Performance of NbN superconductive tunnel junctions as SIS mixers at 205 GHz

Small area (<or=1- mu m/sup 2/), high-current-density NbN-MgO-NbN tunnel junctions with I-V characteristics suitable for high-frequency mixers have been fabricated. Mesa-geometry junctions with an area of about 1 mu m/sup 2/ and critical current density of 5-10 kA/cm/sup 2/ are integrated with superconducting microstrip lines designed to resonate out the junction capacitance. Accurate values of junction capacitance and magnetic penetration depth are required for the proper design of the microstrip. A study was made of the mixer gain and noise performance near 205 GHz as a function of the inductance provided by the microstrip line. This has confirmed, at a high millimeter-wave frequency, values of junction capacitance of 85 fF/ mu m/sup 2/ and recently measured values of a magnetic penetration depth of 380 nm. Mixer noise temperatures as low as 134 K at 1.5 K have been obtained for properly tuned junctions. A significant improvement in mixer performance on cooling from 4.2 K to 1.5 K was observed. Edge-geometry junctions with an area of 0.3 mu m/sup 3/ and critical current density of 18-25 kA/cm/sup 2/ have also been fabricated. These junctions give a mixer noise temperature of 145 K at 4.2 K without the use of integrated tuning elements. These are the best results ever achieved for NbN-based SIS mixers.

[1]  Richard L. Kautz,et al.  Picosecond pulses on superconducting striplines , 1978 .

[2]  Masahiro Aoyagi,et al.  Niobium nitride Josephson tunnel junctions with magnesium oxide barriers , 1985 .

[3]  Antti V. Räisänen,et al.  Broad-Band RF Match to a Millimeter-Wave SIS Quasi-Particle Mixer , 1985 .

[4]  Marc J. Feldman,et al.  Quantum detection at millimeter wavelengths , 1985 .

[5]  Antti V. Räisänen,et al.  Variable-temperature loads for use in accurate noise measurements of cryogenically-cooled microwave amplifiers and mixers , 1986 .

[6]  B. N. Ellison,et al.  A low noise 230 GHz sis receiver , 1987 .

[7]  M. Feldman.  Theoretical considerations for THz SIS mixers , 1987 .

[8]  P. Richards,et al.  Accurate experimental and theoretical comparisons between superconductor-insulator-superconductor mixers showing weak and strong quantum effects , 1988 .

[9]  B. D. Hunt,et al.  NbN/MgO/NbN edge‐geometry tunnel junctions , 1989 .

[10]  S. R. Cypher,et al.  NbN/MgO/NbN SIS tunnel junctions for submm wave mixers , 1989 .

[11]  R. Miller,et al.  A 345GHz SIS receiver for radio astronomy , 1989 .

[12]  H. H. S. Javadi.  Performance of SIS mixers at 205 Ghz employing submicron Nb and NbN tunnel junctions , 1990, International Conference on Infrared and Millimeter Waves.

[13]  Anthony R. Kerr,et al.  Some recent developments in the design of SIS mixers , 1990 .

[14]  Brian D. Hunt,et al.  Submicron area NbN/MgO/NbN tunnel junctions for SIS mixer applications , 1991 .