Tubular perfusion system for the long-term dynamic culture of human mesenchymal stem cells.

In vitro culture techniques must be improved to increase the feasibility of cell-based tissue engineering strategies. To enhance nutrient transport we have developed a novel bioreactor, the tubular perfusion system (TPS), to culture human mesenchymal stem cells (hMSCs) in three-dimensional scaffolds. This system utilizes an elegant design to create a more effective environment for cell culture. In our design, hMSCs in the TPS bioreactor are encapsulated in alginate beads that are tightly packed in a tubular growth chamber. The medium is perfused by a peristaltic pump through the growth chamber and around the tightly packed scaffolds enhancing nutrient transfer while exposing the cells to shear stress. Results demonstrate that bioreactor culture supports early osteoblastic differentiation of hMSCs as shown by alkaline phosphatase gene expression. After 14 and 28 days of culture significant increases in the gene expression levels of osteocalcin, osteopontin, and bone morphogenetic protein-2 were observed with bioreactor culture, and expression of these markers was shown to increase with media flow rate. These results demonstrate the TPS bioreactor as an effective means to culture hMSCs and provide insight to the effect of long-term shear stresses on differentiating hMSCs.

[1]  Antonios G. Mikos,et al.  Fluid flow increases mineralized matrix deposition in 3D perfusion culture of marrow stromal osteoblasts in a dose-dependent manner , 2002, Proceedings of the National Academy of Sciences of the United States of America.

[2]  David Dean,et al.  Effect of initial cell seeding density on early osteogenic signal expression of rat bone marrow stromal cells cultured on cross-linked poly(propylene fumarate) disks. , 2009, Biomacromolecules.

[3]  Antonios G Mikos,et al.  In vitro generated extracellular matrix and fluid shear stress synergistically enhance 3D osteoblastic differentiation. , 2006, Proceedings of the National Academy of Sciences of the United States of America.

[4]  N. Kawazoe,et al.  Osteogenic differentiation of human mesenchymal stem cells on chargeable polymer-modified surfaces. , 2008, Journal of biomedical materials research. Part A.

[5]  Jos Malda,et al.  The roles of hypoxia in the in vitro engineering of tissues. , 2007, Tissue engineering.

[6]  Antonios G Mikos,et al.  Flow perfusion culture of marrow stromal osteoblasts in titanium fiber mesh. , 2003, Journal of biomedical materials research. Part A.

[7]  John P Fisher,et al.  Tissue response and orbital floor regeneration using cyclic acetal hydrogels. , 2009, Journal of biomedical materials research. Part A.

[8]  Antonios G Mikos,et al.  Design of a flow perfusion bioreactor system for bone tissue-engineering applications. , 2003, Tissue engineering.

[9]  M. Casal,et al.  Bone morphogenetic proteins in tissue engineering: the road from laboratory to clinic, part II (BMP delivery) , 2008, Journal of tissue engineering and regenerative medicine.

[10]  Ivan Martin,et al.  Bioreactor-based roadmap for the translation of tissue engineering strategies into clinical products. , 2009, Trends in biotechnology.

[11]  Moustapha Kassem,et al.  Effect of dynamic 3-D culture on proliferation, distribution, and osteogenic differentiation of human mesenchymal stem cells. , 2008, Journal of biomedical materials research. Part A.

[12]  W. Mutschler,et al.  Hypoxia in static and dynamic 3D culture systems for tissue engineering of bone. , 2008, Tissue engineering. Part A.

[13]  Rui L. Reis,et al.  Bone Tissue Engineering Constructs Based on Starch Scaffolds and Bone Marrow Cells Cultured in a Flow Perfusion Bioreactor , 2006 .

[14]  John P Fisher,et al.  Effect of construct properties on encapsulated chondrocyte expression of insulin-like growth factor-1. , 2007, Biomaterials.

[15]  M. Kassem,et al.  Flow perfusion culture of human mesenchymal stem cells on silicate-substituted tricalcium phosphate scaffolds. , 2008, Biomaterials.

[16]  Clemens A van Blitterswijk,et al.  A perfusion bioreactor system capable of producing clinically relevant volumes of tissue-engineered bone: in vivo bone formation showing proof of concept. , 2005, Biomaterials.

[17]  Antonios G. Mikos,et al.  Mineralized matrix deposition by marrow stromal osteoblasts in 3D perfusion culture increases with increasing fluid shear forces , 2003, Proceedings of the National Academy of Sciences of the United States of America.

