Polyvinylpyrrolidone-resorcinol-formaldehyde hydrogel system reinforced with bio-synthesized zinc-oxide for water shut-off in heterogeneous reservoir: An experimental investigation

This work aims at evaluating advancement in water shut-off performance using nanocomposite hydrogel (PVP-ZnO:RF) prepared from PolyVinylPyrrolidone (PVP); used as polymer, Resorcinol-Formaldehyde (RF); used as a crosslinker and nano Zinc Oxide (ZnO); used as strength modifier and it was compared with conventional hydrogel (PVP:RF) i.e., hydrogel without ZnO nanofiller. The ZnO, used as a nanofiller in this work, was successfully bio-synthesized (i.e., green route synthesized) from plant extract (Moringa oleifera leaves) and the average size was found to be 10 nm. In this research work, the effect of ZnO nanofiller on gelation time, gel strength, thermal stability, rheological properties and water shut-off performance was systematically evaluated. On the incorporation of ZnO nanofiller, gelation time decreases but gel strength increases. The thermal stability of hydrogel was studied using a Differential Scanning Calorimeter (DSC) that depicts maximum tolerable temperature increases from 86 °C to 92 °C at 0.5 wt.% of ZnO concentration in nanocomposite hydrogel (PVP). The mechanical stability of the nanocomposite hydrogel (PVP-ZnO:RF) demonstrates that infusion of ZnO nanofiller has significantly enhanced the dynamic moduli (i.e., storage modulus (G′) and loss modulus (G″)). Moreover, the optimum results of storage modulus (G′) and loss modulus (G″) are found at 0.5 wt.% of ZnO nanofiller. The water shut-off performance in the high permeable streak, in terms of percentage reduction in permeability, was 97% and 92% for nanocomposite hydrogel (PVP-ZnO:RF) and conventional hydrogel (PVP:RF), respectively. Also, the residual resistance factor is found to be 31.31 and 12.71 for PVP-ZnO:RF and PVP:RF hydrogels. Thus, the developed nanocomposite hydrogel (PVP-ZnO:RF) may be a promising solution to excessive water production in mature oil fields.

[1]  A. Sultan,et al.  Development of silane-modified colloidal silica pickering emulsion stabilized by organophilic micronized phyllosilicate for conformance control , 2020 .

[2]  V. Mahto,et al.  Reinforced preformed particle gel: Synthesis, characterization and performance evaluation for water shut-off jobs in heterogeneous reservoir , 2020 .

[3]  D. Weiss,et al.  Effect of temperature on gelation and cross-linking of gelatin methacryloyl for biomedical applications , 2020 .

[4]  Reena,et al.  Synthesis and characterization of cross-linked hydrogels using polyvinyl alcohol and polyvinyl pyrrolidone and their blend for water shut-off treatments , 2020, Journal of Molecular Liquids.

[5]  Abha Choubey,et al.  Kinetic and isothermal study of effect of transition metal doping on adsorptive property of zinc oxide nanoparticles synthesized via green route using Moringa oleifera leaf extract , 2020, Materials Research Express.

[6]  A. S. Vorokh,et al.  Estimation of particle size using the Debye equation and the Scherrer formula for polyphasic TiO2 powder , 2019, Journal of Physics: Conference Series.

[7]  Yongchao Xue,et al.  Techniques for improving the water-flooding of oil fields during the high water-cut stage , 2019, Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles.

[8]  V. Mahto,et al.  Development of fly ash reinforced nanocomposite preformed particle gel for the control of excessive water production in the mature oil fields , 2019, Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles.

[9]  E. Alsharaeh,et al.  Enhanced Polyacrylamide Polymer Gels Using Zirconium Hydroxide Nanoparticles for Water Shutoff at High Temperatures: Thermal and Rheological Investigations , 2018, Industrial & Engineering Chemistry Research.

[10]  Hongbin Yang,et al.  Experimental research of high strength thermally stable organic composite polymer gel , 2018, Journal of Molecular Liquids.

[11]  V. Mahto,et al.  Development of a novel fly ash-polyacrylamide nanocomposite gel system for improved recovery of oil from heterogeneous reservoir , 2018, Journal of Petroleum Science and Engineering.

[12]  Jinjie Wang,et al.  Experimental Investigation on the Nanosilica-Reinforcing Polyacrylamide/Polyethylenimine Hydrogel for Water Shutoff Treatment , 2018 .

