrated Circuits , 1999 .

[15]  B. H. Ahmad,et al.  Design and analysis of broadband high isolation of discrete packaged PIN diode SPDT switch for wireless data communication , 2011, 2011 IEEE International RF & Microwave Conference.

[16]  Zuo-Min Tsai,et al.  A miniature low-insertion-loss, high-power CMOS SPDT switch using floating-body technique for 2.4- and 5.8-GHz applications , 2005, 2005 IEEE Radio Frequency integrated Circuits (RFIC) Symposium - Digest of Papers.

[17]  Gabriel M. Rebeiz,et al.  A Low-Loss 50–70 GHz SPDT Switch in 90 nm CMOS , 2009, IEEE Journal of Solid-State Circuits.

[18]  R. Lai,et al.  Compact ka-band bi-directional amplifier for low-cost electronic scanning array antenna , 2004, IEEE Journal of Solid-State Circuits.