Finite element linear and nonlinear, static and dynamic analysis of structural elements, an addendum

This paper gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view. The bibliography at the end of the paper contains more than 1330 references to papers, conference proceedings and theses/dissertations dealing with the analysis of beams, columns, rods, bars, cables, discs, blades, shafts, membranes, plates and shells that were published in 1999–2002.

[1]  Kuo Mo Hsiao,et al.  A co-rotational finite element formulation for buckling and postbuckling analyses of spatial beams , 2000 .

[2]  C. Carstensen,et al.  Adaptive Mixed Finite Element Method for Reissner-Mindlin Plates , 2000 .

[3]  Gangan Prathap,et al.  Eight-node field-consistent hexahedron element in dynamic problems , 1999 .

[4]  A. A. Renshaw.  Increasing the Natural Frequencies of Circular Disks Using Internal Channels , 2000 .

[5]  Gangan Prathap,et al.  Error Analysis of Timoshenko Beam Finite Element Dynamic Models , 2001, Int. J. Comput. Eng. Sci..

[6]  Helmut Saal,et al.  Buckling loads of tank shells with imperfections , 2002 .

[7]  S. T. Wasti,et al.  Finite element analysis of Laminated beams under transverse loading , 2000 .

[8]  The quintic finite element and finite strip with generalized degrees of freedom in structural analysis , 2001 .

[9]  T. X. Wu,et al.  Analysis of lateral vibration behavior of railway track at high frequencies using a continuously supported multiple beam model , 1999 .

[10]  Naveen Rastogi.  THREE-DIMENSION 'AL ANALYSIS OF COMPOSITE STRUCTURES USING VARYABLE-ORDER SOLID ELEMENTS , 1999 .

[11]  D. Hodges,et al.  Validation of the Variational Asymptotic Beam Sectional Analysis , 2002 .

[12]  P. Dadras.  Plane strain elastic–plastic bending of a strain-hardening curved beam , 2001 .

[13]  Pedro Ribeiro,et al.  Nonlinear vibration of plates by the hierarchical finite element and continuation methods , 1997 .

[14]  Giovanni Garcea,et al.  Mixed formulation in Koiter analysis of thin-walled beams , 2001 .

[15]  FINITE ELEMENT DYNAMIC MODEL UPDATING USING MODAL THERMOELASTIC FIELDS , 1998 .

[16]  Roman Lackner,et al.  Adaptive FE Analysis of RC Shells. I: Theory , 2001 .

[17]  B. Yan,et al.  Bending analysis of micropolar elastic beam using a 3-D finite element method , 2000 .

[18]  A. Selmane,et al.  NATURAL FREQUENCIES OF TRANSVERSE VIBRATIONS OF NON-UNIFORM CIRCULAR AND ANNULAR PLATES , 1999 .

[19]  Barna A. Szabó,et al.  Hierarchic models for laminated plates and shells , 1999 .

[20]  Carlos A. Mota Soares,et al.  A finite element semi-analytical model for laminated axisymmetric shells: statics, dynamics and buckling , 2000 .

[21]  Ferdinando Auricchio,et al.  Analysis of kinematic linked interpolation methods for Reissner-Mindlin plate problems , 1999 .

[22]  Majid Barghian,et al.  Snap-through behaviour of cables in flexible structures , 2000 .

[23]  W. Hwang,et al.  Estimation of normal mode and other system parameters of composite laminated plates , 2001 .

[24]  Analysis of a curved beam on uncertain elastic foundation , 2000 .

[25]  P Nemeth Michael,et al.  Effective Widths of Compression-Loaded Plates With a Cutout , 2000 .

[26]  Qiusheng Li,et al.  Buckling of multi-step non-uniform beams with elastically restrained boundary conditions , 2001 .

[27]  Chuh Mei,et al.  THERMAL POSTBUCKLING OF COMPOSITE PLATES USING THE FINITE ELEMENT MODAL COORDINATE METHOD , 1999 .

[28]  M. K. Singha,et al.  Thermal postbuckling analysis of laminated composite plates , 2001 .

[29]  Bogdan I. Epureanu,et al.  Study of warping torsion of thin-walled beams with open cross-section using macro-elements , 1999 .

[30]  M. Mofid,et al.  On the response of beams with internal hinges, under moving mass , 2000 .

[31]  C. P. Vendhan,et al.  Experimental and Numerical Investigations on Deformation of Cylindrical Shell Panels to Underwater Explosion , 2001 .

[32]  Jan Knippers,et al.  Stability of grid shells , 2001 .

[33]  Cen Song,et al.  Development of eight-node quadrilateral membrane elements using the area coordinates method , 2000 .

[34]  K. Y. Sze,et al.  A hybrid stress ANS solid-shell element and its generalization for smart structure modelling. Part II?smart structure modelling , 2000 .

[36]  Sergio Pellegrino,et al.  BI-STABLE COMPOSITE SHELLS , 2000 .

[37]  Primary to secondary buckling transition and stability of composite plates using a higher order theory , 2001 .

[38]  Romil Tanov,et al.  Numerical Simulation of Cylindrical Laminated Shells Under Impulsive Lateral Pressure , 1999 .

[39]  Dominique Chapelle,et al.  Locking-free mixed stabilized finite element methods for bending-dominated shells , 1999 .

[40]  Werner Wagner,et al.  Finite element analysis of Saint–Venant torsion problem with exact integration of the elastic–plastic constitutive equations , 2001 .

[41]  D. Chapelle,et al.  Stabilized Finite Element Formulations for Shells in a Bending Dominated State , 1998 .

[42]  Reaz A. Chaudhuri,et al.  Effect of thickness on the large elastic deformation behavior of laminated shells , 1999 .

[43]  Ralf Peek,et al.  Postbuckling analysis and imperfection sensitivity of general shells by the finite element method , 1999 .

[44]  W. Kanok-Nukulchai,et al.  Simple degenerate formulation for large displacement analysis of beams , 1999 .

[45]  R. E. Rossi,et al.  Transverse vibrations of an orthotropic rectangular plate of linearly varying thickness and with a free edge , 2000 .

[46]  Shaker A. Meguid,et al.  Finite element analysis of fir-tree region in turbine discs , 2000 .

[47]  Alan G. Davenport,et al.  Nonlinear dynamic behaviour of guy cables in turbulent winds , 2001 .

[48]  S. Oskooei,et al.  Higher-Order Finite Element for Sandwich Plates , 2000 .

[49]  Siu-Lai Chan,et al.  Stability analysis and parametric study of pre-stressed stayed columns , 2002 .

[50]  Abdul Hamid Sheikh,et al.  A high precision shear deformable element for the analysis of laminated composite plates of different shapes , 2002 .

[51]  Amde M. Amde,et al.  Nonlinear buckling and postbuckling of cable-stiffened prestressed domes , 2000 .

[52]  Alexander G Iosilevich,et al.  An inf-sup test for shell finite elements , 2000 .

[53]  Comportement en flexion de poutres en béton de hautes performances munies d’armatures de hautes performances-Étude expérimentale et numérique , 1999 .

[54]  Atef F. Saleeb,et al.  Mixed Finite Element Modeling for the Dynamics of Beam Assemblages Undergoing Large Overall Motions in Space , 2001, Int. J. Comput. Eng. Sci..

[55]  Hany W. George.  Influence of Deck Material on Response of Cable-Stayed Bridges to Live Loads , 1999 .

[56]  I. Y. Shen,et al.  Development of Isoparametric, Degenerate Constrained Layer Element for Plate and Shell Structures , 2001 .

[57]  R. E. Rossi,et al.  Comments on Coupled Flexural-Torsional Vibrations of Timoshenko Beams , 1999 .

[58]  Milos Kojic,et al.  A general beam finite element with deformable cross-section , 2001 .

[60]  Grant P. Steven,et al.  Lateral Buckling Behavior of Pneumatically Stiffened, Reinforced Composite Beams in Bending , 2001 .

[61]  G. Coffignal,et al.  Error through the constitutive relation for beam and C0 plate finite elements: static and vibration analyses , 1999 .

[62]  A. D. Nurse.  New superelements for singular derivative problems of arbitrary order , 2001 .

[63]  G. A. Mohr.  Finite element solutions for optimal triangular plates , 1999 .

[64]  A. S. Pouzada,et al.  The use of a three-point support flexural test to predict the stiffness of anisotropic composite plates in bending , 2002 .

[65]  Sung W. Lee,et al.  An assumed strain triangular solid shell element with bubble function displacements for analysis of plates and shells , 2001 .

[66]  N. Ioakimidis.  Finite differences/elements in classical beam problems: derivation of feasibility conditions under parametric inequality constraints with the help of Reduce and REDLOG , 2001 .

[67]  R. P. Shimpi,et al.  Zeroth-Order Shear Deformation Theory for Plates , 1999 .

[68]  P. Raveendranath,et al.  An accurate four-node shear flexible composite plate element , 2000 .

[69]  Chang-Koon Choi,et al.  Quadratic NMS Mindlin‐plate‐bending element , 1999 .

[70]  M. Ganapathi,et al.  FREE VIBRATION ANALYSIS OF MULTI-LAYERED COMPOSITE LAMINATES BASED ON AN ACCURATE HIGHER-ORDER THEORY , 2001 .

[71]  M. Asadzadeh.  A POSTERIORI ERROR ESTIMATES FOR THE FOKKER–PLANCK AND FERMI PENCIL BEAM EQUATIONS , 2000 .

[72]  G. Dhatt,et al.  Study of shell like structures by brick FEM , 2001 .

[73]  G. V. Rao,et al.  Free vibration of longitudinally stiffened curved panels with cutout , 1999 .

[74]  Ai Kah Soh,et al.  A high precision element with a central circular hole , 1999 .

[75]  Alain Combescure,et al.  The influence of circumferential thickness variations on the buckling of cylindrical shells under external pressure , 2000 .

[76]  M. Veljković,et al.  Steel plated structures , 2001 .

[77]  Marios K. Chryssanthopoulos,et al.  Buckling Design of Stringer-Stiffened Conical Shells in Compression , 1999 .

[78]  F. Huang,et al.  Analysis of Poisson’s ratio for a micropolar elastic rectangular plate using the finite element method , 2001 .

[79]  Jong-Shyong Wu,et al.  Free vibration analysis of a Timoshenko beam carrying multiple spring–mass systems by using the numerical assembly technique , 2001 .

[80]  J. Shepherd,et al.  The Structural Response of Cylindrical Shells to Internal Shock Loading , 1999 .

[81]  M. M. Rashid,et al.  Nonlocking Beam Finite Elements for Use with Inelastic Material Models , 1999 .

[82]  A. Mihanovic,et al.  Finite element solution improved by full clamping element functions , 2001 .

[83]  R. Özcan.  Elastic–plastic stress analysis in thermoplastic composite laminated plates under in-plane loading , 2000 .

[84]  D. Webb,et al.  Large deflection analysis of multilayer cantilever beams subjected to impulse loading , 2000 .

[85]  Humayun R.H. Kabir,et al.  Application of linear shallow shell theory of Reissner to frequency response of thin cylindrical panels with arbitrary lamination , 2002 .

[86]  Huang Kezhi,et al.  Analytical solution for cylindrical thin shells with normally intersecting nozzles due to external moments on the ends of shells , 1999 .

[87]  Antonio Tralli,et al.  A hybrid stress-assumed transition element for solid-to-beam and plate-to-beam connections , 2002 .

[88]  Superconvergence and an error estimator for the finite element analysis of beams and frames , 2001 .

[89]  Usik Lee,et al.  Spectral-Element Method for Levy-Type Plates Subject to Dynamic Loads , 1999 .

[90]  Nicholas S. Trahair,et al.  Distortion and Warping at Beam Supports , 2000 .

[91]  Mark A. Bradford,et al.  Inelastic Analysis and Behavior of Steel I-Beams Curved in Plan , 2000 .

[92]  A new class of Cn interpolations and its application to the finite element method , 2002 .

[93]  Sérgio Frascino Müller de Almeida,et al.  Natural frequencies of composite plates with tailored thermal residual-stresses , 1999 .

[94]  M. Crisfield,et al.  Rotation shape functions for a low-order quadrilateral plate element with mid-side rotations , 2001 .

[95]  Chen Ling,et al.  Improvement on the 10-node tetrahedral element for three-dimensional problems , 2000 .

[96]  Enrico Spacone,et al.  Finite element formulations of one-dimensional elements with bond-slip , 2001 .

[97]  C. Jenkins,et al.  Wrinkling of an inflated membrane with thermo-elastic boundary restraint , 2000 .

[98]  A higher-order sandwich plate theory accounting for 3-D stresses , 2000 .

[99]  Ai Kah Soh,et al.  A Mindlin plate triangular element with improved interpolation based on Timoshenko's beam theory , 1999 .

[100]  S. Yuen,et al.  Transient analysis of thin-walled structures using macro spline finite elements , 1999 .

[101]  Mohamed Elgaaly,et al.  Post-buckling behavior of thin steel plates using computational models , 2000 .

[102]  Juhani Pitkäranta,et al.  The first locking-free plane-elastic finite element: historia mathematica , 2000 .

[103]  Lihua You,et al.  Elastic-plastic stresses in a rotating solid disk , 1999 .

[104]  C. J. Dekker,et al.  Nozzles on spheres with outward weld area under internal pressure analysed by FEM and thin shell theory , 2000 .

[105]  K. Y. Sze,et al.  A hybrid stress nine-node degenerated shell element for geometric nonlinear analysis , 1999 .

[106]  R. Levy,et al.  Geometrically nonlinear three-noded flat triangular shell elements , 2001 .

[107]  Qiusheng Li.  Exact Solutions for Longitudinal Vibration of Multi-Step Bars with Varying Cross-Section , 2000 .

[108]  K. M. Liew,et al.  Comparative accuracy of DQ and HDQ methods for three-dimensional vibration analysis of rectangular plates , 1999 .

[109]  Consideration of the problem of shearing and torsion of thin-walled beams with arbitrary cross-section , 2001 .

[110]  Y. K. Cheung,et al.  A refined nonconforming plane quadrilateral element , 2000 .

[111]  P. Raveendranath,et al.  A three‐noded shear‐flexible curved beam element based on coupled displacement field interpolations , 2001 .

[112]  Djordje Vuksanović,et al.  Linear analysis of laminated composite plates using single layer higher-order discrete models , 2000 .

[113]  Federico M. Mazzolani,et al.  Cross-Sectional Classification for Aluminum Beams—Parametric Study , 2001 .

[114]  C. V. Girija Vallabhan,et al.  CONSISTENT FEM-VLASOV MODEL FOR PLATES ON LAYERED SOIL. TECHNICAL NOTE , 1999 .

[115]  A study of the effect of spatial variation of load in the pressure bar , 2000 .

[116]  A. El-Zafrany,et al.  A high-order shear element for nonlinear vibration analysis of composite layered plates and shells , 1999 .

[117]  Alexander G Iosilevich,et al.  An evaluation of the MITC shell elements , 2000 .

[118]  Jan Mandel,et al.  On the convergence of a dual-primal substructuring method , 2000, Numerische Mathematik.

[119]  Raimundo Delgado,et al.  Dynamic Tests on Large Cable-Stayed Bridge , 2001 .

[120]  D. Sulsky,et al.  THE MATERIAL POINT METHOD FOR SIMULATION OF THIN MEMBRANES , 1999 .

[121]  E. Sacco,et al.  MITC finite elements for laminated composite plates , 2001 .

[122]  Bifurcation, Limit-Point Buckling, and Dynamic Collapse of Transversely Loaded Composite Shells , 2000 .

[123]  Miran Saje,et al.  On the local stability condition in the planar beam finite element , 2001 .

[124]  S. A. Alghamdi,et al.  Dynamic stiffness matrix and load functions of Timoshenko beam using the transport matrix , 2001 .

[125]  Werner Wagner,et al.  Shear stresses in prismatic beams with arbitrary cross‐sections , 1999 .

[126]  Forced stationary vibrations of flexible plates induced by random narrow-band excitations , 2000 .

[127]  Uniform boundary stabilization of nonlinear spherical shells by using two controls only: analysis and numerical computations , 2000 .

[128]  Mehmet Utku,et al.  Circular plates on elastic foundations modelled with annular plates , 2000 .

[129]  DENSITY OF ENERGY OF A PERIODICALLY UNSTUCK ELASTIC BEAM , 2000 .

[130]  Erdogan Madenci,et al.  Analysis of thick sandwich construction by a {3,2}-order theory , 2001 .

[131]  M. Crisfield,et al.  Objectivity of strain measures in the geometrically exact three-dimensional beam theory and its finite-element implementation , 1999, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[132]  L. Vu-Quoc,et al.  Geometrically exact sandwich shells: The dynamic case , 2000 .

[133]  M. Aufaure.  A three-node cable element ensuring the continuity of the horizontal tension; a clamp–cable element , 2000 .

[134]  Ryszard Buczkowski,et al.  Finite element modelling of thick plates on two‐parameter elastic foundation , 2001 .

[135]  Dai Gil Lee,et al.  Design of carbon fiber composite shafts for high speed air spindles , 2002 .

[136]  Albert K. H. Kwan,et al.  Modeling dowel action of reinforcement bars for finite element analysis of concrete structures , 2001 .

[137]  M. Cho,et al.  General tensor-based Naghdi's shell element with NURBS surface representation , 2001 .

[138]  Ayech Benjeddou,et al.  Vibrations of complex shells of revolution using B-spline finite elements , 2000 .