[13]  S. Ismail,et al.  Crosslinked Polyacrylamide Composite Hydrogels Impregnated with Fly Ash: Synthesis, Characterization and Their Application as Fractures Sealant for High Water Producing Zones in Oil and Gas Wells , 2018, Journal of Polymers and the Environment.

[14]  A. AlSofi,et al.  Development and evaluation of foam-based conformance control for a high-salinity and high-temperature carbonate , 2018, Journal of Petroleum Exploration and Production Technology.

[15]  B. Bai,et al.  Comprehensive review of water shutoff methods for horizontal wells , 2017 .

[16]  K. Alnoaimi,et al.  Novel Compositions Based on Nanomaterials Designed for Use as Conformance Sealants , 2017 .

[17]  V. Gun'ko,et al.  Properties of Water Bound in Hydrogels , 2017, Gels.

[18]  G. Du,et al.  Mechanism of Base-Catalyzed Resorcinol-Formaldehyde and Phenol-Resorcinol-Formaldehyde Condensation Reactions: A Theoretical Study , 2017, Polymers.

[19]  Yining Wu,et al.  Study on a Novel Cross-Linked Polymer Gel Strengthened with Silica Nanoparticles , 2017 .

[20]  Rasha E. El-Mekawy,et al.  Recent trends in smart and flexible three-dimensional cross-linked polymers: synthesis of chitosan-ZnO nanocomposite hydrogels for insulin drug delivery. , 2017, MedChemComm.

[21]  Chengli Zhang,et al.  Formulation Development of High Strength Gel System and Evaluation on Profile Control Performance for High Salinity and Low Permeability Fractured Reservoir , 2017, International journal of analytical chemistry.

[22]  A. Farasat,et al.  Effects of reservoir temperature and water salinity on the swelling ratio performance of enhanced preformed particle gels , 2017, Korean Journal of Chemical Engineering.

[23]  A. AlSofi,et al.  Development and Evaluation of Foam-Based Conformance Control for a High Salinity and High Temperature Carbonate , 2017 .

[24]  J. Parkinson,et al.  Kinetics of early stages of resorcinol-formaldehyde polymerization investigated by solution phase nuclear magnetic resonance spectroscopy , 2017 .

[25]  B. Bai,et al.  Terpolymer Gel System Formed by Resorcinol-Hexamethylenetetramine for Water Management in Extremely High-Temperature Reservoirs , 2017 .

[26]  A. Mohammadi,et al.  Using surface modified clay nanoparticles to improve rheological behavior of Hydrolized Polyacrylamid (HPAM) solution for enhanced oil recovery with polymer flooding , 2016 .

[27]  Caili Dai,et al.  New insights into the hydroquinone (HQ)–hexamethylenetetramine (HMTA) gel system for water shut-off treatment in high temperature reservoirs , 2016 .

[28]  Q. Ren,et al.  Evaluation of polyacrylamide gels with accelerator ammonium salts for water shutoff in ultralow temperature reservoirs: Gelation performance and application recommendations , 2016 .

[29]  Taisheng Wang,et al.  Effect of multiwalled carbon nanotube-grafted polymer brushes on the mechanical and swelling properties of polyacrylamide composite hydrogels , 2016 .

[30]  S. Mallakpour,et al.  The potential use of recycled PET bottle in nanocomposites manufacturing with modified ZnO nanoparticles capped with citric acid: preparation, thermal, and morphological characterization , 2016 .

[31]  S. Ayatollahi,et al.  Smart Technique in Water Shutoff Treatment for a Layered Reservoir through an Engineered Injection/Production Scheme , 2015 .

[32]  Caili Dai,et al.  Experimental study and application of gels formed by nonionic polyacrylamide and phenolic resin for in-depth profile control , 2015 .

[33]  K. Sepehrnoori,et al.  A laboratory and simulation study of preformed particle gels for water conformance control , 2015 .

[34]  Paul Tongwa,et al.  A more superior preformed particle gel with potential application for conformance control in mature oilfields , 2015, Journal of Petroleum Exploration and Production Technology.

[35]  Zhen-quan Li,et al.  Enhanced oil recovery by branched-preformed particle gel injection in parallel-sandpack models , 2014 .

[36]  W. Li,et al.  Microencapsulation of triglycidyl isocyanurate by solvent evaporation method for UV and thermal dual‐cured coatings , 2014 .

[37]  F. Esmaeilzadeh,et al.  Identification and selection of a stable gel polymer to control or reduce water production in gas condensate fields , 2014 .

[38]  K. Sepehrnoori,et al.  A critical review on use of polymer microgels for conformance control purposes , 2014 .