[18]  Tzu-Wei Wang,et al.  Regulation of adult human mesenchymal stem cells into osteogenic and chondrogenic lineages by different bioreactor systems. , 2009, Journal of biomedical materials research. Part A.

[19]  Chrysanthi Williams,et al.  Perfusion bioreactor for small diameter tissue-engineered arteries. , 2004, Tissue engineering.

[20]  R L Reis,et al.  Bone morphogenetic proteins in tissue engineering: the road from the laboratory to the clinic, part I (basic concepts) , 2008, Journal of tissue engineering and regenerative medicine.

[21]  M. Matsumura,et al.  Oxygen diffusivity in gel beads containing viable cells , 1989, Biotechnology and bioengineering.

[22]  Antonios G Mikos,et al.  Formation of three-dimensional cell/polymer constructs for bone tissue engineering in a spinner flask and a rotating wall vessel bioreactor. , 2002, Journal of biomedical materials research.

[23]  John P Fisher,et al.  Macroporous hydrogels upregulate osteogenic signal expression and promote bone regeneration. , 2010, Biomacromolecules.

[24]  Gordana Vunjak-Novakovic,et al.  Effects of initial seeding density and fluid perfusion rate on formation of tissue-engineered bone. , 2008, Tissue engineering. Part A.

[25]  G. Truskey,et al.  Transport phenomena in biological systems , 2004 .

[26]  D. Kaplan,et al.  Role of adult mesenchymal stem cells in bone tissue engineering applications: current status and future prospects. , 2005, Tissue engineering.

[27]  Ralf Pörtner,et al.  Bioreactor design for tissue engineering. , 2005, Journal of bioscience and bioengineering.

[28]  J. Fisher,et al.  Addition of hyaluronic acid to alginate embedded chondrocytes interferes with insulin-like growth factor-1 signaling in vitro and in vivo. , 2009, Tissue engineering. Part A.

[29]  Antonios G. Mikos,et al.  Flow Perfusion Enhances the Calcified Matrix Deposition of Marrow Stromal Cells in Biodegradable Nonwoven Fiber Mesh Scaffolds , 2005, Annals of Biomedical Engineering.

[30]  K. Lau,et al.  Fluid flow shear stress stimulates human osteoblast proliferation and differentiation through multiple interacting and competing signal transduction pathways. , 2003, Bone.

[31]  Mel S. Lee,et al.  Development of a biodegradable alginate carrier system for antibiotics and bone cells , 2007, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[32]  Richard M. Shelton,et al.  Evaluation of sodium alginate for bone marrow cell tissue engineering. , 2003, Biomaterials.

[33]  Feng Zhao,et al.  Effects of Oxygen Transport on 3‐D Human Mesenchymal Stem Cell Metabolic Activity in Perfusion and Static Cultures: Experiments and Mathematical Model , 2008, Biotechnology progress.

[34]  D. Wendt,et al.  The role of bioreactors in tissue engineering. , 2004, Trends in biotechnology.

[35]  M J Yaszemski,et al.  Bone formation by three-dimensional stromal osteoblast culture in biodegradable polymer scaffolds. , 1997, Journal of biomedical materials research.

[36]  J. Fisher,et al.  Effects of exogenous IGF-1 delivery on the early expression of IGF-1 signaling molecules by alginate embedded chondrocytes. , 2008, Tissue engineering. Part A.

[37]  Cato T Laurencin,et al.  Bioreactor-based bone tissue engineering: the influence of dynamic flow on osteoblast phenotypic expression and matrix mineralization. , 2004, Proceedings of the National Academy of Sciences of the United States of America.

[38]  Gordana Vunjak-Novakovic,et al.  Bone Tissue Engineering Using Human Mesenchymal Stem Cells: Effects of Scaffold Material and Medium Flow , 2004, Annals of Biomedical Engineering.

[39]  T. Westin,et al.  Long-Term Sequelae after Surgery for Orbital Floor Fractures , 1999, Otolaryngology--head and neck surgery : official journal of American Academy of Otolaryngology-Head and Neck Surgery.

[40]  John P Fisher,et al.  Macroporous hydrogel scaffolds and their characterization by optical coherence tomography. , 2011, Tissue engineering. Part C, Methods.

[41]  Antonios G Mikos,et al.  Effect of flow perfusion on the osteogenic differentiation of bone marrow stromal cells cultured on starch-based three-dimensional scaffolds. , 2003, Journal of biomedical materials research. Part A.