[139]  Jianzhong Li,et al.  Numerical analysis of dynamic behavior of stream turbine blade group , 2000 .

[140]  E. Ramm,et al.  On the physical significance of higher order kinematic and static variables in a three-dimensional shell formulation , 2000 .

[141]  In-Won Lee,et al.  NATURAL FREQUENCY AND MODE SHAPE SENSITIVITIES OF DAMPED SYSTEMS: PART II, MULTIPLE NATURAL FREQUENCIES , 1999 .

[142]  Luke A. Louca,et al.  Experimental and numerical studies on the response of stiffened plates subjected to gas explosions , 1999 .

[143]  Sung W. Lee,et al.  An assumed strain triangular curved solid shell element formulation for analysis of plates and shells undergoing finite rotations , 2001 .

[144]  L. Damkilde,et al.  Limit state analysis of reinforced concrete plates subjected to in-plane forces , 2000 .

[146]  Srinivasan Sridharan,et al.  Stiffened plates and cylindrical shells under interactive buckling , 2001 .

[147]  Peretz P. Friedmann,et al.  An aeroelastic model for composite rotor blades with straight and swept tips. Part I: Aeroelastic stability in hover , 2002 .

[148]  Tarun Kant,et al.  Thermal buckling analysis of skew fibre-reinforced composite and sandwich plates using shear deformable finite element models , 2000 .

[149]  Ahmed K. Noor,et al.  Geometrically nonlinear analysis of layerwise anisotropic shell structures by hybrid strain based lower order elements , 1987 .

[150]  Ricardo G. Durán,et al.  Error estimates for 3-d narrow finite elements , 1999, Math. Comput..

[151]  Carlos A. Felippa,et al.  Construction of optimal 3-node plate bending triangles by templates , 1999 .

[152]  Erik Serrano,et al.  Numerical investigations of the laminating effect in laminated beams , 1999 .

[153]  Amde M. Amde,et al.  An algorithm for nonlinear stability analysis of an expandable self-erecting structure , 2001 .

[154]  Pao-Hsii Wang,et al.  Study on nonlinear analysis of a highly redundant cable-stayed bridge , 2002 .

[155]  A. V. Krishna Murty,et al.  A high precision coupled bending–extension triangular finite element for laminated plates , 1999 .

[156]  Farhan Gandhi,et al.  Influence of Nonlinear Viscoelastic Material Characterization on Performance of Constrained Layer Damping Treatment , 2001 .

[157]  Aouni A. Lakis,et al.  INVESTIGATION OF THE STABILITY AND STEADY STATE RESPONSE OF ASYMMETRIC ROTORS, USING FINITE ELEMENT FORMULATION , 2001 .

[158]  Yorikata Mizokami,et al.  Prediction of Macroscopic and Local Stress-Strain Behavior of Perforated Plates under Primary and Secondary Creep Conditions , 2001 .

[159]  H. Ding,et al.  Free Axisymmetric Vibration of Laminated Transversely Isotropic Annular Plates , 2000 .

[160]  R. Adams,et al.  Vibration Properties of Structural FRP Composites. , 1999 .

[161]  Elastodynamic analysis with hybrid stress finite elements , 2001 .

[162]  B. P. Patel,et al.  Theoretical & Experimental Studies on Vibration & Damping of Fibre-Reinforced Cantilever Laminates. , 2000 .

[163]  Klaus-Jürgen Bathe,et al.  The inf–sup condition and its evaluation for mixed finite element methods , 2001 .

[164]  Carsten Carstensen,et al.  Residual-Based A Posteriori Error Estimate for a Nonconforming Reissner-Mindlin Plate Finite Element , 2001, SIAM J. Numer. Anal..

[165]  Carol Ann Featherston.  The use of finite element analysis in the examination of instability in flat plates and curved panels under compression and shear , 2000 .

[166]  R. C. Averill,et al.  A Three-Dimensional Laminated Plate Finite Element with High-Order Zig-Zag Sublaminate Approximations , 2001, Int. J. Comput. Eng. Sci..

[167]  Jacob Fish,et al.  Hierarchical assumed strain-vorticity shell element with drilling degrees of freedom , 1999 .

[168]  Ryohei Ishida.  Stochastic Finite Element Analysis of Beam with Statistical Uncertainties , 2001 .

[169]  A. Houmat,et al.  A SECTOR FOURIER p -ELEMENT APPLIED TO FREE VIBRATION ANALYSIS OF SECTORIAL PLATES , 2001 .

[170]  Zhang Xiang-ming,et al.  Locking-free degenerated isoparametric shell element , 2001 .

[171]  Kok Keng Ang,et al.  Vibration of Skew Sandwich Plates With Laminated Facings , 1997 .

[172]  A. R. Whittaker,et al.  THE NATURAL FREQUENCIES AND MODE SHAPES OF A UNIFORM CANTILEVER BEAM WITH MULTIPLE TWO-DOF SPRING–MASS SYSTEMS , 1999 .

[173]  O. Sayman,et al.  An Investigation on Buckling of Laminated Plates with Central Square Hole , 2001 .

[174]  Robert Meyers,et al.  Evaluation of a Load Test and Finite Element Analysis of Drilled Shafts in Stiff Soils , 2000 .

[175]  R. Piltner,et al.  An accurate low order plate bending element with thickness change and enhanced strains , 2001 .

[176]  In Lee,et al.  Vibration and Damping Analysis of Laminated Plates with Fully and Partially Covered Damping Layers , 2000 .

[177]  Robert L. Taylor,et al.  A mixed-enhanced formulation tetrahedral finite elements , 2000 .

[178]  Richard S. Falk,et al.  Locking-free finite elements for the Reissner-Mindlin plate , 2000, Math. Comput..

[179]  J. S. Rao,et al.  Transient response of rotating laminated plates with interfacial friction under accelerating conditions , 1999 .

[180]  Qiusheng Li,et al.  Buckling of elastically restrained non-uniform columns , 2000 .

[181]  Franz G. Rammerstorfer,et al.  Wrinkling of thick orthotropic sandwich plates under general loading conditions , 2000 .

[182]  R. E. Rossi,et al.  Out-of-plane vibrations of shear deformable continuous horizontally curved thin-walled beams , 2000 .

[183]  Jaroslav Mackerle,et al.  Finite Element Vibration Analysis of Beams, Plates and Shells , 1999 .

[184]  T. R. Tauchert,et al.  REFINED THEORY OF LAMINATED ANISOTROPIC SHELLS FOR THE SOLUTION OF THERMAL STRESS PROBLEMS , 1999 .

[185]  Abdul Hamid Sheikh,et al.  A new triangular element for the analysis of thick and thin plates , 2001 .

[186]  R. Kolonay,et al.  SENSITIVITY ANALYSIS FOR TURBINE BLADE COMPONENTS , 1998 .

[187]  L. Feo,et al.  On the statical behaviour of fibre-reinforced polymer thin-walled beams , 2000 .

[188]  Mehmet H. Omurtag,et al.  Stability Analysis of Composite-Plate Foundation Interaction by Mixed FEM , 2000 .

[189]  Vebil Yıldırım,et al.  Effect of the longitudinal to transverse moduli ratio on the in-plane natural frequencies of symmetric cross-ply laminated beams by the stiffness method , 2000 .

[190]  Tarun Kant,et al.  Large Amplitude Vibration of Polymer Composite Stiffened Laminates by the Finite Element Method , 1999 .

[191]  Gajbir Singh,et al.  A two-node curved axisymmetric shell element based on coupled displacement field , 1999 .

[192]  Michael D. Kotsovos,et al.  A study of dowel action in reinforced concrete beams , 1999 .

[193]  Yoshihiko Sugiyama,et al.  EXPERIMENTAL VERIFICATION OF DYNAMIC STABILITY OF VERTICAL CANTILEVERED COLUMNS SUBJECTED TO A SUB-TANGENTIAL FORCE , 2000 .

[194]  B. O. Al-Bedoor,et al.  Dynamic model of coupled shaft torsional and blade bending deformations in rotors , 1999 .

[195]  Seungchul Lim.  FINITE ELEMENT ANALYSIS OF FLEXURAL VIBRATIONS IN HARD DISK DRIVE SPINDLE SYSTEMS , 2000 .

[196]  Ekkehard Ramm,et al.  Generalized Energy–Momentum Method for non-linear adaptive shell dynamics , 1999 .

[197]  M. Çelik,et al.  Thermoplastic Matrix Plates in Elasto-Plastic Finite Element Analysis , 2001 .

[198]  Wieslaw Zaton,et al.  Friction-induced oscillations of a pin-on-disk slider: analytical and experimental studies , 1999 .

[199]  Walter Wunderlich,et al.  Analysis and load carrying behaviour of imperfection sensitive shells , 1998 .

[200]  Ronald C. Averill,et al.  First-order zig-zag sublaminate plate theory and finite element model for laminated composite and sandwich panels , 2000 .

[201]  Y. K. Cheung,et al.  Plate on cross-anisotropic foundation analyzed by the finite element method , 2001 .

[202]  Yoon Young Kim,et al.  Higher‐order hybrid‐mixed axisymmetric thick shell element for vibration analysis , 2001 .

[203]  Yl L. Xu,et al.  Fully Computerized Approach to Study Cable-Stayed BRIDGE-VEHICLE Interaction , 2001 .

[204]  Anthony N. Palazotto,et al.  Finite element formulation for cylindrical bending of a transversely compressible sandwich plate, based on assumed transverse strains , 2001 .

[205]  C. P. Vendhan,et al.  Non-linear transient dynamic response of rectangular plates under shock loading , 2000 .

[206]  Finite element approximation of solutions to a class of nonlinear hyperbolic-parabolic equations , 1999 .

[207]  Massimo Ruzzene,et al.  FINITE ELEMENT MODELLING OF MAGNETIC CONSTRAINED LAYER DAMPING , 2000 .

[208]  E. Haug,et al.  Dynamic Simulation of General Flexible Multibody Systems , 1999 .

[209]  M. Yeh,et al.  Bending buckling of an elastoplastic cylindrical shell with a cutout , 1999 .

[210]  Xuejun Xu,et al.  A V-cycle multigrid method for TRUNC plate element , 2000 .

[211]  Shoji Iwasaki,et al.  5-node hybrid/mixed finite element for Reissner-Mindlin plate , 1999 .

[212]  K. Y. Sze,et al.  A hybrid stress ANS solid‐shell element and its generalization for smart structure modelling. Part I—solid‐shell element formulation , 2000 .

[213]  Filip C. Filippou,et al.  Non-linear spatial Timoshenko beam element with curvature interpolation , 2001 .

[214]  Håkan L. Wettergren,et al.  A beam element for non-symmetric composite shafts , 2000 .

[215]  Michael R Wisnom,et al.  Heavily loaded bonded composite structure: design, manufacture and test of `I' beam specimens , 2001 .

[216]  Ferdinando Auricchio,et al.  PARTIAL SELECTIVE REDUCED INTEGRATION SCHEMES AND KINEMATICALLY LINKED INTERPOLATIONS FOR PLATE BENDING PROBLEMS , 1999 .

[217]  Y. Kim,et al.  Analysis of Thin-Walled Closed Beams With General Quadrilateral Cross Sections , 1999 .

[218]  C. M. Stone,et al.  A suitable low‐order, tetrahedral finite element for solids , 1999 .

[219]  K. Sze,et al.  On using degenerated solid shell elements in adaptive refinement analysis , 1999 .

[220]  George A. Lesieutre,et al.  A discrete layer beam finite element for the dynamic analysis of composite sandwich beams with integral damping layers , 1999 .

[221]  Yoon Young Kim,et al.  Thin‐walled closed box beam element for static and dynamic analysis , 1999 .

[222]  Marios K. Chryssanthopoulos,et al.  Elastic buckling and postbuckling behaviour of widely-stiffened conical shells under axial compression , 1999 .

[223]  Aouni A. Lakis,et al.  SEMI-ANALYTICAL SHAPE FUNCTIONS IN THE FINITE ELEMENT ANALYSIS OF RECTANGULAR PLATES , 2001 .

[224]  Hong Hee Yoo,et al.  DYNAMIC ANALYSIS OF A ROTATING CANTILEVER BEAM BY USING THE FINITE ELEMENT METHOD , 2002 .

[225]  C. Schwab,et al.  Fourier mode analysis of layers in shallow shell deformations , 2001 .

[226]  Ying-Te Lee,et al.  Axisymmetric vibration analysis of rotating annular plates by a 3D finite element , 2000 .

[227]  H. Rothert,et al.  An idealization concept for the stability analysis of ring-reinforced cylindrical shells under external pressure , 2002 .

[228]  D. Roy Mahapatra,et al.  Spectral-Element-Based Solutions for Wave Propagation Analysis of Multiply Connected Unsymmetric Laminated Composite Beams , 2000 .

[229]  A. Yapici,et al.  Elasto-Plastic Stress Analysis of Thermoplastic Matrix Composite Laminated Plates Under In-Plane Loading , 2001 .

[230]  Fumio Fujii,et al.  Static path jumping to attain postbuckling equilibria of a compressed circular cylinder , 2000 .

[231]  Soheil Mohammadi,et al.  Performance of the anisotropic Morley shell element in dynamic large deformation analysis , 1999 .

[232]  Ivar Talvik,et al.  Finite element modelling of cable networks with flexible supports , 2001 .

[233]  Ben Young,et al.  Finite element analysis and design of fixed-ended plain channel columns , 2002 .

[234]  Fawzi M. A. El-Saeidy.  Finite-element vibration analysis of a cantilever plate with a central circular hole subject to an in-plane moving (rotating) load , 2001 .

[235]  V. A. Gridchin,et al.  Calculation of deflection and mechanical stresses in plates of the rectangular form by variational and numerical methods [for pressure sensor design] , 2000, Siberian Russian Student Workshops and Tutorials on Electron Devices and Materials (Cat. No.00EX416).

[236]  Multilayer shells: Geometrically-exact formulation of equations of motion , 2000 .

[237]  Inderjit Chopra,et al.  A refined structural dynamics model for composite rotor blades , 1999 .

[238]  David I. McLean,et al.  Application of Dynamic System Identification to Timber Beams - part II , 2001 .

[239]  Peter Wriggers,et al.  Finite element modelling of orthotropic material behaviour in pneumatic membranes , 2001 .

[240]  S. W. Lee,et al.  Buckling and postbuckling of soft-core sandwich plates with composite facesheets , 2000 .

[241]  Y. K. Cheung,et al.  On the determination of natural frequencies and mode shapes of cable-stayed bridges , 2001 .

[242]  Brian Uy,et al.  Theoretical study on the post-local buckling of steel plates in concrete-filled box columns , 2000 .

[243]  Renato Natal Jorge,et al.  Development of shear locking‐free shell elements using an enhanced assumed strain formulation , 2002 .

[244]  M. Elseifi,et al.  PROBABILISTIC ANALYSIS OF THICK COMPOSITE PLATES WITH MANUFACTURING AND MATERIAL UNCERTAINTIES , 2001 .

[247]  Marta B. Rosales,et al.  Arbitrary precision frequencies of a free rectangular thin plate , 2000 .

[248]  Limin Tang,et al.  THREE-DIMENSIONAL FREE VIBRATION OF THICK LAMINATED CYLINDRICAL SHELLS WITH CLAMPED EDGES , 1999 .

[249]  Eugenio Oñate,et al.  Rotation-free triangular plate and shell elements , 2000 .

[250]  Jaehong Lee,et al.  Flexural–torsional coupled vibration of thin-walled composite beams with channel sections , 2002 .

[251]  Isaac Elishakoff,et al.  Apparently first closed-form solution for vibrating: inhomogeneous beams , 2001 .

[252]  M. D Xue,et al.  Stress analysis of cylindrical shells with nozzles due to external run pipe moments , 2000 .

[253]  G. Sekhon,et al.  Generation of exact stiffness matrix for a conical shell element , 1999 .

[254]  Hua Hongxing,et al.  Identification of plate rigidities of a circular plate with cylindrical orthotropy using vibration data , 2000 .

[255]  K. Y. Sze,et al.  A quadratic assumed natural strain curved triangular shell element , 1999 .

[256]  Inderjit Chopra,et al.  Refined Structural Model for Thin- and Thick-Walled Composite Rotor Blades , 2002 .

[257]  O. Sayman,et al.  Elastic–plastic stress analysis of simply supported and clamped aluminum metal-matrix laminated plates with a hole , 2001 .

[258]  U. Shrinivasa,et al.  A 14-node brick element, PN5X1, for plates and shells , 2000 .

[259]  Ning Hu,et al.  Two kinds of C0-type elements for buckling analysis of thin-walled curved beams , 1999 .

[260]  F. Wald,et al.  EMBEDDED STEEL COLUMN BASES-II: DESIGN MODEL PROPOSAL , 2000 .

[261]  Filip C. Filippou,et al.  Non-linear analysis of shells of revolution with ring elements , 2002 .

[262]  Yueqing Yu,et al.  A new spatial rotor beam element for modeling spatial manipulators with joint and link flexibility , 2000 .

[263]  Olivier A. Bauchau,et al.  Multibody Modeling of Engage and Disengage Operations of Helicopter Rotors , 2001 .

[264]  Lawrence A. Bergman,et al.  Three-dimensional vibration of cylindrical shell panels – solution by continuum and discrete approaches , 2000 .

[265]  F. Heyder,et al.  Zur Tragfähigkeit der Stegbleche der Dresdner Flügelwegbrücke , 1999 .

