2D cross-borehole resistivity tomographies below foundations as a tool to design proper remedial actions in covered karst

Abstract To assess the subsurface conditions beneath a 4-floor public building, where sinkhole collapses had already occurred, twenty-three 2D cross-borehole resistivity tomographies were conducted beneath the building foundations in January and February 2004. The aim of these geophysical investigations was to build a model of the complex subsurface geometry in order to estimate and minimize costs of remediation works. In cross-borehole resistivity tomography standard electrode configurations do not exist yet. Thus, preliminary field tests were performed to determine a suitable combination of arrays and to estimate the stability of these measurements on the site. A combination of cross-borehole arrays and single-hole arrays was then selected. The measures were conducted on each panel using this combination of arrays. Over 2500 apparent resistivities were measured on each panel. The inversion problem was solved within the Res2DInv® software. On tomographies weathered zones were clearly identified as low resistivity zones ( ρ  > 200 Ω m) led to establish a 3D model of the ground conditions. This model showed large variations in buried rockhead depths from 6 to more than 24 m. Four zones of different ranges of depth-to-bedrock were identified inside, which three vertically elongated weathered zones were also delineated. Based on these results, a remediation plan which consisted in underpinning the foundations with about 250 micropiles was designed. The feedback of the remedial works showed that tomographies gave a very accurate overview of the buried rockhead depths (with a precision of about 1 m).

[1]  Zhou Bing,et al.  Cross‐hole resistivity tomography using different electrode configurations , 2000 .

[2]  Hiromasa Shima,et al.  Two-dimensional automatic resistivity inversion technique using alpha centers , 1990 .

[3]  Denys Breysse,et al.  Electrical resistivity borehole measurements: application to an urban tunnel site , 2002 .

[4]  Olivier Kaufmann,et al.  Geohazard map of cover-collapse sinkholes in the ‘Tournaisis’ area, southern Belgium , 2002 .

[5]  Martin G. Culshaw,et al.  Sinkholes and Subsidence: Karst and Cavernous Rocks in Engineering and Construction , 2004 .

[6]  Tom Armour,et al.  Micropile Design and Construction Guidelines: Implementation Manual , 2000 .

[7]  Stephen K. Park,et al.  Inversion of pole-pole data for 3-D resistivity structure beneath arrays of electrodes , 1991 .

[8]  Roelof Versteeg,et al.  Autonomous Monitoring of Fluid Movement Using 3-D Electrical Resistivity Tomography , 2004 .

[9]  Robin Newmark,et al.  Monitoring Carbon Dioxide Floods Using Electrical Resistance Tomography (ERT): Sensitivity Studies , 2003 .

[10]  A. Binley,et al.  Detection of leaks in underground storage tanks using electrical resistance methods. , 1996 .

[11]  Edzer Pebesma,et al.  GSTAT: a program for geostatistical modelling, prediction and simulation , 1998 .

[12]  Abelardo Ramirez,et al.  Electrical imaging of engineered hydraulic barriers , 2000 .

[13]  Jeffrey J. Daniels,et al.  Borehole Resistivity And Electromagnetic Methods Applied to Mineral Exploration , 1984, IEEE Transactions on Geoscience and Remote Sensing.

[14]  D. Oldenburg,et al.  Inversion of geophysical data using an approximate inverse mapping , 1991 .

[15]  Wanfang Zhou,et al.  Effective electrode array in mapping karst hazards in electrical resistivity tomography , 2002 .

[16]  P. Gibson.  APPLICATION OF RESISTIVITY AND MAGNETOMETRY GEOPHYSICAL TECHNIQUES FOR NEAR-SURFACE INVESTIGATIONS IN KARSTIC TERRANES IN IRELAND , 2004 .

[17]  Y. Benderitter,et al.  Shallow karst exploration using MT-VLF and DC resistivity methods1 , 1995 .

[18]  Douglas LaBrecque,et al.  Difference Inversion of ERT Data: a Fast Inversion Method for 3-D In Situ Monitoring , 2001 .

[19]  R. Barker,et al.  Practical techniques for 3D resistivity surveys and data inversion1 , 1996 .

[20]  R. Barker,et al.  Rapid least-squared inversion of apparent resisitivity pseudosections by a quasi-Newton method , 1996 .

[21]  H. Morrison,et al.  Borehole‐to‐surface electrical resistivity monitoring of a salt water injection experiment , 1991 .

[22]  J. Daniels.  Three-Dimensional Resistivity and Induced-Polarization Modeling Using Buried Electrodes , 1977 .

[23]  A. Binley,et al.  Cross-hole electrical imaging of a controlled saline tracer injection , 2000 .

[24]  Douglas LaBrecque,et al.  Monitoring an underground steam injection process using electrical resistance tomography , 1993 .

[25]  F. Šumanovac,et al.  Evaluation of resistivity and seismic methods for hydrogeological mapping in karst terrains , 2001 .

[26]  W. Daily,et al.  Cross-borehole resistivity tomography , 1991 .

[27]  Pitambar Gautam,et al.  Mapping of subsurface karst structure with gamma ray and electrical resistivity profiles: a case study from Pokhara valley, central Nepal , 2000 .