Experimental investigation of laser cladding of H13 hot work steel by Stellite 6 powder

[1]  X.H. Wang,et al.  Microstructure and properties of ceramic particle reinforced FeCoNiCrMnTi high entropy alloy laser cladding coating , 2022, Intermetallics.

[2]  Yufeng Wu,et al.  Process parameter optimization and EBSD analysis of Ni60A-25% WC laser cladding , 2021 .

[3]  H. Li,et al.  Effect of metallurgical behavior on microstructure and properties of FeCrMoMn coatings prepared by high-speed laser cladding , 2021 .

[4]  S. Bruschi,et al.  On the influence of laser cladding parameters and number of deposited layers on as-built and machined AISI H13 tool steel multilayered claddings , 2021 .

[5]  N. Guo,et al.  Investigation on in-situ laser cladding 5356 aluminum alloy coating on 5052 aluminum alloy substrate in water environment , 2021, Journal of Materials Research and Technology.

[6]  A. Nath,et al.  High-temperature abrasive wear characteristics of H13 steel modified by laser remelting and cladded with Stellite 6 and Stellite 6/30% WC , 2021 .

[7]  Muvvala Gopinath,et al.  A lumped parametric analytical model for predicting molten pool temperature and clad geometry in pre-placed powder laser cladding , 2021, Optik.

[8]  K. Luo,et al.  Laser shock wave-induced wear property improvement and formation mechanism of laser cladding Ni25 coating on H13 tool steel , 2021 .

[9]  Hao Liu,et al.  Microstructure and high-temperature wear behaviour of Inconel 625 multi-layer cladding prepared on H13 mould steel by a hybrid additive manufacturing method , 2021 .

[10]  K. Luo,et al.  Effects of Ni25 transitional layer on microstructural evolution and wear property of laser clad composite coating on H13 tool steel , 2020 .

[11]  M. Moradi,et al.  Additive manufacturing of stellite 6 superalloy by direct laser metal deposition – Part 1: Effects of laser power and focal plane position , 2020 .

[12]  A. Nath,et al.  Effect of scan strategy and heat input on the shear strength of laser cladded Stellite 21 layers on AISI H13 tool steel in as-deposited and heat treated conditions , 2020, Surface and Coatings Technology.

[13]  A. Kaplan,et al.  An experimental investigation of the effects of diode laser surface hardening of AISI 410 stainless steel and comparison with furnace hardening heat treatment , 2019, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[14]  Xianghui Xiao,et al.  Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel , 2019, Materials & Design.

[15]  R. Shoja-Razavi,et al.  Microstructure investigation of Inconel 625 coating obtained by laser cladding and TIG cladding methods , 2018, Surface and Coatings Technology.

[16]  Wenyi Yan,et al.  Experimental characterization of laser cladding of CPM 9V on H13 tool steel for die repair applications , 2015 .

[17]  W. Niu,et al.  Microstructure and phase transformations in laser clad CrxSy/Ni coating on H13 steel , 2015 .

[18]  Indranil Manna,et al.  Effect of laser parameters on microstructure and hardness of laser clad and tempered AISI H13 tool steel , 2014 .

[19]  Eyup Bagci,et al.  A study of Taguchi optimization method for identifying optimum surface roughness in CNC face milling of cobalt-based alloy (stellite 6) , 2006 .