On-line SPC with consideration of learning curve

This work identifies a link between on-line statistical process control (SPC) and the learning effect for the process standard deviation (PSD) caused by the quality improvement (QI) program. The learning curve (LC) is used to describe and forecast, and the exponentially weighted root mean square control chart is used to monitor the progress in reducing PSD. A modification of the quality control chart (QCC) that considers LC of PSD is proposed. The reduction rate of PSD may be large during the initial stage of the QI program, and influences QCC construction. Simulation is used to compare the shift-detecting ability of the Shewhart-X@? control chart and EWMA-X@? control chart, without- and with- consideration of LC. The EWMA-X@? chart with consideration of LC performs best. In comparison, the Shewhart-X@? chart without LC consideration has almost no shift-detecting ability when the shift magnitude of the process mean is small, leading to rendering quality control ineffective.

[1]  Louis E. Yelle.  THE LEARNING CURVE: HISTORICAL REVIEW AND COMPREHENSIVE SURVEY , 1979 .

[2]  Gerald J. Hahn,et al.  THE EVOLUTION OF SIX SIGMA , 2000 .

[3]  Charles S. Tapiero,et al.  Production Learning and Quality Control , 1987 .

[4]  James M. Lucas,et al.  Average Run Lengths for Exponentially Weighted Moving Average Control Schemes Using the Markov Chain Approach , 1990 .

[5]  Mohamad Y. Jaber,et al.  Lot sizing for an imperfect production process with quality corrective interruptions and improvements, and reduction in setups , 2006, Comput. Ind. Eng..

[6]  Charles H. Fine.  Quality Improvement and Learning in Productive Systems , 1986 .

[7]  Fiorenzo Franceschini,et al.  Learning curves and p-charts for a preliminary estimation of asymptotic performances of a manufacturing process , 2002 .

[8]  Herbert Moskowitz,et al.  Investing in Quality Under Autonomous and Induced Learning , 2003 .

[9]  J. Macgregor,et al.  The exponentially weighted moving variance , 1993 .

[10]  R. Kass.  Nonlinear Regression Analysis and its Applications , 1990 .

[11]  Roger Hoerl,et al.  SIX SIGMA AND THE FUTURE OF THE QUALITY PROFESSION , 1998 .

[12]  Mohamad Y. Jaber,et al.  Production , Manufacturing and Logistics Learning curves for processes generating defects requiring reworks , 2004 .

[13]  Rakesh Nagi,et al.  Economics of Managerial Neglect in Supply Chain Delivery Performance , 2006 .

[14]  Luk N. Van Wassenhove,et al.  Behind the Learning Curve: Linking Learning Activities to Waste Reduction , 2000 .

[15]  Maurice Bonney,et al.  Lot sizing with learning and forgetting in set-ups and in product quality , 2003 .

[16]  Fred Spiring,et al.  Introduction to Statistical Quality Control , 2007, Technometrics.

[17]  Moutaz Khouja.  The use of minor setups within production cycles to improve product quality and yield , 2005, Int. Trans. Oper. Res..

[18]  Mohamad Y. Jaber,et al.  Learning curves for imperfect production processes with reworks and process restoration interruptions , 2008, Eur. J. Oper. Res..

[19]  W. Zangwill,et al.  Toward a Theory of Continuous Improvement and the Learning Curve , 1998 .

[20]  Christopher Ittner,et al.  An Empirical Examination of Dynamic Quality-Based Learning Models , 2001, Manag. Sci..