[39]  Sudha,et al.  Effect of Multiwalled Carbon Nanotubes on the Conductivity and Swelling Properties of Porous Polyacrylamide Hydrogels , 2014 .

[40]  Zhao Jianhui,et al.  Adsorption behavior of cocamidopropyl betaine under conditions of high temperature and high salinity , 2014 .

[41]  Peng Liu,et al.  Design of Magnetic Attapulgite/Fly Ash/Poly(acrylic acid) Ternary Nanocomposite Hydrogels and Performance Evaluation as Selective Adsorbent for Pb2+ Ion , 2014 .

[42]  K. Sepehrnoori,et al.  New Experiments and Models for Conformance Control Microgels , 2014 .

[43]  W. Bae,et al.  The Development and Optimization of a Polymer Conformance Control Technology in Mature Reservoirs: Laboratory Experiments vs. Field Scale Simulation , 2014 .

[44]  Ö. Pekcan,et al.  Effect of multiwalled carbon nanotube (MWNT) on the behavior of swelling of polyacrylamide–MWNT composites , 2014 .

[45]  Caili Dai,et al.  The use of environmental scanning electron microscopy for imaging the microstructure of gels for profile control and water shutoff treatments , 2014 .

[46]  Guicai Zhang,et al.  Smart Profile Control by Salt-Reversible Flocculation of Cationic Microgels and Polyacrylamide , 2013 .

[47]  J. Sefcik,et al.  Mechanism and kinetics of nanostructure evolution during early stages of resorcinol-formaldehyde polymerisation. , 2013, Journal of colloid and interface science.

[48]  B. Bai,et al.  Evaluation of a Nanocomposite Hydrogel for Water Shut-Off in Enhanced Oil Recovery Applications: Design, Synthesis, and Characterization , 2013 .

[49]  A. Arsad,et al.  Flow Characteristics and Dynamic Behavior of Polyamide 6/Acrylonitile Butadiene Styrene (PA6/ABS) Blends , 2013 .

[50]  Jianhui Zhao,et al.  Study on formation of gels formed by polymer and zirconium acetate , 2013, Journal of Sol-Gel Science and Technology.

[51]  Joydeep Dutta,et al.  Paper modified with ZnO nanorods – antimicrobial studies , 2012, Beilstein journal of nanotechnology.

[52]  B. Bai,et al.  Effect of Weak Preformed Particle Gel on Unswept Oil Zones/Areas during Conformance Control Treatments , 2012 .

[53]  Turgut Nugay,et al.  High strength poly(acrylamide)-clay hydrogels , 2011 .

[54]  Baojun Bai,et al.  Applied Technologies and Prospects of Conformance Control Treatments in China , 2010 .

[55]  H. Nasr-El-Din,et al.  Gelation Kinetics and Performance Evaluation of an Organically Crosslinked Gel at High Temperature and Pressure , 2008 .

[56]  E. Vasheghani-Farahani,et al.  Effect of montmorillonite on gelation and swelling behavior of sulfonated polyacrylamide nanocomposite hydrogels in electrolyte solutions , 2008 .

[57]  I. Hussein,et al.  A rheological investigation of a high temperature organic gel used for water shut-off treatments , 2007 .

[58]  Limsoon Wong,et al.  Using indirect protein interactions for the prediction of Gene Ontology functions , 2007, BMC Bioinformatics.

[59]  W. Oppermann,et al.  Polyacrylamide-clay nanocomposite hydrogels : Rheological and light scattering characterization , 2007 .

[60]  A. Zaitoun,et al.  Investigation of a Novel Chemical for Bullhead Water Shutoff Treatments , 2005 .

[61]  K. Green,et al.  Water Shutoff in Gas Wells: Proper Gel Placement Is the Key to Success , 2004 .

[62]  H. Al-Anazi,et al.  Use of a pH Sensitive Polymer for Conformance Control , 2002 .

[63]  A. Moradi-araghi A review of thermally stable gels for fluid diversion in petroleum production , 2000 .

[64]  R. D. Sydansk,et al.  Gel conformance treatments increase oil production in Wyoming , 1992 .

[65]  R. Seright Impact of dispersion on gel placement for profile control , 1991 .

[66]  R. D. Sydansk A newly developed chromium(III) gel technology , 1990 .

[67]  J. Schultz,et al.  Stress transfer in single-fibre composites: effect of adhesion, elastic modulus of fibre and matrix, and polymer chain mobility , 1989 .

[68]  J. Langford,et al.  Scherrer after sixty years: a survey and some new results in the determination of crystallite size , 1978 .