[266]  Z. Tonković,et al.  A new formulation of numerical algorithms for modelling of elastoplastic cyclic response of shell-like structures , 2000 .

[267]  Joseph E. Flaherty,et al.  Hierarchical finite element bases for triangular and tetrahedral elements , 2001 .

[268]  Yoshihiko Sugiyama,et al.  Dynamic stability of columns subjected to follower loads : A survey , 2000 .

[269]  C. R. Calladine,et al.  Buckling of thin cylindrical shells under axial compression , 2000 .

[270]  D. Allman,et al.  The 'constant' bending moment three-noded triangle , 2000 .

[271]  R. Y. Yakoub,et al.  Three Dimensional Absolute Nodal Coordinate Formulation for Beam Elements: Implementation and Applications , 2001 .

[272]  Yuan Mao Huang,et al.  The Impact of Sliding Blades in a Rotary Compressor , 2001 .

[273]  Norman F. Knight,et al.  An assessment of shell theories for buckling ofcircular cylindrical laminated composite panels loaded inaxial compression , 1999 .

[274]  Suha Oral.  A Mindlin plate finite element with semi-analytical shape design sensitivities , 2000 .

[275]  M. Richard,et al.  A Dynamic Finite Element (DFE) for coupled bending-torsional vibrations of axially loaded beams , 1999 .

[276]  Rigid square inclusion embedded within an epoxy disk: asymptotic stress analysis , 1999 .

[277]  S. K. Satsangi,et al.  Finite element buckling analysis of laminated composite stiffened shells , 2001 .

[278]  Ghazi Abu-Farsakh,et al.  Effect of material nonlinearity in unidirectional composites on the behavior of beam structures , 2000 .

[279]  T. Fujioka,et al.  A study on measuring rail/wheel contact points of running railway vehicles (improvement of the measuring method for wheel load and lateral force by strain gauges on disk surface) , 1999, Proceedings of the 1999 ASME/IEEE Joint Railroad Conference (Cat. No.99CH36340).

[280]  G. Rao,et al.  A LOCK-FREE MATERIAL FINITE ELEMENT FOR NON-LINEAR OSCILLATIONS OF LAMINATED PLATES , 2000 .

[281]  P. K. Sinha,et al.  Finite element vibration analysis of laminated composite folded plate structures , 1999 .

[282]  K. Y. Lam,et al.  VIBRATION ANALYSIS OF THIN CYLINDRICAL SHELLS USING WAVE PROPAGATION APPROACH , 2001 .

[283]  Anthony N. Palazotto,et al.  Nonlinear Dynamic Finite Element Analysis of Composite Cylindrical Shells Considering Large Rotations , 1999 .

[284]  R. Y. Yakoub,et al.  Three Dimensional Absolute Nodal Coordinate Formulation for Beam Elements: Theory , 2001 .

[285]  Hyo-Gyoung Kwak,et al.  FE Analysis of RC Beams Based on Moment-Curvature Relation , 2000 .

[286]  T. Kant,et al.  REFINED HIGHER ORDER FINITE ELEMENT MODELS FOR THERMAL BUCKLING OF LAMINATED COMPOSITE AND SANDWICH PLATES , 2000 .

[287]  Arif Masud,et al.  A stabilized 3-D co-rotational formulation for geometrically nonlinear analysis of multi-layered composite shells , 2000 .

[288]  S. Sridharan,et al.  MODELING INTERACTIVE BUCKLING OF PLATE STRUCTURES USING SPECIAL ELEMENTS , 2000 .

[289]  C. Ng,et al.  Nonlinear response of composite plates using the finite element modal reduction method , 2001 .

[290]  Marc J. Richard,et al.  Free vibrational analysis of axially loaded bending-torsion coupled beams: a dynamic finite element , 2000 .

[291]  B. Gangadhara Prusty,et al.  FINITE ELEMENT TRANSIENT DYNAMIC ANALYSIS OF LAMINATED STIFFENED SHELLS , 2001 .

[292]  E. Barkanov,et al.  Transient response analysis of structures made from viscoelastic materials , 1999 .

[293]  Huang Mojia,et al.  Updated Lagrangian polar decomposition method in non‐linear elasticity and its shell element implementation , 1999 .

[294]  K. Y. Sze,et al.  A 12‐node hybrid stress brick element for beam/column analysis , 1999 .

[295]  H. Stumpf,et al.  A shell finite element for large strain elastoplasticity with anisotropies-Part II: Constitutive equations and numerical applications , 1999 .

[296]  Albert A. Groenwold,et al.  Two hybrid stress membrane finite element families with drilling rotations , 2002 .

[297]  Rakesh K. Kapania,et al.  Static and Vibration Analyses of General Wing Structures Using Equivalent-Plate Models , 2000 .

[298]  Yiu-Wing Mai,et al.  Simulations of mechanical performance of pultruded I-beams with various flange-web conjunctions , 1999 .

[299]  J. F. Jullien,et al.  Finite Element simulation of dynamic buckling of cylinders subjected to periodic shear , 2000 .

[300]  D. Choï.  Computations on thin non-inhibited hyperbolic elastic shells. Bench-marks for membrane locking , 1999 .

[301]  Dong-Yol Yang,et al.  Elasto-plastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials , 1999 .

[302]  Rakesh K. Kapania,et al.  A survey of recent shell finite elements , 2000 .

[303]  Qiusheng Li.  An Exact Approach For Free Vibration Analysis of Multi-Step Nonuniform Shear Plates , 2002 .

[304]  A numerical analysis method for layered plate with different material constants , 2001 .

[305]  M. Ishihara.  Finite-element formulation with special orthogonal group SO (3) * (Part 3, consideration upon formulation with SO (3)) , 2000 .

[306]  Romil Tanov,et al.  A simple correction to the first-order shear deformation shell finite element formulations , 2000 .

[307]  Mark W. Hilburger,et al.  Effects of Imperfections on the Buckling Response of Compression-Loaded Composite Shells , 2000 .

[308]  Yl L. Xu,et al.  Triple-girder model for modal analysis of cable-stayed bridges with warping effect , 2000 .

[309]  Zhiqiang Cai,et al.  Least-squares finite element approximations for the Reissner-Mindlin plate , 1999 .

[310]  Carlos E. S. Cesnik,et al.  On the modeling of integrally actuated helicopter blades , 2001 .

[311]  P. Raveendranath,et al.  Free vibration of arches using a curved beam element based on a coupled polynomial displacement field , 2000 .

[312]  J. Batoz,et al.  Formulation and evaluation of incompatible but convergent rational quadrilateral membrane elements , 2000 .

[313]  J. D. Yau,et al.  A simple nonlinear triangular plate element and strategies of computation for nonlinear analysis , 1999 .

[314]  P.A.A. Laura,et al.  Numerical experiments on vibrating circular plates of rectangular orthotropy and carrying a central, concentrated mass , 1999 .

[315]  Peter Betsch,et al.  Numerical implementation of multiplicative elasto-plasticity into assumed strain elements with application to shells at large strains , 1999 .

[316]  P. Ribeiro.  Periodic Vibration of Plates with Large Displacements , 2002 .

[317]  Ronald L. Huston,et al.  Modeling of Variable Length Towed and Tethered Cable Systems , 1999 .

[318]  K. Wisniewski,et al.  Finite rotation quadrilateral element for multi‐layer beams , 1999 .

[319]  Yalçin Aköz,et al.  The mixed finite element method for the quasi‐static and dynamic analysis of viscoelastic timoshenko beams , 1999 .

[320]  Tore Tryland,et al.  Effect of Material and Geometry Variations on Beam under Patch Loading , 2001 .

[321]  Jaime Domínguez,et al.  A new numerical method for the dynamic analysis of impact loads in flexible beams , 1999 .

[322]  Fawzi M. A. El-Saeidy,et al.  Finite-Element Dynamic Analysis of a Rotating Shaft with or without Nonlinear Boundary Conditions Subject to a Moving Load , 2000 .

[323]  M. Sarıkanat,et al.  Finite-element analysis of thick composite beams and plates , 2001 .

[324]  A. L. Cavalieri.  Numerical simulation of the thermal shock of alumina disks with different surface finish , 2001 .

[325]  R. M. Grice,et al.  A method for the vibration analysis of built-up structures, Part II: Analysis of the plate-stiffened beam using a combination of finite element analysis and analytical impedances , 2000 .

[326]  Kuo Mo Hsiao,et al.  Co-rotational formulation for geometric nonlinear analysis of doubly symmetric thin-walled beams , 2001 .

[327]  Kim J.R. Rasmussen,et al.  Interaction curves for locally buckled I-section beam-columns , 2002 .

[328]  O. Sayman,et al.  Elasto-Plastic Stress Analysis of Aluminum Metal Matrix Laminated Plates with a Circular Hole under Transverse Loading , 2001 .

[329]  Wen-Jun Zhang,et al.  3D Dynamic Modelling of Spatial Geared Systems , 2001 .

[330]  Christian Miehe,et al.  Energy and momentum conserving elastodynamics of a non‐linear brick‐type mixed finite shell element , 2001 .

[331]  Gajbir Singh,et al.  A two‐noded locking–free shear flexible curved beam element , 1999 .

[332]  N. Bhutani,et al.  COMBINED FINITE ELEMENT-TRANSFER MATRIX METHOD , 1999 .

[333]  In Lee,et al.  Aeroelastic response and stability analysis of composite rotor blades in forward flight , 2001 .

[334]  Chuck A. Plaxico,et al.  Improvements to the Weak-Post W-Beam Guardrail , 2001 .

[335]  G Bezine,et al.  A new plate finite element using integral representation interpolation , 1999 .

[336]  Ian Burgess,et al.  Composite beam behaviour in braced frames , 1999 .

[337]  Alain Berry,et al.  VIBRATION OF STIFFENED PLATES USING HIERARCHICAL TRIGONOMETRIC FUNCTIONS , 2000 .

[338]  A Mixed Finite Element for Plate Bending with Eight Enhanced Strain Modes , 2001 .

[339]  Heung-Soo Kim,et al.  Numerical and analytical study on deep biaxial bending collapse of thin-walled beams , 2000 .

[340]  R. S. Gupta,et al.  FINITE ELEMENT VIBRATION ANALYSIS OF ROTATING TIMOSHENKO BEAMS , 2001 .

[341]  Z. Zhong,et al.  An accurate and efficient shell element with improved reduced integration rules , 1999 .

[342]  Jonathan E. Cooper,et al.  a Combined Modal/finite Element Analysis Technique for the Dynamic Response of a Non-Linear Beam to Harmonic Excitation , 2001 .

[343]  Mahen Mahendran,et al.  Flexural capacity of hollow flange beams , 2000 .

[344]  Bjørn Skallerud,et al.  Collapse of thin shell structures—stress resultant plasticity modelling within a co-rotated ANDES finite element formulation , 1999 .

[345]  M. Touratier,et al.  Shear flexible curved spline beam element for static analysis , 1999 .

[346]  Georgios Savaidis,et al.  FE fatigue analysis of notched elastic–plastic shaft under multiaxial loading consisting of constant and cyclic components , 2001 .

[347]  Shaker A. Meguid,et al.  Three-dimensional finite element analysis of saddle supported pressure vessels , 2001 .

[348]  Yi Zheng,et al.  DUCTILITY OF THIN-WALLED STEEL BOX STUB-COLUMNS , 2000 .

[349]  N. Chandrasekaran,et al.  A nonlinear higher order shear deformation shell element for dynamic explicit analysis: part II. performance validation through standard tests , 1987 .

[350]  Y. Başar,et al.  Application of transversely isotropic materials to multi-layer shell elements undergoing finite rotations and large strains , 2001 .

[351]  Farid Taheri,et al.  Dynamic elastic buckling of a slender beam with geometric imperfections subject to an axial impulse , 2000 .

[352]  Rolands Rikards,et al.  Analysis for buckling and vibrations of composite stiffened shells and plates , 2001 .

[353]  P. Subramanian,et al.  Finite element analysis of thick homogeneous plates , 1999 .

[354]  K. Ding,et al.  Three-dimensional thermoelastic solution for laminated cantilever cylindrical shell , 2001 .

[355]  P. Wriggers,et al.  An energy–momentum integration scheme and enhanced strain finite elements for the non-linear dynamics of shells , 2002 .

[356]  Oubay Hassan,et al.  An averaged nodal deformation gradient linear tetrahedral element for large strain explicit dynamic applications , 2001 .

[357]  P. Niederer,et al.  Total hourglass control for hyperelastic materials , 2000 .

[358]  Jaehong Lee,et al.  Flexural–torsional buckling of thin-walled I-section composites , 2001 .

[359]  A. K. Jemah,et al.  Exact out-of-plane natural frequencies of curved Timoshenko beams , 1999 .

[360]  M. V. Shambira,et al.  Numerical simulation of shrinkage and creep in patch-repaired axially loaded reinforced concrete short columns , 2001 .

[361]  Dieter Weichert,et al.  Shock wave-loaded plates , 2001 .

[362]  Olivier Polit,et al.  Flexural loss factors of sandwich and laminated composite beams using linear and nonlinear dynamic analysis , 1999 .

[363]  Domenico Bruno,et al.  Nonlinear structural models in cableway transport systems , 1999, Simul. Pract. Theory.

[364]  E. Carrera.  Developments, ideas, and evaluations based upon Reissner’s Mixed Variational Theorem in the modeling of multilayered plates and shells , 2001 .

[365]  M. R. Eslami,et al.  Elasticity solution and free vibrations analysis of laminated anisotropic cylindrical shells , 1999 .

[366]  Richard E. Ewing,et al.  A mixed least-squares method for an inverse problem of a nonlinear beam equation , 1999 .

[367]  Noureddine Atalla,et al.  Validation, performance, convergence and application of free interface component mode synthesis , 2001 .

[368]  Anders Eriksson,et al.  Extension of field consistence approach into developing plane stress elements , 1999 .

[369]  C. Farhat,et al.  A Scalable Substructuring Method By Lagrange Multipliers For Plate Bending Problems , 1996 .

[370]  J. B. Ligon,et al.  Design of edge inserts for composite sandwich beams , 2001 .

[371]  Luís M. S. S. Castro,et al.  Wavelets in hybrid-mixed stress elements , 2001 .

[372]  Dominique Chapelle,et al.  The mathematical shell model underlying general shell elements , 2000 .

[373]  M. Crisfield,et al.  A large‐strain elasto–plastic shell formulation using the Morley triangle , 2001 .

[374]  M. Ortiz,et al.  Subdivision surfaces: a new paradigm for thin‐shell finite‐element analysis , 2000 .

[375]  B. D. Reddy,et al.  The equivalent parallelogram and parallelepiped, and their application to stabilized finite elements in two and three dimensions , 2001 .

[376]  Hiroshi Noguchi,et al.  A refined model for beam elements and beam–column joints , 2000 .

[377]  M. Dauge,et al.  Higher‐order responses of three‐dimensional elastic plate structures and their numerical illustration by p‐FEM , 2002 .

[378]  H. Xue,et al.  Numerical and Experimental Studies of Multiple Discs in Contact , 2001, Int. J. Comput. Eng. Sci..

[379]  M. Cho,et al.  Buckling analysis of grid-stiffened composite plates using hybrid element with drilling D.O.F , 1999 .

[380]  Gennady M. Kulikov,et al.  Simple and effective elements based upon Timoshenko–Mindlin shell theory , 2002 .

[381]  B. P. Patel,et al.  Analysis of parametrically excited laminated composite joined conical–cylindrical shells , 2001 .

[382]  Joseph C. S. Lai,et al.  Modelling the Vibration Behaviour of Infinite Structures by FEM , 2000 .

[383]  Ai Kah Soh,et al.  An improved discrete Kirchhoff triangular element for bending, vibration and buckling analyses , 2000 .

[384]  R. Richter.  Stabschnittgrößen aus FE‐Schalenmodellen , 2001 .

[385]  Armen Der Kiureghian,et al.  Space-variant finite element reliability analysis , 1999 .

[386]  Sritawat Kitipornchai,et al.  EFFECTS OF SUBTENDED AND VERTEX ANGLES ON THE FREE VIBRATION OF OPEN CONICAL SHELL PANELS: A CONICAL CO-ORDINATE APPROACH , 1999 .

[387]  A. Der Kiureghian,et al.  Seismic Interaction in Cable-Connected Equipment Items , 2001 .

[388]  Pedro Ribeiro,et al.  HIERARCHICAL FINITE ELEMENT ANALYSES OF GEOMETRICALLY NON-LINEAR VIBRATION OF BEAMS AND PLANE FRAMES , 2001 .

[389]  Anthony N. Palazotto,et al.  A higher-order sandwich plate theory accounting for 3-D stresses , 2000 .

[390]  D. J. Dawe,et al.  Nonlinear transient analysis of rectangular composite laminated plates , 2000 .

[391]  Suzanne Weaver Smith,et al.  Explicit dynamics finite element analysis for parametrically excited motion of a cantilevered beam , 2000 .

[392]  Young-Seok Kang,et al.  VIBRATION ANALYSIS OF ARBITRARILY SHAPED MEMBRANES USING NON-DIMENSIONAL DYNAMIC INFLUENCE FUNCTION , 1999 .

[393]  Michael C.H. Yam,et al.  Design for Lateral Torsional Buckling of Coped I-beams , 2000 .

[394]  M. Karama,et al.  Experimental and numerical simulations of the static behaviour of orthotropic plates , 2001 .