[42]  J. Ando,et al.  In vitro maturation of "biotube" vascular grafts induced by a 2-day pulsatile flow loading. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

[43]  Timothy M. Wick,et al.  Endothelial Cell–Smooth Muscle Cell Co-Culture in a Perfusion Bioreactor System , 2005, Annals of Biomedical Engineering.

[44]  F Meuwly,et al.  Packed-bed bioreactors for mammalian cell culture: bioprocess and biomedical applications. , 2007, Biotechnology advances.

[45]  R. Soares,et al.  Immobilization of human mesenchymal stem cells within RGD-grafted alginate microspheres and assessment of their angiogenic potential. , 2010, Biomacromolecules.

[46]  K. Dai,et al.  Effects of flow shear stress and mass transport on the construction of a large-scale tissue-engineered bone in a perfusion bioreactor. , 2009, Tissue engineering. Part A.

[47]  J. Fisher,et al.  Bone tissue engineering bioreactors: dynamic culture and the influence of shear stress. , 2011, Bone.

[48]  Bernhard O. Palsson,et al.  Determination of specific oxygen uptake rates in human hematopoietic cultures and implications for bioreactor design , 1996, Annals of Biomedical Engineering.

[49]  Robert E Guldberg,et al.  Effects of medium perfusion rate on cell-seeded three-dimensional bone constructs in vitro. , 2003, Tissue engineering.

[50]  John P Fisher,et al.  Challenges associated with regeneration of orbital floor bone. , 2010, Tissue engineering. Part B, Reviews.

[51]  S. Chang,et al.  Cranial repair using BMP-2 gene engineered bone marrow stromal cells. , 2004, The Journal of surgical research.

[52]  Martha W. Betz,et al.  Osteogenic differentiation of bone marrow stromal cells induced by coculture with chondrocytes encapsulated in three-dimensional matrices. , 2009, Tissue engineering. Part A.

[53]  Theo H Smit,et al.  Dynamic shear stress in parallel-plate flow chambers. , 2005, Journal of biomechanics.

[54]  Jan Feijen,et al.  Biological characterisation of vascular grafts cultured in a bioreactor. , 2006, Biomaterials.

[55]  R. Bareille,et al.  Responsiveness of human bone marrow stromal cells to shear stress , 2009, Journal of tissue engineering and regenerative medicine.

[56]  David J Mooney,et al.  Alginate hydrogels as biomaterials. , 2006, Macromolecular bioscience.

[57]  David Dean,et al.  Stereolithographic bone scaffold design parameters: osteogenic differentiation and signal expression. , 2010, Tissue engineering. Part B, Reviews.

[58]  T. Arnett,et al.  Hypoxia inhibits the growth, differentiation and bone-forming capacity of rat osteoblasts. , 2006, Experimental cell research.

[59]  John P Fisher,et al.  Cyclic acetal hydrogel system for bone marrow stromal cell encapsulation and osteodifferentiation. , 2008, Journal of biomedical materials research. Part A.

[60]  J. Leong,et al.  Osteogenic behavior of alginate encapsulated bone marrow stromal cells: An in vitro study , 2008, Journal of materials science. Materials in medicine.

[61]  Antonios G Mikos,et al.  Flow perfusion culture induces the osteoblastic differentiation of marrow stroma cell-scaffold constructs in the absence of dexamethasone. , 2005, Journal of biomedical materials research. Part A.

[62]  Diego Mantovani,et al.  Bioreactors for tissue engineering: focus on mechanical constraints. A comparative review. , 2006, Tissue engineering.

[63]  A. Goldstein,et al.  Fluid flow stimulates expression of osteopontin and bone sialoprotein by bone marrow stromal cells in a temporally dependent manner. , 2005, Bone.

[64]  S. Bhatia,et al.  Formation of steady-state oxygen gradients in vitro: application to liver zonation. , 2003, Biotechnology and bioengineering.

[65]  John P Fisher,et al.  Cyclic acetal hydroxyapatite nanocomposites for orbital bone regeneration. , 2010, Tissue engineering. Part A.

[66]  Robert E Guldberg,et al.  Noninvasive image analysis of 3D construct mineralization in a perfusion bioreactor. , 2007, Biomaterials.

[67]  C. Ungari,et al.  Orbital Floor Restoration , 2005, The Journal of craniofacial surgery.