Extreme wave impacts on a wave energy converter: load prediction through a SPH model

ABSTRACT The present work addresses the evaluation by numerical simulation of the extreme loads acting on a flap-type wave energy converter. To this aim, a realistic situation is considered: an extreme wave impacting a bottom-mounted pitching device, consisting of a partly submerged flap, placed in front of a dike on the coast of Bayonne, south-west Atlantic coast, France. The SPH model can be an optimal candidate for this kind of study: its Lagrangian character allows for an accurate description of the extreme breaking wave acting on the structure, while its meshless feature permits an easy interaction of the fluid with moving rigid bodies such as the rotating flap converter. An analysis of the influence of different environmental conditions (tide level, wave breaking occurrence) on the load intensity is performed. Several impact dynamics are studied and it is found that, in some specific conditions, the process develops in a sort of “flip through” impact, similarly to what observed for wave impact on rigid walls. The most critical cases have been also reproduced with a fully 3D SPH model, highlighting the greater complexity of the flow and the limits of the 2D modeling.

[1]  Y. Goda.  A SYNTHESIS OF BREAKER INDICES , 1970 .

[2]  Robert G. Dean,et al.  Water wave mechanics for engineers and scientists , 1983 .

[3]  J. Monaghan.  Simulating Free Surface Flows with SPH , 1994 .

[4]  W. Szymczak.  Energy losses in non-classical free surface flows , 1994 .

[5]  Holger Wendland,et al.  Piecewise polynomial, positive definite and compactly supported radial functions of minimal degree , 1995, Adv. Comput. Math..

[6]  J. Snowdon,et al.  Simulation of , 2002 .

[7]  D. Peregrine.  Water-wave impact on walls , 2003 .

[8]  H. Schäffer,et al.  A discussion of artificial compressibility , 2006 .

[9]  Benedict D. Rogers,et al.  Numerical Modeling of Water Waves with the SPH Method , 2006 .

[10]  G. Oger,et al.  Two-dimensional SPH simulations of wedge water entries , 2006, J. Comput. Phys..

[11]  D. Graham,et al.  Simulation of wave overtopping by an incompressible SPH model , 2006 .

[12]  Salvatore Marrone,et al.  Free-surface flows solved by means of SPH schemes with numerical diffusive terms , 2010, Comput. Phys. Commun..

[13]  O. Kimmoun,et al.  Sloshing And Scaling: Experimental Study In a Wave Canal At Two Different Scales , 2010 .

[14]  Salvatore Marrone,et al.  Fast free-surface detection and level-set function definition in SPH solvers , 2010, J. Comput. Phys..

[15]  A. Colagrossi,et al.  δ-SPH model for simulating violent impact flows , 2011 .

[16]  Aurélien Babarit,et al.  Numerical benchmarking study of a selection of wave energy converters , 2012 .

[17]  Salvatore Marrone,et al.  Propagation of gravity waves through an SPH scheme with numerical diffusive terms , 2011, Comput. Phys. Commun..

[18]  B. Rogers,et al.  GPUs, a New Tool of Acceleration in CFD: Efficiency and Reliability on Smoothed Particle Hydrodynamics Methods , 2011, PloS one.

[19]  Salvatore Marrone,et al.  Numerical diffusive terms in weakly-compressible SPH schemes , 2012, Comput. Phys. Commun..

[20]  A. Colagrossi,et al.  Nonlinear water wave interaction with floating bodies in SPH , 2013 .

[21]  F. Dias,et al.  Two – dimensional and three – dimensional simulation of wave interaction with an Oscillating Wave Surge Converter , 2013 .

[22]  N. Couty,et al.  2D Simulations of Breaking Wave Impacts on a Flat Rigid Wall – Part 1: Influence of the Wave Shape , 2014 .

[23]  Yi-Chih Chow,et al.  Numerical Modeling of Wave-Induced Rotations of a Bottom-Hinged Flapper with a SPH Model , 2014 .

[24]  Benedict D. Rogers,et al.  Numerical predictions of water–air wave slam using incompressible–compressible smoothed particle hydrodynamics , 2015 .

[25]  Stephen M. Longshaw,et al.  DualSPHysics: Open-source parallel CFD solver based on Smoothed Particle Hydrodynamics (SPH) , 2015, Comput. Phys. Commun..

[26]  A. Colagrossi,et al.  Prediction of energy losses in water impacts using incompressible and weakly compressible models , 2015 .

[27]  A. Colagrossi,et al.  Energy balance in the δ-SPH scheme , 2015 .

[28]  A. Colagrossi,et al.  Analysis of free-surface flows through energy considerations: Single-phase versus two-phase modeling. , 2016, Physical review. E.

[29]  Alan Henry,et al.  Wave interaction with an Oscillating Wave Surge Converter. Part II: Slamming☆ , 2016 .

[30]  Abbas Khayyer,et al.  On enhancement of energy conservation properties of projection-based particle methods , 2017 .

[31]  A. Colagrossi,et al.  On the filtering of acoustic components in weakly-compressible SPH simulations , 2017 .

[32]  A. Colagrossi,et al.  Challenges on the numerical prediction of slamming loads on LNG tank insulation panels , 2017 .

[33]  Sarah Gallagher,et al.  Analytical and computational modelling for wave energy systems: the example of oscillating wave surge converters , 2017, Acta Mechanica Sinica.

[34]  A. Colagrossi,et al.  High-speed water impacts of flat plates in different ditching configuration through a Riemann-ALE SPH model , 2018 .

[35]  S. Marrone,et al.  An accurate and efficient SPH modeling of the water entry of circular cylinders , 2018 .

[36]  S. Shao,et al.  Development of a projection-based SPH method for numerical wave flume with porous media of variable porosity , 2018, Coastal Engineering.

[37]  Hitoshi Gotoh,et al.  An enhanced ISPH-SPH coupled method for simulation of incompressible fluid-elastic structure interactions , 2018, Comput. Phys. Commun..

[38]  Abbas Khayyer,et al.  On the state-of-the-art of particle methods for coastal and ocean engineering , 2018 .

[39]  Wei Li,et al.  SPH method with applications of oscillating wave surge converter , 2018 .