A probabilistic model for the onset of High Cycle Fatigue (HCF) crack propagation: Application to hydroelectric turbine runner

Abstract A fatigue reliability model for hydroelectric turbine runners is presented in this paper. In the proposed model, reliability is defined as the probability of not exceeding a threshold above which HCF contribute to crack propagation. In the context of combined LCF–HCF loading, the Kitagawa diagram is used as the limit state threshold. Two types of crack geometries are investigated: circular surface flaw and embedded flaw in a semi-infinite medium. The accuracy of FORM/SORM approximations was considered acceptable for engineering purpose in our application given the minimal numerical burden posed by such a method compared to Monte Carlo simulations. Our results show that the probability of an embedded flaw close to the surface has a major influence on reliability. Furthermore, we observe that the assumption that crack geometrical characteristics are independent leads to non-conservative results.

[1]  Philippe Bocher,et al.  Impact of startup scheme on Francis runner life expectancy , 2010 .

[2]  Henrik O. Madsen,et al.  Structural Reliability Methods , 1996 .

[3]  P. Johannesson.  Extrapolation of load histories and spectra , 2006 .

[4]  B. E. Powell,et al.  Influence of LCF overloads on combined HCF/LCF crack growth , 2003 .

[5]  J. Pickands.  Statistical Inference Using Extreme Order Statistics , 1975 .

[6]  B. Atzori,et al.  A three-dimensional graphical aid to analyze fatigue crack nucleation and propagation phases under fatigue limit conditions , 2002 .

[7]  Antoine Tahan,et al.  On the stochastic simulation of hydroelectric turbine blades transient response , 2012 .

[8]  Y. Murakami.  Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions , 2002 .

[9]  K. Breitung.  Asymptotic Approximations for Probability Integrals , 1994 .

[10]  H. Döker,et al.  Fatigue Crack Growth Threshold: Implications, Determination and Data Evaluation , 1997 .

[11]  M. Hohenbichler,et al.  Improvement Of Second‐Order Reliability Estimates by Importance Sampling , 1988 .

[12]  Lars Tvedt,et al.  Second Order Reliability by an Exact Integral , 1989 .

[13]  M. E. Haddad,et al.  Prediction of non propagating cracks , 1979 .

[14]  Anne Dutfoy,et al.  Do Rosenblatt and Nataf isoprobabilistic transformations really differ , 2009 .

[15]  Theodore Nicholas,et al.  High Cycle Fatigue: A Mechanics of Materials Perspective , 2006 .

[16]  Michele Ciavarella,et al.  On the possible generalizations of the Kitagawa–Takahashi diagram and of the El Haddad equation to finite life , 2006 .

[17]  Stefano Beretta,et al.  Extreme value models for the assessment of steels containing multiple types of inclusion , 2006 .

[18]  S. Frechinet,et al.  A multiaxial fatigue failure criterion considering the effects of the defects , 2007 .

[19]  Paolo Lazzarin,et al.  Fracture Mechanics and Notch Sensitivity , 2003 .

[20]  Richard L. Smith,et al.  Models for exceedances over high thresholds , 1990 .

[21]  R. Rackwitz.  Reliability analysis—a review and some perspectives , 2001 .