A Refined Zigzag Beam Theory for Composite and Sandwich Beams

A new refined theory for laminated composite and sandwich beams that contains the kinematics of the Timoshenko Beam Theory as a proper baseline subset is presented. This variationally consistent theory is derived from the virtual work principle and employs a novel piecewise linear zigzag function that provides a more realistic representation of the deformation states of transverse-shear flexible beams than other similar theories. This new zigzag function is unique in that it vanishes at the top and bottom bounding surfaces of a beam. The formulation does not enforce continuity of the transverse shear stress across the beam's cross-section, yet is robust. Two major shortcomings that are inherent in the previous zigzag theories, shear-force inconsistency and difficulties in simulating clamped boundary conditions, and that have greatly limited the utility of these previous theories are discussed in detail. An approach that has successfully resolved these shortcomings is presented herein. Exact solutions for simply supported and cantilevered beams subject to static loads are derived and the improved modelling capability of the new `zigzag' beam theory is demonstrated. In particular, extensive results for thick beams with highly heterogeneous material lay-ups are discussed and compared with corresponding results obtained from elasticity solutions, two other `zigzag' theories, and high-fidelity finite element analyses. Comparisons with the baseline Timoshenko Beam Theory are also presented. The comparisons clearly show the improved accuracy of the new, refined `zigzag' theory presented herein over similar existing theories. This new theory can be readily extended to plate and shell structures, and should be useful for obtaining relatively low-cost, accurate estimates of structural response needed to design an important class of high-performance aerospace structures.

[1]  R. D. Mindlin,et al.  Influence of rotary inertia and shear on flexural motions of isotropic, elastic plates , 1951 .

[2]  M. D. Sciuva.  Evaluation of some multilayered, shear-deformable plate elements , 1985 .

[3]  K. Bhaskar,et al.  Analytical solutions for flexure of clamped rectangular cross-ply plates using an accurate zig–zag type higher-order theory , 2006 .

[4]  Hidenori Murakami,et al.  Laminated Composite Plate Theory With Improved In-Plane Responses , 1986 .

[5]  Marco Di Sciuva,et al.  Development of an anisotropic, multilayered, shear-deformable rectangular plate element , 1985 .

[6]  N. Pagano,et al.  Exact Solutions for Composite Laminates in Cylindrical Bending , 1969 .

[7]  Marco Di Sciuva,et al.  A refined transverse shear deformation theory for multilayered anisotropic plates. , 1984 .

[8]  S. A. Ambartsumyan,et al.  Theory of anisotropic shells , 1964 .

[9]  Ronald C. Averill,et al.  Static and dynamic response of moderately thick laminated beams with damage , 1994 .

[10]  M. Gherlone,et al.  Refinement of Timoshenko Beam Theory for Composite and Sandwich Beams Using Zigzag Kinematics , 2007 .

[11]  C. Sun,et al.  Theories for the Dynamic Response of Laminated Plates , 1973 .

[12]  Marco Di Sciuva.  A refinement of the transverse shear deformation theory for multilayered of orthotropic plates , 1983 .

[13]  J. Z. Zhu,et al.  The finite element method , 1977 .

[14]  M Discuiva.  AN IMPROVED SHEAR DEFORMATION THEORY FOR MODERATELY THICK MULTILAYERED ANISOTROPIC SHELLS AND PLATES , 1987 .

[15]  E. Reissner.  The effect of transverse shear deformation on the bending of elastic plates , 1945 .

[16]  M. D. Sciuva,et al.  BENDING, VIBRATION AND BUCKLING OF SIMPLY SUPPORTED THICK MULTILAYERED ORTHOTROPIC PLATES: AN EVALUATION OF A NEW DISPLACEMENT MODEL , 1986 .

[17]  Ronald C. Averill,et al.  Development of simple, robust finite elements based on refined theories for thick laminated beams , 1996 .

[18]  Marco Di Sciuva,et al.  Multilayered anisotropic plate models with continuous interlaminar stresses , 1992 .

[19]  L. Librescu,et al.  Implications of damaged interfaces and of other non-classical effects on the load carrying capacity of multilayered composite shallow shells , 2002 .

[20]  S. Timoshenko,et al.  LXVI. On the correction for shear of the differential equation for transverse vibrations of prismatic bars , 1921 .

[21]  Dahsin Liu,et al.  An Overall View of Laminate Theories Based on Displacement Hypothesis , 1996 .