Wireless Pacing Using an Asynchronous Three-Tiered Inductive Power Transfer System

Despite numerous advancements in pacemaker technology for the treatment of cardiac arrhythmias and conduction disorders, lead-related complications associated with these devices continue to compromise patient safety and survival. In this work, we present a system architecture that has the capacity to deliver power to a wireless, batteryless intravascular pacer. This was made possible through a three-tiered, dual-sub-system, four-coil design, which operates on two different frequencies through intermittent remote-controlled inductive power transfer. System efficiency was enhanced using coil design optimization, and validated using numerical simulations and experimental analysis. Our pacemaker design was concepted to achieve inductive power transfer over a 55 mm range to a microscale pacer with a 3 mm diameter. Thus, the proposed system design enabled long-range wireless power transfer to a small implanted pacer with the capacity for intravascular deployment to the anterior cardiac vein. This proposed stent-like fixation mechanism can bypass the multitude of complications associated with pacemaker wires while wireless power can eliminate the need for repeated procedures for battery replacement.

[1]  Miko Elwenspoek,et al.  Characterization of a planar microcoil for implantable microsystems , 1997 .

[2]  Mario J. Garcia,et al.  Evaluation of Coronary Venous Anatomy by Multislice Computed Tomography , 2012 .

[3]  V. G. Welsby,et al.  The theory and design of inductance coils , 1950 .

[4]  Yang Zou,et al.  Symbiotic cardiac pacemaker , 2019, Nature Communications.

[5]  K. Najafi,et al.  A wireless single-chip telemetry-powered neural stimulation system , 1999, 1999 IEEE International Solid-State Circuits Conference. Digest of Technical Papers. ISSCC. First Edition (Cat. No.99CH36278).

[6]  Chang Kyu Jeong,et al.  Self‐Powered Cardiac Pacemaker Enabled by Flexible Single Crystalline PMN‐PT Piezoelectric Energy Harvester , 2014, Advanced materials.

[7]  Daniel J. Inman,et al.  Powering pacemakers from heartbeat vibrations using linear and nonlinear energy harvesters , 2012 .

[8]  Stavros Koulouridis,et al.  Sub-1 GHz far-field powering of implantable medical devices: Design and safety considerations , 2015, 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting.

[9]  Ada S. Y. Poon,et al.  Conformal phased surfaces for wireless powering of bioelectronic microdevices , 2017, Nature Biomedical Engineering.

[10]  Valerie M. Thomas,et al.  Optimization of inductive RFID technology , 2001, Proceedings of the 2001 IEEE International Symposium on Electronics and the Environment. 2001 IEEE ISEE (Cat. No.01CH37190).

[11]  Human Exposure to Radiofrequency Electromagnetic Fields , 2020 .

[12]  Charles R. Sullivan,et al.  An improved calculation of proximity-effect loss in high-frequency windings of round conductors , 2003, IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..

[13]  Haran Burri,et al.  State of the art of leadless pacing , 2015, Europace : European pacing, arrhythmias, and cardiac electrophysiology : journal of the working groups on cardiac pacing, arrhythmias, and cardiac cellular electrophysiology of the European Society of Cardiology.

[14]  Kim-Lien Nguyen,et al.  Inductively powered wireless pacing via a miniature pacemaker and remote stimulation control system , 2017, Scientific Reports.

[15]  Klaus Finkenzeller,et al.  Rfid Handbook: Fundamentals and Applications in Contactless Smart Cards and Identification , 2003 .

[16]  Angelo Auricchio,et al.  First-in-man implantation of leadless ultrasound-based cardiac stimulation pacing system: novel endocardial left ventricular resynchronization therapy in heart failure patients. , 2013, Europace : European pacing, arrhythmias, and cardiac electrophysiology : journal of the working groups on cardiac pacing, arrhythmias, and cardiac cellular electrophysiology of the European Society of Cardiology.

[17]  W.J. Heetderks,et al.  RF powering of millimeter- and submillimeter-sized neural prosthetic implants , 1988, IEEE Transactions on Biomedical Engineering.

[18]  Hussnain Ali,et al.  Inductive link design for medical implants , 2009, 2009 IEEE Symposium on Industrial Electronics & Applications.