[395]  N. E. Shanmugam,et al.  Nonlinear analysis of steel-concrete composite beams curved in plan , 1999 .

[396]  A. Soh,et al.  Alternative Approach to Modify a Discrete Kirchhoff Triangular Element , 2001 .

[397]  J. Durodola,et al.  Deformation and stresses in functionally graded rotating disks , 2000 .

[398]  Marios K. Chryssanthopoulos,et al.  Validation of FE models for buckling analysis of woven GFRP shells , 2000 .

[399]  Jong Hoon Kim,et al.  An assumed strain formulation of efficient solid triangular element for general shell analysis , 2000 .

[400]  Paul M. Weaver,et al.  Anisotropic effects in the compression buckling of laminated composite cylindrical shells , 2002 .

[401]  Dewey H. Hodges,et al.  Performance Enhancement of a Composite Tilt-Rotor Using Aeroelastic Tailoring , 2000 .

[402]  Anders Eriksson,et al.  An alternative assumed strain method , 1999 .

[403]  S. M. Choo,et al.  Finite element Galerkin solutions for the nonplanar oscillatory beam equations , 2000, Appl. Math. Comput..

[404]  Song Cen,et al.  A new nine DOF triangular element for analysis of thick and thin plates , 1999 .

[405]  Time-Discontinuous Stabilized Space-Time Finite Elements for Timoshenko Beams , 2001 .

[406]  M Herdi,et al.  A parametric stability analysis of composite plates tapered in planform , 2000 .

[407]  K. Y. Sze,et al.  Hybrid‐stress solid elements for shell structures based upon a modified variational functional , 2002 .

[408]  M. G. Sainsbury,et al.  The Galerkin element method applied to the vibration of rectangular damped sandwich plates , 2000 .

[409]  Alexander E. Bogdanovich,et al.  Three-dimensional variational theory of laminated composite plates and its implementation with Bernstein basis functions , 2000 .

[410]  Clark R. Dohrmann,et al.  A transition element for uniform strain hexahedral and tetrahedral finite elements , 1999 .

[411]  C. W. S. To,et al.  Hybrid strain based geometrically nonlinear laminated composite triangular shell finite elements , 1999 .

[412]  C C Menzemer,et al.  ALUMINUM GUSSET PLATES IN TENSION , 1999 .

[413]  A. Galip Ulsoy,et al.  Dynamics of prestressed rotating anisotropic plates subject to transverse loads and heat sources, part II : Application to a specially orthotropic disk , 2000 .

[414]  Peter Avitabile,et al.  Correlation considerations : Effects of plate flatness , 2000 .

[415]  Francis T.K. Au,et al.  Effects of random road surface roughness and long-term deflection of prestressed concrete girder and cable-stayed bridges on impact due to moving vehicles , 2001 .

[416]  Myung-Seog Yang,et al.  A study on the free vibration of the joined cylindrical–spherical shell structures , 2000 .

[417]  N. E. Shanmugam,et al.  Design for openings in cold-formed steel channel stub columns , 2001 .

[418]  Raymond H. Plaut,et al.  BEHAVIOR OF PAIR OF LEANING ARCH-SHELLS UNDER SNOW AND WIND LOADS , 1999 .

[419]  Milija N. Pavlović,et al.  Finite‐element model sensitivity in the vibration of partially embedded beams , 1999 .

[420]  B. Sankar,et al.  Analysis of sandwich beams with functionally graded core , 2001 .

[421]  Feargal Brennan,et al.  The effect of rack/rib plate on the stress concentration factors in jack-up chords , 2001 .

[422]  Zella Kahn-Jetter,et al.  Finite element analysis of an involute spline , 2000 .

[423]  R. M. Grice,et al.  Vibration analysis of a thin-plate box using a finite element model which accommodates only in-plane motion , 2000 .

[424]  Hsuan-Teh Hu,et al.  Maximization of the fundamental frequencies of laminated cylindrical shells with respect to fiber orientations , 1999 .

[425]  Marco Petrangeli,et al.  Fiber Element for Cyclic Bending and Shear of RC Structures. I: Theory , 1999 .

[426]  S. Sloan,et al.  Refined explicit integration of elastoplastic models with automatic error control , 2001 .

[427]  A. Tjernberg.  Load distribution and pitch errors in a spline coupling , 2001 .

[428]  Chen Wanji,et al.  The application of a refined non-conforming quadrilateral plate bending element in thin plate vibration and stability analysis , 2000 .

[429]  Franz G. Rammerstorfer,et al.  A General approach to the wrinkling instability of sandwich plates , 2001 .

[430]  S. Lopez.  Geometrically nonlinear analysis of plates and cylindrical shells by a predictor–corrector method , 2001 .

[431]  J. Neumann,et al.  Analysis of Shell Structures under Transient Loading Using Adaptivity in Time and Space , 2001 .

[432]  Michael Ortiz,et al.  Fully C1‐conforming subdivision elements for finite deformation thin‐shell analysis , 2001, International Journal for Numerical Methods in Engineering.

[433]  Romualdo Ruotolo,et al.  A COMPARISON OF SOME THIN SHELL THEORIES USED FOR THE DYNAMIC ANALYSIS OF STIFFENED CYLINDERS , 2001 .

[434]  V. N Skopinsky,et al.  Stresses in ellipsoidal pressure vessel heads with noncentral nozzle , 2000 .

[435]  Third-order Nedelec tetrahedral finite element , 2001 .

[437]  M. A. Crisfield,et al.  Dynamic analysis of 3D beams with joints in presence of large rotations , 2001 .

[438]  C. Chinosi,et al.  Remarks on partial selective reduced integration method for Reissner–Mindlin plate problem , 1999 .

[439]  Amin Ghali,et al.  Punching of Concrete Slabs due to Column Moment Transfer , 2000 .

[440]  Liviu Librescu,et al.  Static and Dynamic Validations of a Refined Thin-Walled Composite Beam Model , 2001 .

[441]  Kjell Magne Mathisen,et al.  Error estimation and adaptivity in explicit nonlinear finite element simulation of quasi-static problems , 1999 .

[442]  Edward A. Sadek,et al.  A finite element model for the analysis of stiffened laminated plates , 2000 .

[443]  António J.M. Ferreira,et al.  Buckling behaviour of composite shells , 2000 .

[444]  Mikhail Itskov,et al.  Composite laminates: nonlinear interlaminar stress analysis by multi-layer shell elements , 2000 .

[445]  Jin-Guang Teng,et al.  Axisymmetric shells and plates on tensionless elastic foundations , 1999 .

[446]  T. Lim,et al.  Vibration characteristics of welded beam and plate structures , 2001 .

[447]  Jianguo Huang,et al.  On mortar-type Morley element method for plate bending problem , 2001 .

[448]  Tomasz Wierzbicki,et al.  THE CONCEPT OF DOUBLE-WALLED SANDWICH COLUMNS FOR ENERGY ABSORPTION , 1999 .

[449]  Guo-Feng Yao,et al.  A New Intelligent 3-D Thin Shell Element and the Optimal Dynamic Shape Control of a Paraboloid Antenna , 2000 .

[450]  N. Jones,et al.  Inertia effects in axisymmetrically deformed cylindrical shells under axial impact , 2000 .

[451]  Robert L. Taylor,et al.  Triangular finite elements with rotational degrees of freedom and enhanced strain modes , 2000 .

[452]  F. Kolkailah,et al.  The Study of Empirical Methodology To Observe Damping Characteristics of Various Laminate Composite Plates , 2001 .

[453]  M. Mukhopadhyay,et al.  A new triangular stiffened plate element for laminate analysis , 2000 .

[454]  Y. Lee,et al.  FINITE ELEMENT ANALYSIS OF THREE-DIMENSIONAL VIBRATIONS OF THICK CIRCULAR AND ANNULAR PLATES , 2000 .

[455]  J. A. Teixeira de Freitas,et al.  Hybrid finite element formulations for elastodynamic analysis in the frequency domain , 1999 .

[456]  J. Dario Aristizabal-Ochoa,et al.  Reinforced, Partially, and Fully Prestressed Slender Concrete Columns under Biaxial Bending and Axial Load , 2001 .

[457]  Daniel J. Inman,et al.  Effects of modeling assumptions on loss factors predicted for viscoelastic sandwich beams , 1999, Smart Structures.

[458]  Lip H. Teh,et al.  Cubic beam elements in practical analysis and design of steel frames , 2001 .

[459]  L. Rose,et al.  Thermal stresses in a plate with a circular reinforcement , 2000 .

[460]  Jakob Kuttenkeuler,et al.  A Finite Element Based Modal Method for Determination of Plate Stiffnesses Considering Uncertainties , 1999 .

[461]  Viktor E. Verijenko,et al.  Structural analysis of composite lattice shells of revolution on the basis of smearing stiffness , 2001 .

[462]  Rj Leichti,et al.  The Role of Bearing Plates in the Five-Point Bending Tests of Structural-Size Lumber , 1999 .

[463]  W. H. Semke,et al.  Modal analysis of a hybrid grillage-plate-membrane structure , 2000 .

[464]  Enrico Sciubba,et al.  Minimization of the Local Rates of Entropy Production in the Design of Air-Cooled Gas Turbine Blades , 1999 .

[465]  F. Chu,et al.  THE INFLUENCE OF ROTATION ON VIBRATION OF A THICK CYLINDRICAL SHELL , 2001 .

[466]  Nabil Kerdid,et al.  Conforming finite element approximation for shells with little regularity , 2000 .

[467]  Chul Kim,et al.  Finite Element Analyses of Specific Damping Capacity and Undamped/Damped Forced Motion of Composite Plate Using Modified 16-Node Solid Elements , 2000 .

[469]  Manicka Dhanasekar,et al.  A layered line element for the flexural analysis of cyclically loaded reinforced concrete beam–columns , 2000 .

[470]  A McRobie,et al.  The post-processed Galerkin method applied to non-linear shell vibrations , 1999 .

[471]  K. Sab,et al.  Un nouveau modèle de plaque multicouche épaisse , 2001 .

[472]  Izuru Takewaki,et al.  Efficient inverse frequency design of tapered beams including shear deformations , 1999 .

[473]  Lars Pilgaard Mikkelsen.  A numerical axisymmetric collapse analysis of viscoplastic cylindrical shells under axial compression , 1999 .

[474]  Dieter Weichert,et al.  Comparison of numerical modelling and experiments for the dynamic response of circular elasto-viscoplastic plates , 2000 .

[475]  Alan Palazzolo,et al.  NON-LINEAR FUZZY LOGIC CONTROL FOR FORCED LARGE MOTIONS OF SPINNING SHAFTS , 2000 .

[476]  Joseph A. Yura,et al.  Bracing Requirements of Inelastic Columns , 1999 .

[477]  Christopher J. Earls.  Single angle geometric axis flexure , 2001 .

[478]  Chih-Chen Chang,et al.  Finite-Element Model Updating for the Kap Shui Mun Cable-Stayed Bridge , 2001 .

[479]  B. P. Patel,et al.  Shear flexible field‐consistent curved spline beam element for vibration analysis , 1999 .

[480]  Somenath Mukherjee,et al.  Analysis of shear locking in Timoshenko beam elements using the function space approach , 2001 .

[481]  António A. Fernandes,et al.  Modelling of concrete beams reinforced with FRP re-bars , 2001 .

[482]  Gordan Jelenić,et al.  Geometrically exact 3D beam theory: implementation of a strain-invariant finite element for statics and dynamics , 1999 .

[483]  James H. Starnes,et al.  A new stiffened shell element for geometrically nonlinear analysis of composite laminates , 2000 .

[484]  Christopher J. Earls,et al.  GEOMETRIC FACTORS INFLUENCING STRUCTURAL DUCTILITY IN COMPACT I-SHAPED BEAMS , 2000 .

[485]  Siaw Meng Chou,et al.  Stress analysis of a postbuckled laminated composite plate , 1999 .

[486]  B. P. Patel,et al.  Transient Dynamics of Thick Skew Sandwich Laminates Under Thermal/Mechanical Loads , 2001 .

[487]  Ezgi Günay,et al.  Finite-Element Analysis of Laminated Stiffened Cylindrical Shallow Shell , 1999 .

[488]  Bhushan Lal Karihaloo,et al.  Homogenization-based multivariable element method for pure torsion of composite shafts , 2001 .

[489]  Lawrence W. Rehfield,et al.  DESIGN OF THIN-WALLED LAMINATED COMPOSITE BEAMS TO RESIST BUCKLING , 1999 .

[490]  Marcin Kamiński,et al.  Stochastic second-order perturbation approach to the stress-based finite element method , 2001 .

[491]  J. Pitkäranta,et al.  A benchmark study of reduced-strain shell finite elements: quadratic schemes , 2000 .

[492]  R. P. Shimpi,et al.  A new layerwise trigonometric shear deformation theory for two-layered cross-ply beams , 2001 .

[493]  Carlos E. S. Cesnik,et al.  Obliqueness effects in asymptotic cross-sectional analysis of composite beams , 2000 .

[494]  O. Bauchau,et al.  Computational schemes for non-linear elasto-dynamics , 1999 .

[495]  Jamshid Ghaboussi,et al.  Simulation of Construction of Cable-Stayed Bridges , 1999 .

[496]  R. D. Wood,et al.  Finite element analysis of air supported membrane structures , 2000 .

[497]  Robert L. Taylor,et al.  A systematic construction of B‐bar functions for linear and non‐linear mixed‐enhanced finite elements for plane elasticity problems , 1999 .

[498]  E. Providas,et al.  A simple finite element model for the geometrically nonlinear analysis of thin shells , 1999 .

[499]  R. Piltner.  An alternative version of the Pian–Sumihara element with a simple extension to non-linear problems , 2000 .

[500]  Shin-Hyoung Kang,et al.  APPLICATION OF FREE VIBRATION ANALYSIS OF MEMBRANES USING THE NON-DIMENSIONAL DYNAMIC INFLUENCE FUNCTION , 2000 .

[501]  H. D. Wright,et al.  Experimental and finite element study of profiled steel sheet dry board folded plate structures , 2000 .

[502]  Kamran Daneshjoo,et al.  Coupled thermoelasticity in laminated composite plates based on Green–Lindsay model , 2002 .

[503]  S.T.S. Al-Hassani,et al.  The influence of inertia and strain-rate on large deformation of plate-structures under impact loading , 2001 .

[504]  Nickolas Vlahopoulos,et al.  An investigation of power flow in the mid-frequency range for systems of co-linear beams based on a hybrid finite element formulation , 2001 .

[505]  S. I. Sagatun,et al.  Boundary Control of a Transversely Vibrating Beam Via Lyapunov Method , 2000 .

[506]  Jin Hee Kim,et al.  A study on the dynamic stability of plates under a follower force , 2000 .

[507]  Transverse shear and normal stresses in nonlinear shell theory , 2000 .

[508]  X. Ye.  A rectangular element for the Reissner–Mindlin plate , 2000 .

[509]  Manil Suri,et al.  Upper and lower error bounds for plate-bending finite elements , 2000, Numerische Mathematik.

[510]  Tso-Liang Teng,et al.  Nonlinear forced vibration analysis of the rectangular plates by the Fourier series method , 1999 .

[512]  V. Skopinsky.  Stress concentration in cone–cylinder intersection , 2001 .

[513]  Jean-Louis Batoz,et al.  On the linear analysis of plates and shells using a new-16 degrees of freedom flat shell element , 2000 .

[514]  Sensitizing according to Courant the Timoshenko beam finite element solution , 2000 .

[515]  Rachid Younsi,et al.  Dynamic study of a wind turbine blade with horizontal axis , 2001 .

[516]  Michel Potier-Ferry,et al.  A numerical continuation method based on Padé approximants , 2000 .

[517]  J.-P. Pelle,et al.  Error estimation for plate structures: Application using the DKT element , 1999 .

[518]  Chien-Ching Ma,et al.  Experimental Investigation of Vibrating Laminated Composite Plates by Optical Interferometry Method , 2001 .

[519]  Philippe Boisse,et al.  ERROR ESTIMATION THROUGH THE CONSTITUTIVE RELATION FOR REISSNER-MINDLIN PLATE BENDING FINITE ELEMENTS , 1999 .

[520]  Kerstin Weinberg.  An adaptive finite element approach for a mixed Reissner-Mindlin plate formulation , 2001 .

[521]  K. Y. Sze,et al.  Hybrid stress tetrahedral elements with Allman's rotational D.O.F.s , 2000 .

[522]  Wu Yaping,et al.  Analysis of shear lag and shear deformation effects in laminated composite box beams under bending loads , 2002 .

[523]  Wilfried B. Krätzig,et al.  Increasing solution stability for finite-element modeling of elasto-plastic shell response , 1999 .

[524]  Yang Xiang,et al.  Evaluation of modal stress resultants in freely vibrating plates , 2001 .

[525]  D. V. Griffiths,et al.  Modelling of elastic continua using a grillage of structural elements based on discrete element concepts , 2001 .

[526]  Sreenivas Alampalli,et al.  Computer-aided implementation of a new procedure for design of end-plates and base-plates for traffic support structures , 2001 .

[527]  Ting-Jung Chen,et al.  Effect of satisfying stress boundary conditions in the axisymmetric vibration analysis of circular and annular plates , 2001 .

[528]  A. Zamanov.  The Effect of Structural Curvings on the Stress Distribution in a Rigidly Fixed Composite Plate under Forced Vibration , 2002 .

