论文信息 - Multi-objective optimization based tuning tool for industrial 2doF PID controllers

Multi-objective optimization based tuning tool for industrial 2doF PID controllers

Abstract A computer-aided control system design tool is presented. This tool is able to take advantage of a database of Pareto optimal PID controllers. The idea is to give to the control engineer an useful tool to close the gap between the optimization procedure and the final selection of the parameters. The input to the tool are the allowed degradation of the considered cost functions, the desired level of robustness and the information of the plant, in the form of second order plus time delay model or a set of input-output data. The tool is written as a graphical user interface in MATLAB© and freely available to anyone.

Ramon Vilanova | José David Rojas | Carlos Gamboa | O. Arrieta

[1] S. P. Bhattacharyya,et al. Computer aided control system design: Multiple design objectives , 2007, 2007 European Control Conference (ECC).

[2] J. V. Salcedo,et al. A new perspective on multiobjective optimization by enhanced normalized normal constraint method , 2008 .

[3] A. Messac,et al. The normalized normal constraint method for generating the Pareto frontier , 2003 .

[4] Jasbir S. Arora,et al. Survey of multi-objective optimization methods for engineering , 2004 .

[5] Monica Contreras Leiva,et al. New Tuning Method for PI Controllers based on Pareto-Optimal Criterion with Robustness Constraint , 2015, IEEE Latin America Transactions.

[6] F. G. Shinskey,et al. Process Control: As Taught vs as Practiced , 2002 .

[7] Xavier Blasco Ferragud,et al. Controller Tuning by Means of Multi-Objective Optimization Algorithms: A Global Tuning Framework , 2013, IEEE Transactions on Control Systems Technology.

[8] Guillermo L. Calandrini,et al. Early Introduction of Robust Control Concepts: Hands-On Experience and CAD , 2016, IEEE Revista Iberoamericana de Tecnologias del Aprendizaje.