Method for radial vibration modelling in switched reluctance motor

The wide application of switched reluctance motor has been limited due to its high acoustic noise, which is mainly caused by radial vibration. In this study, a new radial vibration model is proposed consisting of vibration acceleration impulse model and natural oscillation model. The vibration acceleration impulse model is developed based on the measured sample data using least-square support vector machine method. Natural oscillation model is also proposed based on the superposition of each frequency, which is obtained by finite element method. The vibration model is built up in MATLAB/Simulink and various experiments have been conducted to verify the accuracy of the proposed model.

[1]  R. S. Girgis,et al.  Method for accurate determination of resonant frequencies and vibration behaviour of stators of electrical machines , 1981 .

[2]  Zaiping Pan,et al.  Analytical Model for Predicting Maximum Reduction Levels of Vibration and Noise in Switched Reluctance Machine by Active Vibration Cancellation , 2011, IEEE Transactions on Energy Conversion.

[3]  Ali Emadi,et al.  An Offline Torque Sharing Function for Torque Ripple Reduction in Switched Reluctance Motor Drives , 2015, IEEE Transactions on Energy Conversion.

[4]  Rik W. De Doncker,et al.  Calculation of the Acoustic Noise Spectrum of SRM Using Modal Superposition , 2010, IEEE Transactions on Industrial Electronics.

[5]  Babak Fahimi,et al.  Prediction of Radial Vibration in Switched Reluctance Machines , 2013, IEEE Transactions on Energy Conversion.

[6]  Ebrahim Afjei,et al.  Unbalanced Magnetic Force Mitigation and Torque Ripple Reduction in Eccentric Switched Reluctance Motors Using Flux Leakages , 2015 .

[7]  Pragasen Pillay,et al.  Resonant frequencies and mode shapes of switched reluctance motors , 2001 .

[8]  Jeffrey H. Lang,et al.  The origin and reduction of acoustic noise in doubly salient variable-reluctance motors , 1992 .

[9]  R. W. De Doncker,et al.  Control for Polyphase Switched Reluctance Machines to Minimize Torque Ripple and Decrease Ohmic Machine Losses , 2012, IEEE Transactions on Power Electronics.

[10]  Tim C. O'Connell,et al.  A Lumped-Parameter Off-Axis-Capable Dynamic Switched Reluctance Machine Model Including Unbalanced Radial Forces , 2015, IEEE Transactions on Energy Conversion.

[11]  D. Howe,et al.  Vibration behaviour of stators of switched reluctance motors , 2001 .

[12]  Iqbal Husain,et al.  Four-Quadrant Torque Ripple Minimization of Switched Reluctance Machine Through Current Profiling With Mitigation of Rotor Eccentricity Problem and Sensor Errors , 2015 .