[529]  Brian L. Wardle,et al.  RESPONSE OF TRANSVERSELY-LOADED COMPOSITE SHELLS: BIFURCATION, LIMIT-POINT BUCKLING, AND DYNAMIC COLLAPSE , 1999 .

[530]  R. Picón,et al.  A systematic deduction of linear natural approach equations , 1999 .

[531]  Robert E. Rowlands,et al.  Hybrid stress analysis of perforated composites using strain gages , 2001 .

[532]  J. Argyris,et al.  The TRIC shell element: theoretical and numerical investigation , 2000 .

[533]  Kwok-Fai Chung,et al.  INVESTIGATION ON VIERENDEEL MECHANISM IN STEEL BEAMS WITH CIRCULAR WEB OPENINGS , 2001 .

[534]  M. Mukhopadhyay,et al.  A new finite element for buckling analysis of laminated stiffened plates , 1999 .

[535]  H. Takabatake,et al.  A SIMPLIFIED ANALYSIS OF ELASTIC PLATES WITH EDGE BEAMS , 1999 .

[536]  J. R. Sorem,et al.  Multiaxial Stress Concentration in Filleted Shafts , 2001 .

[537]  J. P. Moitinho de Almeida,et al.  Use of Hybrid Mixed Finite Element Models for the Characterisation of the Boundary Layer in Reissner-Mindlin Plates , 1999 .

[538]  Daniel C. Hammerand,et al.  Thermoviscoelastic Analysis of Composite Structures Using a Triangular Flat Shell Element , 1999 .

[539]  Seung-Keun Park,et al.  DYNAMIC STABILITY OF A COMPLETELY FREE CIRCULAR CYLINDRICAL SHELL SUBJECTED TO A FOLLOWER FORCE , 2000 .

[540]  A. Hutchinson,et al.  CONCRETE BEAMS STRENGTHENED WITH EXTERNALLY BONDED FRP PLATES , 2001 .

[541]  Jaroslav Mackerle,et al.  Finite element linear and nonlinear, static and dynamic analysis of structural elements – an addendum – A bibliography (1996‐1999) , 2000 .

[543]  William James Stronge,et al.  Dynamic buckling of an imperfect elastic, visco-plastic plate , 2000 .

[544]  Jean-François Fontaine,et al.  Influence of roughness on characteristics of tight interference fit of a shaft and a hub , 2001 .

[545]  Vincent Manet,et al.  Hybrid finite elements for the computation of sandwich plates , 2001 .

[546]  Yang-Cheng Wang.  Effect of cable stiffness on a cable-stayed bridge , 1999 .

[547]  Isaac Elishakoff,et al.  The bird's eye view on finite element method for structures with large stochastic variations , 1999 .

[548]  Sing‐chih Tang,et al.  Application of the Radial Return Method to Compute Stress Increments From Mroz’s Hardening Rule , 2001 .

[549]  A. S. Bassiouni,et al.  Dynamic analysis for laminated composite beams , 1999 .

[551]  Robert F. Zueck.  Modeling the pay-out and reel-in of cable , 1999 .

[552]  Christopher J. Earls,et al.  Constant moment behavior of high-performance steel I-shaped beams , 2001 .

[553]  Tai-Kuang Lee,et al.  Analysis of Composite Beam-Columns under Lateral Cyclic Loading , 2001 .

[554]  Hyo-Gyoung Kwak,et al.  Effect of warping in geometric nonlinear analysis of spatial beams , 2001 .

[555]  M. Mukhopadhyay,et al.  Finite element large deflection static analysis of shallow and deep stiffened shells , 1999 .

[556]  Zhang Qun,et al.  Application of the generalized conforming flat shell element to geometrical non-linear analysis for composite stiffened shell structures , 1999 .

[557]  Christophe Pierre,et al.  Experimental Investigation of Mode Localization and Forced Response Amplitude Magnification for a Mistuned Bladed Disk , 2000 .

[558]  Fernando Fraternali,et al.  On a moderate rotation theory of thin-walled composite beams , 2000 .

[559]  J. N. Reddy,et al.  Problems and remedy for the Ritz method in determining stress resultants of corner supported rectangular plates , 2002 .

[560]  David A. Nethercot,et al.  Parametric study on composite steel beams with precast concrete hollow core floor slabs , 2000 .

[561]  Chien Ming Wang,et al.  BENDING SOLUTIONS OF SECTORIAL MINDLIN PLATES FROM KIRCHHOFF PLATES , 2000 .

[562]  F. Guillet,et al.  Modeling and Detection of Localized Tooth Defects in Geared Systems , 2001 .

[563]  Kuo Mo Hsiao,et al.  A co-rotational formulation for thin-walled beams with monosymmetric open section , 2000 .

[564]  Ole Thybo Thomsen,et al.  Experimental and analytical study on the behavior of foam core sandwich composite plates subjected to in-plane shear stress , 2001 .

[565]  K. M. Liew,et al.  Differential quadrature element method: a new approach for free vibration analysis of polar Mindlin plates having discontinuities , 1999 .

[566]  Lien-Wen Chen,et al.  Random response of a rotating composite blade with flexure–torsion coupling effect by the finite element method , 2001 .

[567]  Xu Zhou,et al.  An improved shear deformation theory for laminated shells addressing transverse stress continuity , 2001 .

[568]  Srinivasan Gopalakrishnan,et al.  A deep rod finite element for structural dynamics and wave propagation problems , 2000 .

[569]  Jaehong Lee,et al.  Free vibration of thin-walled composite beams with I-shaped cross-sections , 2002 .

[570]  A finite/infinite element analysis of thick plate on a layered foundation , 2000 .

[571]  E. Pereira,et al.  Numerical implementation of a hybrid-mixed finite element model for Reissner–Mindlin plates , 2000 .

[572]  P. Vielsack,et al.  Finite element formulation for non-smooth oscillations of an elastic beam with a friction device , 1999 .

[573]  G. H. Lim.  Vibration of plates and shells using finite elements (1996-1997) , 1999 .

[574]  U. Peil,et al.  DYNAMIC BEHAVIOURS OF CABLES IN PARAMETRICALLY UNSTABLE ZONES , 1999 .

[575]  Wieslaw Ostachowicz,et al.  An algorithm of a family of 3D-based, solid-to-shell transition, hpq/hp-adaptive finite elements , 2000 .

[576]  Atef F. Saleeb,et al.  Nonlinear Dynamics for Mixed Shells with Large Rotation and Elastoplasticity , 2000, Int. J. Comput. Eng. Sci..

[577]  Cesare Davini,et al.  An Unconstrained Mixed Method for the Biharmonic Problem , 2000, SIAM J. Numer. Anal..

[578]  T. V. S. R. Appa Rao,et al.  Non-linear dynamic response of a reinforced concrete secondary containment shell subjected to seismic load , 2001 .

[579]  Paul M. Weaver,et al.  The effect of flexural/twist anisotropy on compression buckling of quasi-isotropic laminated cylindrical shells , 2002 .

[580]  Raid Karoumi.  Modeling of Cable Stayed Bridges for Analysis of Traffic Induced Vibrations , 2000 .

[581]  Benjamin W. Schafer,et al.  Torsion in thin-walled cold-formed steel beams , 2000 .

[582]  YuanTong Gu,et al.  A local point interpolation method (LPIM) for static and dynamic analysis of thin beams , 2001 .

[583]  J. J. R. Cheng,et al.  Buckling of stiffened steel plates—a parametric study , 1999 .

[584]  Yavuz Başar,et al.  Free-vibration analysis of thin/thick laminated structures by layer-wise shell models , 2000 .

[585]  M. Ghosn,et al.  PSEUDOFORCE METHOD FOR NONLINEAR ANALYSIS AND REANALYSIS OF STRUCTURAL SYSTEMS , 2001 .

[586]  Carsten Carstensen,et al.  Calculating the energy-norm FEM-error for Reissner–Mindlin plates without known reference solution , 2000 .

[587]  Hyonny Kim,et al.  A method for modeling the local and global buckling of delaminated composite plates , 1999 .

[588]  S. J. Lee,et al.  FREE-VIBRATION ANALYSIS OF PLATES AND SHELLS WITH A NINE-NODE ASSUMED NATURAL DEGENERATED SHELL ELEMENT , 2001 .

[590]  Su-huan Chen,et al.  Interval finite element method for beam structures , 2000 .

[591]  Cecil G. Armstrong,et al.  Dimensional Reduction of Surface Models for Analysis , 2000, Engineering with Computers.

[592]  T. S. Lok,et al.  BENDING AND FORCED VIBRATION RESPONSE OF A CLAMPED ORTHOTROPIC THICK PLATE AND SANDWICH PANEL , 2001 .

[593]  Mikko Lyly,et al.  On the connection between some linear triangular Reissner-Mindlin plate bending elements , 2000, Numerische Mathematik.

[594]  A. Ibrahimbegovic,et al.  On rigid components and joint constraints in nonlinear dynamics of flexible multibody systems employing 3D geometrically exact beam model , 2000 .

[595]  Bhushan Lal Karihaloo,et al.  An improved hybrid-stress element approach to torsion of shafts , 1999 .

[596]  Bernard Nayroles.  Plate theory and complementary displacement method , 1999 .

[597]  L. P. Lebedev,et al.  The problem of the equilibrium of a plate reinforced with stiffeners , 1999 .

[598]  Nils-Erik Wiberg,et al.  Adaptive FE-analysis of Column Supported Reissner-Mindlin Plates , 1999 .

[599]  M. Dauge,et al.  Boundary layer realization in thin elastic three-dimensional domains and two-dimensional Hierarchic plate models , 2000 .

[600]  Erasmo Carrera,et al.  Multilayered shell finite element with interlaminar continuous shear stresses : a refinement of the Reissner-Mindlin formulation , 2000 .

[601]  M. Fasching.  Thermal Analysis of Plates with Different Geometry , 2000 .

[602]  Jan Błachut,et al.  On the Choice of Initial Geometric Imperfections in Externally Pressurized Shells , 1999 .

[603]  J. W. Leonard,et al.  Finite element analysis of membrane wrinkling , 2001 .

[604]  P. H. Kirkegaard,et al.  FINITE ELEMENT MODELLING OF INFINITE EULER BEAMS ON KELVIN FOUNDATIONS EXPOSED TO MOVING LOADS IN CONVECTED CO-ORDINATES , 2001 .

[605]  Carlos A. Mota Soares,et al.  BUCKLING AND DYNAMIC BEHAVIOUR OF LAMINATED COMPOSITE STRUCTURES USING A DISCRETE HIGHER-ORDER DISPLACEMENT MODEL , 1999 .

[606]  Hiroyuki Matsunaga,et al.  Vibration and stability of cross-ply laminated composite plates according to a global higher-order plate theory , 2000 .

[607]  C. Jenkins,et al.  Dynamics of a seamed precision membrane , 1999 .

[608]  Tomasz Wierzbicki,et al.  Effect of an ultralight metal filler on the bending collapse behavior of thin-walled prismatic columns , 1999 .

[609]  R. E. Rossi.  TRANSVERSE VIBRATIONS OF THIN, ORTHOTROPIC RECTANGULAR PLATES WITH RECTANGULAR CUTOUTS WITH FIXED BOUNDARIES , 1999 .

[610]  M. R. Eslami,et al.  THERMOELASTIC BUCKLING OF THIN SPHERICAL SHELLS , 2001 .

[611]  A. R. de Faria,et al.  Optimal buckling loads of nonuniform composite plates with thermal residual stresses , 1999 .

[612]  B. P. Patel,et al.  Dynamic analysis of laminated composite plates subjected to thermal/mechanical loads using an accurate theory , 2001 .

[613]  E. Bertóti.  Dual‐mixed p and hp finite elements for elastic membrane problems , 2002 .

[614]  Hsuan-Teh Hu,et al.  Buckling analysis of skew laminate plates subjected to uniaxial inplane loads , 2000 .

[615]  Venkatesh Kodur,et al.  Factors governing redistribution of moment in continuous prestressed concrete beams , 1999 .

[616]  V.A. Gridchin,et al.  Calculation of deflection and mechanical stresses in plates of the rectangular form by variational and numerical methods , 2000, Proceedings KORUS 2000. The 4th Korea-Russia International Symposium On Science and Technology.

[617]  Antonio Huerta,et al.  Adaptive analysis of yield line patterns in plates with the arbitrary Lagrangian–Eulerian method , 1999 .

[618]  Narong Thonchangya.  Analysis of the Bending of a Uniformly Loaded Rectangular Plate with Variable Width Corner Supports , 2001, Int. J. Comput. Eng. Sci..

[619]  Ernst Rank,et al.  The p‐version of the finite element method for three‐dimensional curved thin walled structures , 2001 .

[620]  Eugenio Dragoni.  Designing the cross-section of curved beams for equal magnitude of peak bending stresses , 2001 .

[621]  G. Rao,et al.  Prediction of Fundamental Frequencies of Stressed Spring-Hinged Tapered Beams , 2001 .

[622]  T. Miyamura,et al.  Application of the Degenerated Timoshenko Beam Element Using the Adaptively Shifted Integration Technique to Elastic-Plastic Analyses Considering Large Displacements : Rotations , 1999 .

[623]  Ji-Hwan Kim,et al.  ON THE DYNAMIC STABILITY OF A COMPLETELY FREE CYLINDRICAL SHELL SUBJECTED TO A FOLLOWER FORCE , 1999 .

[624]  S. A. Meguid,et al.  A new shell element accounting for through-thickness deformation , 2000 .

[625]  Rezak Ayad,et al.  An improved three‐node hybrid‐mixed element for Mindlin/Reissner plates , 2001 .

[626]  Chuck A. Plaxico,et al.  Performance of W-Beam Splices , 2001 .

[627]  Xiaobing Feng,et al.  Two-level overlapping Schwarz methods for plate elements on unstructured meshes using non-matching coarse grids , 1999 .

[628]  R. Hauptmann,et al.  Extension of the ‘solid‐shell’ concept for application to large elastic and large elastoplastic deformations , 2000 .

[629]  Olivier Polit,et al.  High-order triangular sandwich plate finite element for linear and non-linear analyses , 2000 .

[630]  Erasmo Carrera,et al.  A family of shear-deformable shell finite elements for composite structures , 2000 .

[631]  Eccentrically Loaded Steel Columns under Cyclic Out-of-Plane Loading , 2000 .

[632]  Raid Karoumi,et al.  Some modeling aspects in the nonlinear finite element analysis of cable supported bridges , 1999 .

[633]  Matthew P. Cartmell,et al.  Dynamic responses of structures to moving bodies using combined finite element and analytical methods , 2001 .

[634]  M. El-Attar,et al.  Non-linear cable response to multiple support periodic excitation , 2000 .

[635]  F. Rammerstorfer,et al.  Buckling of stretched strips , 2000 .

[636]  M. Mukhopadhyay,et al.  Estimation of Layerwise Elastic Parameters of Stiffened Composite Plates , 2000 .

[637]  Mingrui Li,et al.  The finite deformation theory for beam, plate and shell. Part V. The shell element with drilling degree of freedom based on Biot strain , 2000 .

[638]  Poul Colberg Olsen.  Rigid-plastic finite element analysis of steel plates, structural girders and connections , 2001 .

[639]  Phill-Seung Lee,et al.  Defect-free 4-node flat shell element: NMS-4F element , 1999 .

[640]  R. E. Rossi,et al.  Out of plane vibrations of thin-walled curved beams considering shear flexibility , 1999 .

[641]  Aditi Chattopadhyay,et al.  Dynamic instability of composite laminates using a higher order theory , 2000 .

[642]  Jie Pan,et al.  Modal characteristics of in-plane vibration of rectangular plates , 1999 .

[643]  Chin-Hsiung Loh,et al.  Experimental and theoretical study on softening and pinching effects of bridge column , 2001 .

[644]  Maurice Petyt,et al.  GEOMETRICAL NON-LINEAR, STEADY STATE, FORCED, PERIODIC VIBRATION OF PLATES, PART II: STABILITY STUDY AND ANALYSIS OF MULTI-MODAL RESPONSE , 1999 .

[645]  Chung-Souk Han,et al.  An h-adaptive method for elasto-plastic shell problems , 2000 .

[646]  Jin O. Kim,et al.  FREE BENDING VIBRATION OF A MULTI-STEP ROTOR , 1999 .

[647]  Yoshihiko Sugiyama,et al.  Dynamic stability of an elastically restrained column subjected to triangulary distributed subtangential forces , 2000 .

[648]  Zheng,et al.  Applications of wavelet Galerkin FEM to bending of plate structure , 1999 .

[649]  P. Chen,et al.  SOLVING LARGE SYSTEMS OF EQUATIONS ON INTEL-PARAGON , 1999 .

[650]  Romil Tanov,et al.  Finite element implementation of a new sandwich homogenization procedure , 2000 .

[651]  Kyung-Jae Shin,et al.  Hysteresis behavior of CFT column to H-beam connections with external T-stiffeners and penetrated elements , 2001 .

[652]  Thermal analysis of FRP chimneys using consistent laminated shell element , 2000 .

[653]  Lien-Wen Chen,et al.  Random vibration and reliability of a damped thick rotating blade of generally orthotropic material , 2001 .

[654]  Yoon Young Kim,et al.  A one‐dimensional theory of thin‐walled curved rectangular box beams under torsion and out‐of‐plane bending , 2002 .

[655]  Michael A. Puso,et al.  A highly efficient enhanced assumed strain physically stabilized hexahedral element , 2000 .

[656]  Noureddine Bouhaddi,et al.  SIMPLIFICATION OF FINITE ELEMENT MODELS FOR STRUCTURES HAVING A BEAM-LIKE BEHAVIOUR , 2000 .

