Direct Comparison of the Structural Compression Characteristics of Natural and Synthetic Fiber-Epoxy Composites: Flax, Jute, Hemp, Glass and Carbon Fibers
暂无分享,去创建一个
[1] M. Bambach. Durability of natural fibre epoxy composite structural columns: High cycle compression fatigue and moisture ingress , 2020 .
[2] V. Thakur,et al. Chemistry, Structures, and Advanced Applications of Nanocomposites from Biorenewable Resources. , 2020, Chemical reviews.
[3] D. Soulat,et al. Development and Multiscale Characterization of 3D Warp Interlock Flax Fabrics with Different Woven Architectures for Composite Applications , 2020, Fibers.
[4] A. Manaia,et al. Industrial Hemp Fibers: An Overview , 2019 .
[5] Nauman Wahab,et al. Performance of Concrete Confined with a Jute–Polyester Hybrid Fiber Reinforced Polymer Composite: A Novel Strengthening Technique , 2019, Fibers.
[6] Michael R. Bambach,et al. Geometric optimisation and compression design of natural fibre composite structural channel sections , 2018 .
[7] M. Bambach. Compression strength of natural fibre composite plates and sections of flax, jute and hemp , 2017 .
[8] K. Pickering,et al. A review of recent developments in natural fibre composites and their mechanical performance , 2016 .
[9] Colin MacDougall,et al. Flexural Behavior of Sandwich Panels with Bio-FRP Skins Made of Flax Fibers and Epoxidized Pine-Oil Resin , 2015 .
[10] Mizi Fan,et al. Compressive behaviour of natural fibre composite , 2014 .
[11] S. Amico,et al. Mechanical behavior and correlation between dynamic fragility and dynamic mechanical properties of curaua fiber composites , 2013 .
[12] Nawawi Chouw,et al. Crashworthiness characteristics of flax fibre reinforced epoxy tubes for energy absorption application , 2013 .
[13] Mike Clifford,et al. Can flax replace E-glass in structural composites? A small wind turbine blade case study , 2013 .
[14] Libo Yan,et al. Behavior and analytical modeling of natural flax fibre-reinforced polymer tube confined plain concrete and coir fibre-reinforced concrete , 2013 .
[15] S. Amico,et al. Short beam strength of curaua, sisal, glass and hybrid composites , 2013 .
[16] A. Błędzki,et al. Biocomposites reinforced with natural fibers: 2000–2010 , 2012 .
[17] P. Davies,et al. PLLA/Flax Mat/Balsa Bio-Sandwich Manufacture and Mechanical Properties , 2011 .
[18] N. Uddin,et al. Manufacturing and Structural Feasibility of Natural Fiber Reinforced Polymeric Structural Insulated Panels for Panelized Construction , 2011 .
[19] Hao Wang,et al. A review on the tensile properties of natural fiber reinforced polymer composites , 2011 .
[20] W. Hall,et al. A review of bast fibres and their composites. Part 1 – Fibres as reinforcements , 2010 .
[21] W. Hall,et al. A review of bast fibres and their composites. Part 2 - Composites , 2010 .
[22] M. Bambach. Axial capacity and crushing of thin-walled metal, fibre–epoxy and composite metal–fibre tubes , 2010 .
[23] V. Thakur,et al. Fabrication and characterization of S. cilliare fibre reinforced polymer composites , 2009 .
[24] Michael R. Bambach,et al. Photogrammetry measurements of buckling modes and interactions in channels with edge-stiffened flanges , 2009 .
[25] V. Thakur,et al. Physical, Chemical and Mechanical Properties of Hibiscus sabdariffa Fiber/Polymer Composite , 2009 .
[26] H. Hargitai,et al. Development of HEMP Fiber Reinforced Polypropylene Composites , 2008 .
[27] Kristiina Oksman,et al. High Quality Flax Fibre Composites Manufactured by the Resin Transfer Moulding Process , 2001 .
[28] J. d’Almeida,et al. Effect of Water Absorption on the Mechanical Properties of Sisal and Jute Fiber Composites , 1999 .
[29] Paul M. Weaver,et al. Green composites: A review of material attributes and complementary applications , 2014 .
[30] Libo Yan,et al. Flax fibre and its composites – A review , 2014 .