Preparation of SiCf/SiC composites by the slip infiltration and transient eutectoid (SITE) process

Abstract A novel ceramic processing route “SITE”, composed of ceramic slip infiltration in a SiC-fibre preform and the low-temperature sintering of a SiC-based matrix using a transient eutectoid, has been introduced as an optional way of producing low-activation, SiC-based, ceramic-matrix composites for fusion applications. The matrix material’s composition was developed on the basis of sintering studies using submicron and nanosized SiC powders and various low-activation precursors for the transient eutectoid secondary phase. Three different compositions of the secondary phase were investigated: SiO 2 –Y 2 O 3 –P 2 O 5 , SiO 2 –MgO–P 2 O 5 and SiO 2 –Al 2 O 3 –P 2 O 5 . The last of these resulted in the most promising material, which was obtained by sintering in controlled atmospheres at temperatures up to 1400 °C, where the SiC-fibres were prevented from losing their original properties. The matrix-material samples were characterised for their phase compositions. The SiC-fibre preform was infiltrated with the matrix material by using electrophoretic deposition. A stable and well-dispersed aqueous suspension enabled the efficient infiltration and preparation of a SiC f /SiC composite with a relatively high density. The simple and rapid SITE processing technique appears to offer a viable, low-cost alternative to the methods presently used to produce low-activation SiC f /SiC composites.