[657]  M. Touratier,et al.  Non-linear dynamic stability characteristics of elastic plates subjected to periodic in-plane load , 2000 .

[658]  Ashraf Ayoub,et al.  A two-field mix variational principle for partially connected composite beams , 2001 .

[659]  S. Hashemi,et al.  A Dynamic Finite Element (DFE) formulation for coupled flap-lag vibrations of propeller blades , 2000 .

[660]  K. Wiśniewski,et al.  Warping and in-plane twist parameters in kinematics of finite rotation shells , 2001 .

[661]  Carsten Carstensen,et al.  Adaptive mixed finite element method for Reissner-Mindlin plate , 2001 .

[662]  Chiara Bisagni,et al.  Numerical analysis and experimental correlation of composite shell buckling and post-buckling , 2000 .

[663]  NONLINEAR THROUGH-THICKNESS BEHAVIOR OF SHELLS USING 2-D FINITE ELEMENTS , 1999 .

[664]  Gareth A. Vio,et al.  Finite Element / Modal Technique for Non-linear Plate and Stiffened Panel Response Prediction , 2001 .

[665]  E. Alarćon,et al.  Numerical analysis of axisymmetric shells by one-dimensional continuum elements suitable for high frequency excitations , 2000 .

[666]  Evariste Sanchez-Palencia.  ON SENSITIVITY AND RELATED PHENOMENA IN THIN SHELLS WHICH ARE NOT GEOMETRICALLY RIGID , 1999 .

[667]  H. Türkmen.  STRUCTURAL RESPONSE OF LAMINATED COMPOSITE SHELLS SUBJECTED TO BLAST LOADING: COMPARISON OF EXPERIMENTAL AND THEORETICAL METHODS , 2002 .

[668]  R. P. Shimpi,et al.  A beam finite element based on layerwise trigonometric shear deformation theory , 2001 .

[669]  Jan Błachut,et al.  On buckling of toroidal shells under external pressure , 2000 .

[670]  Boštjan Brank,et al.  On the relation between different parametrizations of finite rotations for shells , 2001 .

[671]  Alfred G. Striz,et al.  High-accuracy plane stress and plate elements in the quadrature element method , 1995 .

[672]  A. Rasskazov,et al.  Nonaxisymmetric vibrations of a shell of revolution made of a viscoelastic material under nonstationary loading , 1999 .

[673]  R. Hauptmann,et al.  On volumetric locking of low‐order solid and solid‐shell elements for finite elastoviscoplastic deformations and selective reduced integration , 2000 .

[674]  Elsa Liberman,et al.  A posteriori error estimator for a mixed finite element method for Reissner-Mindlin plate , 2001, Math. Comput..

[675]  Renato Vitaliani,et al.  Non-linear dynamic analysis of cable-suspended structures subjected to wind actions , 2001 .

[676]  José Roberto de França Arruda,et al.  Spectral element-based prediction of active power flow in Timoshenko beams , 2001 .

[677]  Emilio Turco,et al.  Elasto-plastic analysis of Kirchhoff plates by high simplicity finite elements , 2000 .

[678]  Ji-Hwan Kim,et al.  Effect of a concentrated mass on the spinning free-free beam subjected to a thrust , 2001 .

[679]  Aly S. Nazmy,et al.  Effect of aspect ratio on the elastic buckling of uniaxially loaded plates with eccentric holes , 2001 .

[680]  Georg Thierauf,et al.  Finite rotations in non-linear analysis of elastic shells , 2001 .

[681]  Antonio Capsoni,et al.  Limit analysis of plates-a finite element formulation , 1999 .

[682]  W. Xi,et al.  THEORETICAL SOLUTION AND FINITE ELEMENT SOLUTION FOR AN ORTHOTROPIC THICK CYLINDRICAL SHELL UNDER IMPACT LOAD , 2000 .

[683]  Kang Fu.  Hierarchical model adaptivity in finite element analysis for non-linear plate problems , 2002 .

[684]  Mahen Mahendran,et al.  Local buckling behaviour of steel plate elements supported by a plastic foam material , 1996 .

[685]  B. K. Hadi.  Wrinkling of sandwich column: comparison between finite element analysis and analytical solutions , 2001 .

[686]  Lateral bending vibrations of a beam with small pretwist , 2000 .

[687]  Atik Taufik,et al.  Composite beam analysis with arbitrary cross section , 1999 .

[688]  P. Gasbarri,et al.  Structural Dynamics of a Cantilever Wing-Like Anisotropic Swept Plate , 2000 .

[689]  Norman Jones,et al.  Influence of stress waves on the dynamic progressive and dynamic plastic buckling of cylindrical shells , 2001 .

[690]  Werner Wagner,et al.  THEORY AND NUMERICS OF THREE-DIMENSIONAL BEAMS WITH ELASTOPLASTIC MATERIAL BEHAVIOUR ∗ , 2000 .

[691]  W. Schneider,et al.  Biegebeanspruchung schlanker Zylinderschalen unter einzelner Querlast und Windlast - Zwei signifikant unterschiedliche Instabilitätsfälle , 2001 .

[692]  Y. K. Cheung,et al.  Two refined non‐conforming quadrilateral flat shell elements , 2000 .

[693]  J. Nemes,et al.  Time Domain Finite Element Simulations of Damped Multilayered Beams Using a Prony Series Representation , 2000 .

[694]  A. Galip Ulsoy,et al.  DYNAMICS OF PRESTRESSED ROTATING ANISOTROPIC PLATES SUBJECT TO TRANSVERSE LOADS AND HEAT SOURCES, PART I: MODELLING AND SOLUTION METHOD , 2000 .

[696]  Suh-Yuh Yang,et al.  Least-squares finite element approximations to the Timoshenko beam problem , 2000, Appl. Math. Comput..

[697]  Guido Dhondt,et al.  The effect of the geometry and the load level on the dynamic failure of rotating disks , 1999 .

[698]  R. Vitaliani,et al.  A non-linear finite element formulation for shells of arbitrary geometry , 2001 .

[699]  K. S. Sai Ram,et al.  Buckling of laminated composite shells under transverse load , 2002 .

[700]  Sung-Kie Youn,et al.  Stress-based finite element analysis of plane plasticity problems , 1999 .

[701]  S K Sahu,et al.  Dynamic instability of laminated composite rectangular plates subjected to non-uniform harmonic in-plane edge loading , 2000 .

[702]  Sotiris Kellas,et al.  Design, Fabrication, and Testing of Composite Energy-Absorbing Keel Beams for General Aviation Type Aircraft , 2001 .

[703]  R. Palaninathan,et al.  Explicit through-thickness integration schemes for geometric nonlinear analysis of laminated composite shells , 1999 .

[704]  K. Y. Sze,et al.  On immunizing five‐beta hybrid‐stress element models from ‘trapezoidal locking’ in practical analyses , 2000 .

[705]  M.-H. H. Shen,et al.  Reliability assessment of high cycle fatigue design of gas turbine blades using the probabilistic Goodman Diagram , 1999 .

[706]  V. Balamurugan,et al.  Dynamic instability of layered anisotropic composite plates on elastic foundations , 1999 .

[707]  J. F. Jullien,et al.  Buckling of cylindrical shells under static and dynamic shear loading , 2000 .

[708]  Yehia A. Khulief,et al.  Dynamic response of spinning tapered Timoshenko beams using modal reduction , 2001 .

[709]  Joseph C. S. Lai,et al.  Prediction of natural frequencies of finite length circular cylindrical shells , 2000 .

[710]  Jan Ming Ko,et al.  Modal indices for identifying damage location in cable-stayed Kap Shui Mun Bridge , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[711]  M. Rubin.  On the theory of a Cosserat point and shear locking in thin beams , 2001 .

[713]  Leszek Marcinkowski.  Domain Decomposition Methods for Mortar Finite Element Discretizations of Plate Problems , 2001, SIAM J. Numer. Anal..

[714]  Z. Tonković,et al.  On nonisothermal elastoplastic analysis of shell components employing realistic hardening responses , 2001 .

[715]  Integrated thermal and mechanical analysis of composite plates and shells , 2000 .

[716]  P. C. Olsen.  Evaluation of triangular plate elements in rigid-plastic finite element analysis of reinforced concrete , 1999 .

[717]  Tae Hyun Baek,et al.  Hybrid Stress Analysis of Perforated Tensile Plates using Multiplied and Sharpened Photoelastic Data and Complex-Variable Techniques , 2000 .

[718]  T. Pian,et al.  An eighteen-node hybrid-stress solid-shell element for homogeneous and laminated structures , 2002 .

[720]  H. Matthies,et al.  Finite elements for stochastic media problems , 1999 .

[721]  Carl T.F. Ross,et al.  Plastic collapse of circular conical shells under uniform external pressure , 1999 .

[722]  Giuseppe Monno,et al.  Frictionally Excited Thermoelastic Instability in Multi-Disk Clutches and Brakes , 2001 .

[723]  P. Frank Pai,et al.  Large-deformation tests and total-Lagrangian finite-element analyses of flexible beams , 2000 .

[724]  Jin-Gon Kim,et al.  A new 3‐node triangular flat shell element , 2002 .

[725]  Tai-Yan Kam,et al.  Material characterization of laminated composite plates via static testing , 2000 .

[726]  Luiz Landau,et al.  A study of some triangular discrete Reissner–Mindlin plate and shell elements , 2000 .

[727]  Ning Hu,et al.  A 3D brick element based on Hu–Washizu variational principle for mesh distortion , 2002 .

[729]  S.-W. Hong,et al.  MODAL ANALYSIS OF MULTI-SPAN TIMOSHENKO BEAMS CONNECTED OR SUPPORTED BY RESILIENT JOINTS WITH DAMPING , 1999 .

[730]  Olivier Polit,et al.  AC1 finite element including transverse shear and torsion warping for rectangular sandwich beams , 1999 .

[731]  K. Hsiao,et al.  A consistent co-rotational finite element formulation for geometrically nonlinear dynamic analysis of 3-D beams , 1999 .

[732]  Christopher J. Earls,et al.  Single angle geometric axis flexure I. Background and model verification , 2001 .

[733]  P. Gonçalves,et al.  Numerical methods for analysis of plates on tensionless elastic foundations , 2001 .

[734]  Chen Wanji,et al.  Refined non-conforming triangular elements for analysis of shell structures , 1999 .

[735]  Jaroslav Zapoměl,et al.  NUMERICAL INVESTIGATION OF A ROTOR SYSTEM WITH DISC-HOUSING IMPACT , 2001 .

[736]  Hans-G. Reimerdes,et al.  Determination of the Energy Absorption of Cylindrical Shells under Axial Loading by Analysis of the Dynamic Buckling and Folding Process , 1999 .

[737]  R. E. Rossi,et al.  ANALYTICAL AND NUMERICAL EXPERIMENTS ON VIBRATING CIRCULAR ANNULAR PLATES OF RECTANGULAR ORTHOTROPY , 1999 .

[738]  Jong-Shyong Wu,et al.  A NEW APPROACH FOR DETERMINING THE NATURAL FREQUENCIES AND MODE SHAPES OF A UNIFORM BEAM CARRYING ANY NUMBER OF SPRUNG MASSES , 1999 .

[739]  Alexei I. Borovkov,et al.  Finite element stress, vibration, and buckling analysis of laminated beams with the use of refined elements , 1999, Other Conferences.

[740]  N. Arakere,et al.  Fretting Stresses in Single Crystal Superalloy Turbine Blade Attachments , 2001 .

[741]  Masayoshi Iwahara,et al.  Modeling and control of a new horizontal-shaft hybrid-type magnetic bearing , 2000, IEEE Trans. Ind. Electron..

[742]  M. Mofid,et al.  On the analytical model of beam-to-column semi-rigid connections, using plate theory , 2001 .

[743]  R. Kouhia,et al.  Stabilized and block approximate inverse preconditioners for problems in solid and structural mechanics , 2001 .

[744]  Heung-Soo Kim,et al.  Biaxial bending collapse of thin-walled beams filled partially or fully with aluminium foam , 2000 .

[745]  Ferdinando Auricchio,et al.  Analysis of mixed finite elements for laminated composite plates , 1999 .

[746]  A. Tjernberg.  Load distribution in the axial direction in a spline coupling , 2001 .

[747]  Amir Mirmiran,et al.  Tests and modeling of carbon-wrapped concrete columns , 2000 .

[748]  T. Scapolla,et al.  Solving cylindrical shell problems with a non-standard finite element 1 This work was supported by P , 1999 .

[749]  Jong-Shyong Wu,et al.  DYNAMIC ANALYSIS OF A UNIFORM CANTILEVER BEAM CARRYING A NUMBER OF ELASTICALLY MOUNTED POINT MASSES WITH DAMPERS , 2000 .

[750]  Sven Klinkel,et al.  A continuum based three-dimensional shell element for laminated structures , 1999 .

[751]  Erwan Verron,et al.  An axisymmetric B-spline model for the non-linear inflation of rubberlike membranes , 2001 .

[752]  Xilin Lu,et al.  Nonlinear analysis on concrete-filled rectangular tubular composite columns , 2000 .

[753]  Torsional rigidity of reinforced concrete bars with arbitrary sectional shape , 2000 .

[754]  Brian Uy,et al.  Bracing of thin walled steel box columns during pumping of wet concrete in tall buildings , 1999 .

[755]  Hong-gun Park,et al.  RC Flat Plate Under Combined In-Plane and Out-of-Plane Loads , 1999 .

[756]  M. Crisfield,et al.  Large‐strain elasto‐plastic shell analysis using low‐order elements , 2001 .

[757]  J. Dunne,et al.  Efficient Extreme Value Prediction for Nonlinear Beam Vibrations Using Measured Random Response Histories , 2001 .

[758]  B. Skallerud,et al.  Simplified stress resultants plasticity on a geometrically nonlinear constant stress shell element , 2001 .

[759]  František Wald,et al.  Embedded steel column bases: I. Experiments and numerical simulation , 2000 .

[760]  M. Sainsbury,et al.  The Galerkin element method applied to the vibration of damped sandwich beams , 1999 .

[761]  Barna A. Szabó,et al.  Linear models of buckling and stress-stiffening , 1999 .

[762]  Gyung-Jin Park,et al.  Transformation of dynamic loads into equivalent static loads based on modal analysis , 1999 .

[763]  Javier Bonet,et al.  Form finding of membrane structures by the updated reference method with minimum mesh distortion , 2001 .

[764]  Ferdinando Auricchio,et al.  A mixed‐enhanced finite‐element for the analysis of laminated composite plates , 1999 .

[765]  Heh Han Meijer,et al.  Effective properties of a viscoplastic constitutive model obtained by homogenisation , 1999 .

[766]  S. Oral,et al.  A pseudo-layered, elastic-plastic, flat-shell finite element , 1999 .

[767]  G.-Q. Li,et al.  Layer-wise closed-form theory for geometrically nonlinear rectangular composite plates subjected to local loads , 1999 .

[768]  Jonathan A. Wickert,et al.  FREE VIBRATION OF COUPLED DISK–HAT STRUCTURES , 2000 .

[769]  M Duan,et al.  EFFECTIVE HYBRID/MIXED FINITE ELEMENTS FOR FOLDED-PLATE STRUCTURES , 2002 .

[770]  P. Subramanian,et al.  Flexural analysis of symmetric laminated composite beams using C1 finite element , 2001 .

[771]  P. Leevers,et al.  Non-uniform and dynamic torsion of elastic beams Part 1: Governing equations and particular solutions , 1999 .

[772]  Alexander G Iosilevich,et al.  Numerical inf-sup analysis of MITC plate bending elements , 1999 .

[773]  K. M. Liew,et al.  Differential quadrature element method for static analysis of Reissner-Mindlin polar plates , 1999 .

[774]  U. Shrinivasa,et al.  A 14-node brick element, PN5X1, exactly representing linear stress fields , 2000 .

[775]  T. Scapolla,et al.  Serendipity and bubble plus hierarchic finite elements for thin to thick plates , 2000 .

[776]  Carlo Sansour,et al.  Families of 4-node and 9-node finite elements for a finite deformation shell theory. An assesment of hybrid stress, hybrid strain and enhanced strain elements , 2000 .

[778]  C. Sansour,et al.  A model of finite strain viscoplasticity based on unified constitutive equations. Theoretical and computational considerations with applications to shells , 2001 .

[779]  Ji-Hwan Kim,et al.  Parametric instability of a cross-ply laminated beam with viscoelastic properties under a periodic force , 2001 .

[780]  Mark Austin,et al.  Structural matrix computations with units , 2000 .

[781]  K. Ip,et al.  Determination of Dynamic Flexural and Shear Moduli of Thick Composite Beams Using Natural Frequencies , 2001 .

[782]  Michel Grédiac,et al.  Phase-stepped deflectometry applied to shape measurement of bent plates , 1999 .

[783]  Y. Matsui,et al.  DYNAMIC STIFFNESS ANALYSIS FOR TORSIONAL VIBRATION OF CONTINUOUS BEAMS WITH THIN-WALLED CROSS-SECTION , 2001 .

[784]  Andrea Spagnoli,et al.  Different buckling modes in axially stiffened conical shells , 2001 .

[785]  Mingrui Li,et al.  The finite deformation theory for beam, plate and shell. Part IV. The Fe formulation of Mindlin plate and shell based on Green-Lagrangian strain , 2000 .

