FATIGUE DAMAGE ASSESSMENT OF METAL SANDWICH PANELS UNDER FOUR-POINT BENDING CYCLIC LOADING CONDITIONS

[1]  M. K. Faidzi,et al.  Computational Fatigue Failure Analysis of Magnesium Alloy Core Structure inside the Metal Sandwich Panels under Constant Spectrum Loadings , 2022, Engineering Failure Analysis.

[2]  C. Bellini,et al.  Titanium lattice structures manufactured by EBM process: effect of skin material on bending characteristics , 2021, Engineering Fracture Mechanics.

[3]  E. Lindgaard,et al.  Transient delamination growth in GFRP laminates with fibre bridging under variable amplitude loading in G-control , 2021, Composites Part B: Engineering.

[4]  A. H. Azman,et al.  Computational analysis on the different core configurations for metal sandwich panel under high velocity impact , 2021, Soft Computing.

[5]  R. Pawliczek,et al.  Investigation of Changes in Fatigue Damage Caused by Mean Load under Block Loading Conditions , 2021, Materials.

[6]  M. K. Faidzi,et al.  Evaluating an adhesive effect on core surface configuration for sandwich panel with peel simulation approach , 2021, Journal of Mechanical Science and Technology.

[7]  A. H. Azman,et al.  Review of current trends for metal-based sandwich panel: Failure mechanisms and their contribution factors , 2021 .

[8]  David Chelidze,et al.  Fatigue Life Estimation of Structures under Statistically and Spectrally Similar Variable Amplitude Loading , 2021, 2104.12605.

[9]  Rostislav Chudoba,et al.  Experimental and theoretical evidence for the load sequence effect in the compressive fatigue behavior of concrete , 2021, Materials and Structures.

[10]  Kris Hectors,et al.  Cumulative Damage and Life Prediction Models for High-Cycle Fatigue of Metals: A Review , 2021, Metals.

[11]  Huanxiong Xia,et al.  Effects of surface treatment and adhesive thickness on the shear strength of precision bonded joints , 2021 .

[12]  F. Šiška,et al.  Effect of residual stresses to the crack path in alumina/zirconia laminates , 2020 .

[13]  Nabil M. Chowdhury,et al.  Using a residual strength model to predict mode II delamination failure of composite materials under block fatigue loading , 2020, International Journal of Fatigue.

[14]  S. M. Zebarjad,et al.  High-velocity perforation behaviour of sandwich panels with Al/SiCp composite foam core , 2020, Journal of Composite Materials.

[15]  A. D’Amore,et al.  A method to predict the fatigue life and the residual strength of composite materials subjected to variable amplitude (VA) loadings , 2019, Composite Structures.

[16]  Enling Tang,et al.  Experimental research on damage characteristics of CFRP/aluminum foam sandwich structure subjected to high velocity impact , 2019, Journal of Materials Research and Technology.

[17]  A. Neville,et al.  A numerical model for calculation of the restitution coefficient of elastic-perfectly plastic and adhesive bodies with rough surfaces , 2019, Powder Technology.

[18]  D. Saletti,et al.  Identification of the Quasi-Static and Dynamic Behaviour of Projectile-Core Steel by Using Shear-Compression Specimens , 2019, Metals.

[19]  G. Demelio,et al.  A note on the effect of surface topography on adhesion of hard elastic rough bodies with low surface energy , 2019, Journal of the Mechanical Behavior of Materials.

[20]  Q. Qin,et al.  Dynamic response of double-layer rectangular sandwich plates with metal foam cores subjected to blast loading , 2018, International Journal of Impact Engineering.

[21]  M. Z. Omar,et al.  Ballistic Limit of Laminated Panels with Different Joining Materials Subjected to Steel-Hardened Core Projectile , 2018, International Journal of Integrated Engineering.

[22]  M. Z. Omar,et al.  Experimental and Numerical Investigation on the Layering Configuration Effect to the Laminated Aluminium/Steel Panel Subjected to High Speed Impact Test , 2018, Metals.

[23]  R. Carbas,et al.  Fatigue resistance of an aluminium one-component polyurethane adhesive joint for the automotive industry: Effect of surface roughness and adhesive thickness , 2018, International Journal of Adhesion and Adhesives.

[24]  H. Remes,et al.  Fatigue strength of welded and high frequency mechanical impact (HFMI) post-treated steel joints under constant and variable amplitude loading , 2018 .

[25]  K. Tan,et al.  Impact damage of composite sandwich structures in arctic condition , 2018 .

[26]  Dimitrios G. Pavlou,et al.  The theory of the S-N fatigue damage envelope: Generalization of linear, double-linear, and non-linear fatigue damage models , 2018 .

[27]  Yiqun Liu,et al.  Strength, stiffness, and panel peeling strength of carbon fiber-reinforced composite sandwich structures with aluminum honeycomb cores for vehicle body , 2018 .

[28]  Jian Xiong,et al.  Shear and bending performance of new type enhanced lattice truss structures , 2017 .

[29]  Maoyuan Li,et al.  Effect of surface roughness on interlaminar peel and shear strength of CFRP/Mg laminates , 2017 .

[30]  Emanoil Linul,et al.  Quasi-static compressive behavior of the ex-situ aluminum-alloy foam-filled tubes under elevated temperature conditions , 2017 .

[31]  I. Adarraga,et al.  New correction terms concerning three-point and four-point bending tests , 2016 .

[32]  Kamarul Ariffin Zakaria,et al.  A Review of the loading sequence effects on the fatigue life behaviour of metallic materials , 2016 .

[33]  M. S. Risby,et al.  Improvement of high velocity impact performance of carbon nanotube and lead reinforced magnesium alloy , 2016 .

[34]  Norbert Theil,et al.  Fatigue life prediction method for the practical engineering use taking in account the effect of the overload blocks , 2016 .

[35]  Nikolaos D. Batsoulas,et al.  Cumulative Fatigue Damage: CDM‐Based Engineering Rule and Life Prediction Aspect , 2016 .

[36]  S. M. Ahmadi,et al.  Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials. , 2015, Journal of the mechanical behavior of biomedical materials.

[37]  Khaled Galal,et al.  A fatigue stress-life damage accumulation model for variable amplitude fatigue loading based on virtual target life , 2013 .

[38]  A. K. Vasudevan,et al.  Fatigue of 7075-T651 aluminum alloy under constant and variable amplitude loadings , 2009 .

[39]  Qing Li,et al.  Energy absorption mechanics and design optimization of CFRP/aluminium hybrid structures for transverse loading , 2019, International Journal of Mechanical Sciences.

[40]  B. Vijaya Ramnath,et al.  A REVIEW ON SANDWICH COMPOSITES AND THEIR ADVANCEMENTS , 2019, Materials Today: Proceedings.

[41]  Jung-Seok Kim,et al.  The next generation material for lightweight railway car body structures: Magnesium alloys , 2018 .

[42]  L.F.M. da Silva,et al.  An updated review of adhesively bonded joints in composite materials , 2017 .