[19]  Giuseppina Monti,et al.  Experimental Characterization of a 434 MHz Wireless Energy Link for Medical Applications , 2012 .

[20]  Yuji Tanabe,et al.  Wireless power transfer to deep-tissue microimplants , 2014, Proceedings of the National Academy of Sciences.

[21]  David Blaauw,et al.  24.3 An implantable 64nW ECG-monitoring mixed-signal SoC for arrhythmia diagnosis , 2014, 2014 IEEE International Solid-State Circuits Conference Digest of Technical Papers (ISSCC).

[22]  Maysam Ghovanloo,et al.  Design and Optimization of a 3-Coil Inductive Link for Efficient Wireless Power Transmission , 2011, IEEE Transactions on Biomedical Circuits and Systems.

[23]  S. Jang,et al.  Appropriate Depth of Needle Insertion During Rhomboid Major Trigger Point Block , 2014, Annals of rehabilitation medicine.

[24]  Maysam Ghovanloo,et al.  Design and Optimization of Printed Spiral Coils for Efficient Transcutaneous Inductive Power Transmission , 2007, IEEE Transactions on Biomedical Circuits and Systems.

[25]  Frederick Warren Grover,et al.  Inductance Calculations: Working Formulas and Tables , 1981 .

[26]  O. Gandhi,et al.  Magnetic resonance imaging: calculation of rates of energy absorption by a human-torso model. , 1990, Bioelectromagnetics.

[27]  Zhen Zhang,et al.  Energy Encryption for Wireless Power Transfer , 2015, IEEE Transactions on Power Electronics.

[28]  M. Soljačić,et al.  Wireless Power Transfer via Strongly Coupled Magnetic Resonances , 2007, Science.

[29]  Maysam Ghovanloo,et al.  A Power-Efficient Wireless Capacitor Charging System Through an Inductive Link , 2013, IEEE Transactions on Circuits and Systems II: Express Briefs.

[30]  Shahriar Mirabbasi,et al.  Design and Optimization of Resonance-Based Efficient Wireless Power Delivery Systems for Biomedical Implants , 2011, IEEE Transactions on Biomedical Circuits and Systems.

[31]  J. S. Ho,et al.  Wireless power transfer to a cardiac implant , 2012 .

[32]  L. Leija,et al.  ASIC-based batteryless implantable telemetry microsystem for recording purposes , 1997, Proceedings of the 19th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. 'Magnificent Milestones and Emerging Opportunities in Medical Engineering' (Cat. No.97CH36136).

[33]  Jagmeet P. Singh,et al.  Leadless pacemakers: leading us into the future? , 2015, European heart journal.

[34]  You-Yin Chen,et al.  A Programmable Implantable Microstimulator SoC With Wireless Telemetry: Application in Closed-Loop Endocardial Stimulation for Cardiac Pacemaker , 2011, IEEE Transactions on Biomedical Circuits and Systems.

[35]  Maysam Ghovanloo,et al.  A Triple-Loop Inductive Power Transmission System for Biomedical Applications , 2016, IEEE Transactions on Biomedical Circuits and Systems.

[36]  P. R. Troyk,et al.  Injectable microstimulator for functional electrical stimulation , 1991, Medical and Biological Engineering and Computing.

[37]  Chi-Ying Tsui,et al.  A 13.56 MHz Wireless Power Transfer System With Reconfigurable Resonant Regulating Rectifier and Wireless Power Control for Implantable Medical Devices , 2015, IEEE Journal of Solid-State Circuits.

[38]  Wenxing Zhong,et al.  General Analysis on the Use of Tesla's Resonators in Domino Forms for Wireless Power Transfer , 2013, IEEE Transactions on Industrial Electronics.

[39]  Li Zhou,et al.  Design and Testing of a Transcutaneous RF Recharging System for a Fetal Micropacemaker , 2017, IEEE Transactions on Biomedical Circuits and Systems.

[40]  Karel G M Moons,et al.  Incidence and predictors of short- and long-term complications in pacemaker therapy: the FOLLOWPACE study. , 2012, Heart rhythm.

[41]  L.S.Y. Wong,et al.  A very low-power CMOS mixed-signal IC for implantable pacemaker applications , 2004, IEEE Journal of Solid-State Circuits.