[787]  J. Górski,et al.  Shells with random geometric imperfections simulation — based approach , 2002 .

[788]  Hanbin Ge,et al.  Stiffened steel box columns. Part 2: Ductility evaluation , 2000 .

[789]  Variable-order solid elements for three-dimensional linear elastic structural analysis , 1999 .

[790]  R. M. Grice,et al.  ANALYSIS OF THE FLEXURAL VIBRATION OF A THIN-PLATE BOX USING A COMBINATION OF FINITE ELEMENT ANALYSIS AND ANALYTICAL IMPEDANCES , 2002 .

[791]  Evtim Zakhariev,et al.  Nonlinear Dynamics of Rigid and Flexible Multibody Systems , 2000 .

[792]  Raffaele Casciaro,et al.  Assumed stress formulation of high order quadrilateral elements with an improved in-plane bending behaviour , 2002 .

[793]  M. Mukhopadhyay,et al.  Finite element static and dynamic analyses of folded plates , 1999 .

[794]  O. Sayman,et al.  Elastic–plastic stress analysis and expansion of plastic zone in clamped and simply supported aluminum metal–matrix laminated plates , 2000 .

[795]  K. Chandrashekhara,et al.  Ring Plate on a Transversely Isotropic Elastic Halfspace , 2000 .

[796]  Guanrong Chen,et al.  Numerical computation of a damped slewing beam with tip mass , 1999 .

[797]  Riccardo Barsotti,et al.  The web bridge , 2001 .

[798]  Xiu Ye.  Stabilized finite element approximations for the Reissner–Mindlin plate , 2000, Adv. Comput. Math..

[799]  OPTIMAL ERROR ESTIMATES FOR FEM APPROXIMATIONS OF DYNAMIC NONLINEAR SHALLOW SHELLS , 2000 .

[800]  Hiroki Yamaguchi,et al.  Mode localization in multispan cable systems , 1999 .

[801]  H. Rathod,et al.  General complete Lagrange interpolations with applications to three-dimensional finite element analysis , 2001 .

[802]  Wei-Xin Ren,et al.  Elastic-Plastic Seismic Behavior of Long Span Cable-Stayed Bridges , 1999 .

[803]  R. E. Rossi,et al.  Transverse Vibrations of a Circular, Annular Plate with Free Edges and Two, Intermediate Concentric Circular Supports , 1999 .

[804]  D. Roy Mahapatra,et al.  Finite element analysis of free vibration and wave propagation in asymmetric composite beams with structural discontinuities , 2002 .

[805]  Ki-Seok Kim,et al.  Analysis of target configurations under dead loads for cable-supported bridges , 2001 .

[806]  H. Stumpf,et al.  A shell finite element for large strain elastoplasticity with anisotropies—: Part I: Shell theory and variational principle , 1999 .

[807]  Maurice Petyt,et al.  NON-LINEAR VIBRATION OF BEAMS WITH INTERNAL RESONANCE BY THE HIERARCHICAL FINITE-ELEMENT METHOD , 1999 .

[808]  Zhangzhi Cen,et al.  Finite element buckling analysis of rotationally periodic laminated composite shells , 2002 .

[809]  Julio F. Davalos,et al.  LOCAL BUCKLING OF COMPOSITE FRP SHAPES BY DISCRETE PLATE ANALYSIS , 2001 .

[810]  K. Lam,et al.  FINITE ELEMENT VIBRATION ANALYSIS OF COMPOSITE BEAMS BASED ON HIGHER-ORDER BEAM THEORY , 1999 .

[811]  Shijun Guo,et al.  A SIMPLE APPROXIMATE FORMULATION FOR THE FIRST TWO FREQUENCIES OF ASYMMETRIC WALL–FRAME MULTI-STOREY BUILDING STRUCTURES , 2000 .

[812]  Jong-Shyong Wu,et al.  On the eigenvalues of a uniform cantilever beam carrying any number of spring–damper–mass systems , 1999 .

[813]  Willi W. Schur,et al.  Fine Scale Analysis of Wrinkled Membranes , 2000, Int. J. Comput. Eng. Sci..

[814]  C. Cho,et al.  NONLINEAR POSTBUCKLING BEHAVIOR OF CLAMPED COMPOSITE SANDWICH PLATES , 1999 .

[815]  A. F. Emery,et al.  The solution of elastostatic and elastodynamic problems with Chebyshev spectral finite elements , 2000 .

[816]  J. C. Wohlever.  Some computational aspects of a group theoretic finite element approach to the buckling and postbuckling analyses of plates and shells-of-revolution , 1999 .

[817]  E. Ramm,et al.  A unified approach for shear-locking-free triangular and rectangular shell finite elements , 2000 .

[818]  L. Wullschleger,et al.  Buckling of geometrically imperfect cylindrical shells — definition of a buckling load , 2002 .

[819]  S. Sriram,et al.  Adding bending stiffness to 3-D membrane FEM programs , 2000 .

[820]  Roman Lackner,et al.  A posteriori error estimation in non‐linear FE analyses of shell structures , 2002 .

[821]  Yang-Cheng Wang,et al.  STABILITY ANALYSIS OF BOX-GIRDER CABLE-STAYED BRIDGES , 2001 .

[822]  Chen Wanji,et al.  Refined quadrilateral element based on Mindlin/Reissner plate theory , 2000 .

[823]  G. Stuhne.  One-dimensional dynamics of zonal jets on rapidly rotating spherical shells , 2001 .

[824]  Manicka Dhanasekar,et al.  Plane hybrid stress element method for 3D hollow bodies of uniform thickness , 2001 .

[825]  Qiusheng Li,et al.  EXACT SOLUTIONS FOR FREE LONGITUDINAL VIBRATIONS OF NON-UNIFORM RODS , 2000 .

[826]  Serge Nicaise,et al.  Relationship between the lower frequency spectrum of plates and networks of beams , 2000 .

[827]  Atef F. Saleeb,et al.  Stress Projection, Layerwise-Equivalent, Formulation for Accurate Predictions of Transverse Stresses in Laminated Plates and Shells , 2000, Int. J. Comput. Eng. Sci..

[828]  Song Cen,et al.  A new twelve DOF quadrilateral element for analysis of thick and thin plates , 2001 .

[829]  Marc J. Richard,et al.  A NEW DYNAMIC FINITE ELEMENT (DFE) FORMULATION FOR LATERAL FREE VIBRATIONS OF EULER–BERNOULLI SPINNING BEAMS USING TRIGONOMETRIC SHAPE FUNCTIONS , 1999 .

[830]  T. X. Wu,et al.  a Double Timoshenko Beam Model for Vertical Vibration Analysis of Railway Track at High Frequencies , 1999 .

[831]  P. Weaver.  ANISOTROPY INDUCED SPIRAL BUCKLING IN CYLINDRICAL SHELLS , 2001 .

[832]  Abdullateef M. Al-Khaleefi,et al.  Free vibration analysis of thin arbitrarily laminated anisotropic plates using boundary-continuous displacement Fourier approach , 2001 .

[833]  Eugenio Oñate,et al.  A basic thin shell triangle with only translational DOFs for large strain plasticity , 2001 .

[834]  Chen Wanji,et al.  Refined 9‐Dof triangular Mindlin plate elements , 2001 .

[835]  Roman Lackner,et al.  Adaptive FE Analysis of RC Shells. II: Applications , 2001 .

[836]  Troy E. Meink,et al.  The Effect of Varying Thickness on the Buckling of Orthotropic Plates , 1999 .

[837]  Maurice Petyt,et al.  Geometrical non-linear, steady state, forced, periodic vibration of plates, Part I: Model and convergence studies , 1999 .

[838]  P. Boisse,et al.  NON-LINEAR DYNAMIC STABILITY ANALYSIS OF COMPOSITE LAMINATES UNDER PERIODIC IN-PLANE COMPRESSIVE LOADS , 1999 .

[839]  G. Galletly.  Elastic buckling of complete toroidal shells of elliptical cross-section subjected to uniform internal pressure , 1998 .

[840]  Y. Frostig,et al.  Closed-Form High-Order Analysis of RC Beams Strengthened with FRP Strips , 2000 .

[841]  Karl Grosh,et al.  Dynamic Response of Complex Structural Intersections Using Hybrid Methods , 1999 .

[842]  M. Yamashita,et al.  Chaotic behavior of an elastoplastic bar in tensile test over a wide range of strain rate: a numerical investigation , 2000 .

[843]  Mark A. Bradford.  Elastic distortional buckling of tee-section cantilevers , 1999 .

[844]  Daniel Berggren,et al.  Experimental Validation of Nonlinear Shell Structural Dynamics , 2001 .

[845]  Charles Wang Wai Ng,et al.  Stress and Displacement around an Elastic Artificial Rectangular Hole , 2001 .

[846]  Y. Başar,et al.  Large inelastic strain analysis by multilayer shell elements , 2000 .

[847]  M. Malinen.  On the classical shell model underlying bilinear degenerated shell finite elements , 2001 .

[848]  Giorgio Monti,et al.  REINFORCED CONCRETE FIBER BEAM ELEMENT WITH BOND-SLIP , 2000 .

[849]  Zdenek P. Bazant,et al.  Size Effect in Concrete Columns: Finite-Element Analysis with Microplane Model , 2001 .

[850]  W. Smoleński.  Statically and kinematically exact nonlinear theory of rods and its numerical verification , 1999 .

[851]  Nils-Erik Wiberg,et al.  Error estimation and h-adaptivity for eigenfrequency analysis of plates in bending: numerical results , 2000 .

[852]  Ji-Hwan Kim,et al.  Dynamic Stability of Rectangular Plates Subjected to Pulsating Follower Forces , 2000 .

[853]  T. U. Ahmed,et al.  Elasto-plastic response of free–free beams subjected to impact loads , 2001 .

[854]  Walter Krenkel,et al.  Design of High Preformance CMC Brake Discs , 1998 .

[855]  K. Barrett,et al.  Explicit eight—noded quandrilateral elements , 1999 .

[856]  Ohseop Song,et al.  VIBRATION AND STABILITY OF PRETWISTED SPINNING THIN-WALLED COMPOSITE BEAMS FEATURING BENDING–BENDING ELASTIC COUPLING , 2000 .

[857]  G. R. Johnson,et al.  Large-deformation triangular and tetrahedral element formulations for unstructured meshes , 2000 .

[858]  Yehia A. Khulief,et al.  Further results for modal characteristics of rotating tapered Timoshenko beams , 1999 .

[859]  L. Bruschelli,et al.  The Influence of “Shell Behavior” on Load Distribution for Thin-Walled Conical Joints , 2000 .

[860]  U. Shrinivasa,et al.  Eight-node brick, PN340, represents constant stress fields exactly , 2000 .

[861]  R. E. Rossi,et al.  Numerical experiments on a vibrating circular plate of non-uniform thickness and a concentric, inner, circular support , 1999 .

[862]  Tomoshi Miyamura,et al.  Wrinkling on stretched circular membrane under in-plane torsion: , 2000 .

[863]  Kurtuluş Soyluk,et al.  Comparison of asynchronous and stochastic dynamic responses of a cable-stayed bridge , 2000 .

[864]  Zella Kahn-Jetter,et al.  Comparison of Torque Transmitting Shaft Connectivity Using a Trilobe Polygon Connection and an Involute Spline , 2000 .

[865]  Jin-Guang Teng,et al.  Numerical models for nonlinear analysis of elastic shells with eigenmode-affine imperfections , 2001 .

[866]  Jintai Chung,et al.  VIBRATION ANALYSIS OF A NEARLY AXISYMMETRIC SHELL STRUCTURE USING A NEW FINITE RING ELEMENT , 1999 .

[867]  Patrick Paultre,et al.  Dynamic investigation of a hybrid suspension and cable‐stayed bridge , 2000 .

[868]  Yogesh M. Desai,et al.  Simple model for dynamic analysis of cable supported structures , 2001 .

[869]  Etienne Balmes,et al.  Steel/Viscoelastic/Steel Sandwich Shells Computational Methods and Experimental Validations, #167 , 2000 .

[870]  Marie-Anne Erki,et al.  Response of RC Beams Strengthened with CFRP Laminates and Subjected to a High Rate of Loading , 2001 .

[871]  Hamid Zahrouni,et al.  Computing finite rotations of shells by an asymptotic-numerical method , 1999 .

[872]  Joohong Kim,et al.  MODAL ANALYSIS OF THE PASSIVE CONSTRAINED LAYER BEAMS BASED ON SPECTRALLY FORMULATED EXACT NORMAL MODES , 2001 .

[873]  Theodor Krauthammer,et al.  OBSERVED FINITE ELEMENT CAPABILITIES AND LIMITATIONS FROM MULTI-TEAM SIMULATIONS OF THREE CONCRETE SHELL STRUCTURES , 1999 .

[874]  B. Mace,et al.  Energy flow models from finite element analysis , 2000 .

[875]  V. Kuznetsov,et al.  Nonlinear pure bending of toroidal shells of arbitrary cross-section , 2001 .

[876]  Abdul Hamid Sheikh,et al.  Finite Element Analysis of Composite Folded Plates with Elastically Restrained Edges , 1999 .

[877]  Murray J. Clarke,et al.  Plastic-zone analysis of 3D steel frames using beam elements , 1999 .

[878]  Aloisio Ernesto Assan,et al.  Nonlinear analysis of reinforced concrete cylindrical shells , 2000 .

[879]  Min-Ho Kwon,et al.  Three-dimensional finite element analyses of reinforced concrete columns , 2002 .

[880]  C. S. Manohar,et al.  Transient Dynamics of Stochastically Parametered Beams , 2000 .

[881]  K. Simha,et al.  Singularity in rotating orthotropic discs and shells , 2000 .

[882]  A. Houmat.  A SECTOR FOURIER P-ELEMENT FOR FREE VIBRATION ANALYSIS OF SECTORIAL MEMBRANES , 2001 .

[883]  F. Charron,et al.  On the selection of p-version shape functions for plate vibration problems , 2001 .

[884]  P. Raveendranath,et al.  Application of coupled polynomial displacement fields to laminated beam elements , 2000 .

[885]  P. Leevers,et al.  Non-uniform and dynamic torsion of elastic beams Part 2: The double torsion test , 1999 .

[886]  J. Reddy.  On the dynamic behaviour of the Timoshenko beam finite elements , 1999 .

[887]  Gangan Prathap,et al.  Convergence of eigenvalues of a cantilever beam with 8- and 20-node hexahedral elements , 1999 .

[888]  Passive Damping of Spinning Disks , 2000 .

[889]  Xi Zhao,et al.  A HYBRID FINITE ELEMENT FORMULATION FOR MID-FREQUENCY ANALYSIS OF SYSTEMS WITH EXCITATION APPLIED ON SHORT MEMBERS , 2000 .

[890]  Christophe Pierre,et al.  Reduced Order Modeling and Vibration Analysis of Mistuned Bladed Disk Assemblies With Shrouds , 1998 .

[891]  Norman Jones,et al.  Dynamic effects on buckling and energy absorption of cylindrical shells under axial impact , 2001 .

[892]  Franc Kosel,et al.  Buckling of plates with strengthenings , 1999 .

[893]  Y. H. Kim,et al.  A partial assumed strain formulation for triangular solid shell element , 2002 .

[894]  Atilla Özütok,et al.  A functional for shells of arbitrary geometry and a mixed finite element method for parabolic and circular cylindrical shells , 2000 .

[895]  R. Benamar,et al.  AN ASYMPTOTIC-NUMERICAL METHOD FOR LARGE-AMPLITUDE FREE VIBRATIONS OF THIN ELASTIC PLATES , 1999 .

[896]  Romil Tanov,et al.  A nonlinear higher order shear deformation shell element for dynamic explicit analysis: part I. formulation and finite element equations , 2000 .

[897]  A. Combescure,et al.  Spherical elastic–plastic structures under internal explosion: Approximate analytical solutions and applications , 2000 .

[898]  K. Y. Sze,et al.  Predictor–corrector procedures for analysis of laminated plates using standard Mindlin finite element models , 2000 .

[899]  Yl L. Xu,et al.  FULLY COUPLED BUFFETING ANALYSIS OF LONG-SPAN CABLE-SUPPORTED BRIDGES: FORMULATION , 1999 .

[900]  K. Y. Sze,et al.  A Six-Node Pentagonal Assumed Natural Strain Solid-Shell Element , 2001 .

[901]  Buckling of circular, solid and annular plates with an intermediate circular support , 2000 .

[902]  Jian-Xin Gu,et al.  Exact Tangent Stiffness for Imperfect Beam-Column Members , 2000 .

[903]  L Ling,et al.  Finite element technique for design of stub columns , 2000 .

[904]  Development of One-Dimensional Models for Elastic Waves in Heterogeneous Beams , 2000 .

[905]  G. Buchanan,et al.  Frequencies and mode shapes for thick truncated hollow cones , 2001 .

[906]  Jong-Shyong Wu,et al.  A LUMPED-MASS MODEL FOR THE DYNAMIC ANALYSIS OF THE SPATIAL BEAM-LIKE LATTICE GIRDERS , 1999 .

[907]  Honggun Park.  Numerical study on RC flat plates subjected to combined axial and transverse load , 1999 .

[908]  Dewey H. Hodges,et al.  Asymptotic treatment of the trapeze effect in finite element cross-sectional analysis of composite beams , 1999 .

[909]  M.-H. Herman Shen,et al.  PASSIVE VIBRATION SUPPRESSION OF BEAMS AND BLADES USING MAGNETOMECHANICAL COATING , 2001 .

[910]  Ian Flood,et al.  Rapid analysis of externally reinforced concrete beams using neural networks , 2001 .

[911]  M. Mukhopadhyay,et al.  Long-Term Structural Analysis of 3-D Ship Structures Using a New Stiffened Plate Element , 2001 .

[912]  Raymond M. Kolonay,et al.  TURBINE BLADE PROBABILISTIC ANALYSIS USING SEMI-ANALYTICAL SENSITIVITIES , 2001 .

[913]  Sotiris Kellas,et al.  Predicting the impact response of an energy-absorbing composite subfloor beam , 2000 .

[914]  Moon-Young Kim,et al.  Improved formulation for spatial stability and free vibration of thin-walled tapered beams and space frames , 2000 .

[915]  Don Kelly,et al.  Fibre steering for a composite C-beam , 2001 .

[916]  R. C. Averill,et al.  C0 zig-zag finite element for analysis of laminated composite beams , 1999 .

[917]  Maenghyo Cho,et al.  A postprocess method for laminated shells with a doubly curved nine-noded finite element , 2000 .

[918]  Georgios Savaidis,et al.  Elastic–plastic FE analysis of a notched shaft under multiaxial nonproportional synchronous cyclic loading , 2001 .

[919]  P de Buhan,et al.  SHEAR DESIGN OF REINFORCED CONCRETE DEEP BEAMS: A NUMERICAL APPROACH , 1999 .

[920]  K. Ram,et al.  Study of bending of laminated composite shells. Part II: shells with a cutout , 2001 .

[921]  James M. W. Brownjohn,et al.  Dynamic Assessment of Curved Cable-Stayed Bridge by Model Updating , 2000 .

[922]  Peter Gosling,et al.  A bendable finite element for the analysis of flexible cable structures , 2001 .

[923]  Seng-Tjhen Lie,et al.  Moment Resistance of Steel I-Beam to CFT Column Connections , 2001 .

[924]  Eugenio Oñate,et al.  A layer-wise triangle for analysis of laminated composite plates and shells , 1999 .

[925]  Mark W. Hilburger,et al.  Response of composite shells with cutouts to internal pressure and compression loads , 1999 .

[926]  Michel R. Labrosse,et al.  A finite element model for simple straight wire rope strands , 2000 .

[927]  E. Ramm.  From Reissner Plate Theory to Three Dimensions in Large Deformation Shell Analysis , 2000 .

[928]  Sami Pajunen,et al.  Large deflection elasto-plastic analysis of beams using kinematically exact elements , 2000 .

[929]  Clark R. Dohrmann,et al.  Uniform Strain Elements for Three-Node Triangular and Four-Node Tetrahedral Meshes , 1999 .

[930]  Amr M. Baz,et al.  ACTIVE CONSTRAINED LAYER DAMPING OF THIN CYLINDRICAL SHELLS , 2001 .

[931]  Kjell Magne Mathisen,et al.  Superconvergent Patch Recovery for plate problems using statically admissible stress resultant fields , 1999 .

[932]  M. J. Richard,et al.  Natural Frequencies of Rotating Uniform Beams with Coriolis Effects , 2001 .

[933]  K. M. Liew,et al.  Vibration Characteristics of Conical Shell Panels With Three-Dimensional Flexibility , 2000 .

[934]  J. N. Reddy,et al.  Convergence properties and derivative extraction of the superconvergent Timoshenko beam finite element , 2001 .

[935]  H. Hassis.  A finite element formulation for plates with warping , 2000 .

[936]  Fumio Kikuchi,et al.  An improved 4-node quadrilateral plate bending element of the Reissner-Mindlin type , 1999 .

[937]  M. Dauge,et al.  Eigen‐frequencies in thin elastic 3‐D domains and Reissner–Mindlin plate models , 2002 .

[938]  Yong Hyup Kim,et al.  A predictor–corrector method for structural nonlinear analysis , 2001 .

[939]  David B. Bogy,et al.  Numerical simulation of the slider air bearing problem of hard disk drives by two multidimensional upwind residual distribution schemes over unstructured triangular meshes , 2001 .

[940]  C. Felippa.  Customizing the mass and geometric stiffness of plane beam elements by Fourier methods , 2001 .

[941]  Michel Fortin,et al.  Error analysis of mixed finite elements for cylindrical shells , 1997, Adv. Comput. Math..

[942]  M. J. L. van Tooren,et al.  Implementation of bending-torsion coupling in the design of a wind-turbine rotor-blade , 1999 .

[943]  Demetres Briassoulis.  Finite element analysis of a cylindrical silo shell under unsymmetrical pressure distributions , 2000 .

[944]  K. Hsiao,et al.  Dynamic analysis of planar flexible mechanisms by co-rotational formulation , 1991 .

[945]  F. Bussamra,et al.  Three-dimensional hybrid-Trefftz stress elements , 2000 .

[946]  Erian A. Armanios,et al.  Free Vibration of Thin-Walled Closed-Section Composite Beams with Optimum and Near-Optimum Coupling , 1999 .

[947]  Andris Chate,et al.  Determination of elastic constants of glass/epoxy unidirectional laminates by the vibration testing of plates , 1999 .

[948]  C. W. S. To,et al.  Large nonstationary random responses of shell structures with geometrical and material nonlinearities , 2000 .

[950]  R. A. Herring,et al.  The correlation of a steering column F.E. and experimental modal models , 2000 .

[951]  D. Hodges,et al.  Timoshenko-like modeling of initially curved and twisted composite beams with oblique cross sections , 2000 .

[952]  Ugurhan Akyuz,et al.  Stability and asymmetric vibrations of pressurized compressible hyperelastic cylindrical shells , 1999 .

[953]  H. R. Riggs,et al.  Stress recovery and error estimation for shell structures , 2000 .

[954]  Federico M. Mazzolani,et al.  Rotational Capacity of Aluminum Beams under Moment Gradient. II: Numerical Simulations , 1999 .

[955]  Puneet Mahajan,et al.  Adaptive finite element analysis of structures under transient dynamic loading using modal superposition , 1999 .

[956]  Daniel J. Inman,et al.  Model reduction of viscoelastic finite element models , 1999 .

[957]  Arif Masud,et al.  Three-Dimensional Corotational Framework for Elasto-Plastic Analysis of Multilayered Composite Shells , 2000 .

[958]  Rajeev Jain,et al.  Rotating anisotropic disc of uniform strength , 1999 .

[959]  Carol Ann Featherston,et al.  Imperfection sensitivity of flat plates under combined compression and shear , 2001 .

[960]  Bjørn Skallerud,et al.  Nonlinear response of shell structures: effects of plasticity modelling and large rotations , 2001 .

[961]  Soon Suck Jarng,et al.  Out-Of-Plane ESPI Simulation for the Harmonic Vibration of a Thin Right-Angled Plate , 2000 .

[962]  D. Chapelle.  Reliability of finite element methods for thin shells , 2000 .

[963]  E. Sánchez-Palencia,et al.  Anisotropic finite element estimates and local locking for shells : parabolic case , 2001 .

[964]  J. Bonet,et al.  Stability and comparison of different linear tetrahedral formulations for nearly incompressible explicit dynamic applications , 2001 .

[965]  J. Li,et al.  Buckling analysis of rotationally periodic structures using shell element with relative degrees of freedom , 2001 .

[966]  Liang Guo-ping,et al.  Analysis of some stabilized low-order mixed finite element methods for reissner-mindlin plates , 2001 .

[967]  Fumiyasu Kuratani,et al.  Vibration analysis of a circular disk tensioned by rolling using finite element method , 2000 .

[968]  Yuanlin Zhu,et al.  Analysis of thin-walled composite box beam under torsional load without external restraint , 2002 .

[969]  M. Itskov,et al.  Constitutive model and finite element formulation for large strain elasto-plastic analysis of shells , 1999 .

[970]  Sreenivas Alampalli,et al.  New Procedure for Design of End Plates and Base Plates of Cantilevered Traffic Support Structures , 2001 .

[971]  Zhigang Feng,et al.  Transient response analysis of one-dimensional distributed parameter systems , 1999 .

[972]  Jane Liu,et al.  A four-node, shear-deformable shell element developed via explicit Kirchhoff constraints , 2000 .

[973]  Hiroyuki Matsunaga,et al.  VIBRATION AND BUCKLING OF MULTILAYERED COMPOSITE BEAMS ACCORDING TO HIGHER ORDER DEFORMATION THEORIES , 2001 .

[974]  Peter Wriggers,et al.  Finite element concepts for finite elastoplastic strains and isotropic stress response in shells: theoretical and computational analysis , 1999 .

[975]  M Ramaley,et al.  A study on a retrofit of the breakaway cable terminal , 2000 .

[976]  Tinggang Zhang,et al.  An eigen-mode method in kinematic shakedown analysis , 2002 .

[977]  M. Çelik,et al.  Prediction of the elastic plastic behavior of thermoplastic composite laminated plates ([0°/θ°]2) with square hole , 2002 .

[978]  Maurice Petyt,et al.  MULTI-MODAL GEOMETRICAL NON-LINEAR FREE VIBRATION OF FULLY CLAMPED COMPOSITE LAMINATED PLATES , 1999 .

[979]  Miguel Luiz Bucalem,et al.  A mixed formulation for general triangular isoparametric shell elements based on the degenerated solid approach , 2000 .

[980]  S. Im,et al.  Finite element analysis of dynamic response of wrinkling membranes , 1999 .

[981]  A. Muc,et al.  Design of composite plates under cyclic loading , 2000 .

[982]  Maurice Petyt,et al.  Non-linear free vibration of isotropic plates with internal resonance , 2000 .

[983]  Chih-Chen Chang,et al.  AMBIENT VIBRATION OF LONG-SPAN CABLE-STAYED BRIDGE , 2001 .

[984]  N. E. Shanmugam,et al.  Design for openings in equal-angle cold-formed steel stub columns , 2001 .

[985]  Jin Gon Kim,et al.  A higher-order hybrid-mixed harmonic shell-of-revolution element , 2000 .

[986]  Yoon Young Kim,et al.  One-dimensional analysis of thin-walled closed beams having general cross-sections , 2000 .

[987]  Massimo Ruzzene,et al.  Dynamic stability of periodic shells with moving loads , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[988]  Francisco Armero,et al.  On the characterization of localized solutions in inelastic solids: an analysis of wave propagation in a softening bar , 2001 .

[989]  Erdogan Madenci,et al.  A Complex Potential-Variational Method for Stress Analysis of Unsymmetric Laminates With an Elliptical Cutout , 2001 .

[990]  M. Petyt,et al.  Non-linear vibration of composite laminated plates by the hierarchical finite element method , 1999 .

[991]  J. A. Witz,et al.  A parametric study of the post-buckling behaviour of steel plates , 2001 .

[992]  W. Zhang,et al.  Post-buckling analysis of shell and membrane structures by dynamic relaxation method , 2000 .

[993]  B. Jiang,et al.  The least‐squares finite element method in elasticity—Part I: Plane stress or strain with drilling degrees of freedom , 2002 .

[994]  C. V. Ramakrishnan,et al.  Accurate computation of design derivatives for plates and shells under transient dynamic loads , 2000 .

[995]  Roman Lackner,et al.  ADAPTIVE FE ANALYSIS OF RC SHELLS , 2002 .

[996]  J. Bareisis,et al.  Stress State of Multilayer Structural Elements Subjected to Static Loading and Optimization of Laminated Beams and Bars , 2000 .

[997]  E. Providas,et al.  An assessment of two fundamental flat triangular shell elements with drilling rotations , 2000 .

[998]  Odd Sture Hopperstad,et al.  Finite-Element Modeling of Beams under Concentrated Loading , 2001 .

[999]  Torsion of thin-walled composite beams with midplane symmetry , 2001 .

[1000]  B. P. Patel,et al.  Parametric Dynamic Instability Analysis of Laminated Composite Conical Shells , 1999 .

[1001]  Jean Frene,et al.  Influence of Axial Thrust Bearing on the Dynamic Behavior of an Elastic Shaft: Coupling Between the Axial Dynamic Behavior and the Bending Vibrations of a Flexible Shaft , 2001 .

[1002]  S. Chakraborty,et al.  ESTIMATION OF IN-PLANE ELASTIC PARAMETERS AND STIFFENER GEOMETRY OF STIFFENED PLATES , 2000 .

[1003]  Peter Wriggers,et al.  Finite element modeling of orthotropic material behaviour in pneumatic membranes , 2000 .

[1004]  Tai-Yan Kam,et al.  Elastic Constants Identification of Shear Deformable Laminated Composite Plates , 2001 .

[1005]  J. P. Sadler,et al.  A one-pass approach to dynamics of high-speed machinery through three-node lagrangian beam elements , 1999 .

[1006]  Xiaodong Wang,et al.  NUMERICAL ANALYSIS OF MOVING ORTHOTROPIC THIN PLATES , 1999 .

[1007]  R. Hauptmann,et al.  `Solid-shell' elements with linear and quadratic shape functions at large deformations with nearly incompressible materials , 2001 .

[1008]  N. E. Shanmugam,et al.  Experimental study on steel-concrete composite beams curved in plan , 2000 .

[1009]  Edward C. Smith,et al.  Experimental and Theoretical Correlation of Helicopter Rotor Blade-Droop Stop Impacts , 1999 .

[1010]  S. Reese,et al.  A new locking-free brick element technique for large deformation problems in elasticity ☆ , 2000 .

[1011]  Anders Eriksson,et al.  Numerical analysis of complex instability behaviour using incremental-iterative strategies , 1999 .

[1012]  R. Palaninathan,et al.  Free vibration of skew laminates , 1999 .

[1013]  Josep Sarrate,et al.  Adaptive finite element strategies based on error assessment , 1999 .

[1014]  Eli Livne,et al.  Nonlinear Equivalent Plate Modeling of Wing-Box Structures , 1999 .

[1015]  J. Batoz,et al.  Formulation and evaluation of new triangular, quadrilateral, pentagonal and hexagonal discrete Kirchhoff plate/shell elements , 2001 .

[1016]  B. Michalak.  The Meso-Shape Functions for the Meso-Structural Models of Wavy-Plates , 2001 .

[1018]  Yang-Cheng Wang.  Number of Cable Effects on Buckling Analysis of Cable-Stayed Bridges , 1999 .

[1019]  A variationally consistent generalized variable formulation for enhanced strain finite elements , 2000 .

[1020]  J. L. Henshall,et al.  Torsion-extension coupling in initially twisted beams by finite elements , 2001 .

[1021]  Peter Möller,et al.  Load Identification Through Structural Modification , 1999 .

[1022]  G. Curti,et al.  On the influence of friction in the calculation of conical disk springs , 1999 .

[1024]  E. Barkanov,et al.  Transient response of sandwich viscoelastic beams, plates, and shells under impulse loading , 2000 .

[1025]  K. Wiśniewski,et al.  Kinematics of finite rotation shells with in-plane twist parameter , 2000 .

[1026]  Ai Kah Soh,et al.  Development of a new quadrilateral thin plate element using area coordinates , 2000 .

[1027]  V N Skopinsky,et al.  Theoretical analysis of composite shell intersections , 1999 .

[1028]  António J.M. Ferreira,et al.  Non-linear analysis of sandwich shells: the effect of core plasticity , 2000 .

[1029]  Holm Altenbach,et al.  Free Damped Vibrations of Sandwich Shells of Revolution , 2001 .

[1030]  J. W. Fash,et al.  Effect of Geometry on Thermoelastic Instability in Disk Brakes and Clutches , 1999 .

[1031]  Jean-Claude Piedboeuf,et al.  Efficient simulation of a multilayer viscoelastic beam using an equivalent homogeneous beam , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[1032]  Richard Curran,et al.  Structural-Aerodynamic Coupling For Wells Turbine Blades , 1999 .

[1033]  Aaron Lee Adler,et al.  Finite element approaches for static and dynamic analysis of partially wrinkled membrane structures , 2000 .

[1034]  N. E. Shanmugam,et al.  Design formula for axially compressed perforated plates , 1999 .

[1035]  Erwan Verron,et al.  Dynamic inflation of non‐linear elastic and viscoelastic rubber‐like membranes , 2001 .

[1036]  Wei Wang,et al.  Behavior of FRP Jacketed Concrete Columns under Eccentric Loading , 2001 .

[1037]  D. Russell,et al.  A superconvergent method for approximating the bending moment of elastic beams with hysteresis damping , 2001 .

[1038]  Ai Kah Soh.  Development of special finite elements for free boundaries , 1999 .

[1039]  Anthony N. Palazotto,et al.  Finite Element Formulation for Thick Sandwich Plates on an Elastic Foundation , 2002 .

[1040]  On the three-dimensional stability loss problem of the viscoelastic composite plate , 2001 .

[1041]  Ricardo G. Durán,et al.  Approximation of the vibration modes of a plate by Reissner-Mindlin equations , 1999, Math. Comput..

[1042]  Chen Wanji,et al.  Stability analysis of cylindrical shells using refined non-conforming rectangular cylindrical shell elements , 2001 .

[1043]  B. P. Patel,et al.  Torsional Vibration and Damping Analysis of Sandwich Beams , 1999 .

[1044]  Adnan Ibrahimbegovic,et al.  Nonlinear dynamics of flexible beams in planar motion: formulation and time-stepping scheme for stiff problems , 1999 .

[1045]  B. Lee,et al.  An effective finite rotation formulation for geometrical non-linear shell structures , 2001 .