Efficient and reusable polyamide-56 nanofiber/nets membrane with bimodal structures for air filtration.

Nanofibrous media that both possess high airborne particle interception efficiency and robust air permeability would have broad technological implications for areas ranging from individual protection and industrial security to environmental governance; however, creating such filtration media has proved extremely challenging. Here we report a strategy to construct the bio-based polyamide-56 nanofiber/nets (PA-56 NFN) membranes with bimodal structures for effective air filtration via one-step electrospinning/netting. The PA-56 membranes are composed of completely covered two-dimensional (2D) ultrathin (∼20 nm) nanonets which are optimized by facilely regulating the solution concentration, and the bonded scaffold fibers constructed cavity structures which are synchronously created by using the CH3COOH inspiration. With integrated properties of small aperture, high porosity, and bonded scaffold, the resulting PA-56 NFN membranes exhibit high filtration efficiency of 99.995%, low pressure drop of 111 Pa, combined with large dust holding capacity of 49 g/m(2) and dust-cleaning regeneration ability, for filtrating ultrafine airborne particles in the most safe manner involving sieving principle and surface filtration. The successful synthesis of PA-56 NFN medium would not only make it a promising candidate for air filtration, but also provide new insights into the design and development of nanonet-based bimodal structures for various applications.

[1]  Bin Ding,et al.  Formation of novel 2D polymer nanowebs via electrospinning , 2006 .

[2]  K. W. Lee,et al.  Theoretical Study of Aerosol Filtration by Fibrous Filters , 1982 .

[3]  Jianyong Yu,et al.  Large-scale fabrication of highly aligned poly(m-phenylene isophthalamide) nanofibers with robust mechanical strength , 2014 .

[4]  F. Dominici,et al.  Emergency Admissions for Cardiovascular and Respiratory Diseases and the Chemical Composition of Fine Particle Air Pollution , 2009, Environmental health perspectives.

[5]  W. Sambaer,et al.  3D modeling of filtration process via polyurethane nanofiber based nonwoven filters prepared by electrospinning process , 2011 .

[6]  Q. Cai,et al.  Macroporous and nanofibrous poly(lactide-co-glycolide)(50/50) scaffolds via phase separation combined with particle-leaching. , 2012, Materials science & engineering. C, Materials for biological applications.

[7]  Haitao Luo,et al.  Kaempferol nanoparticles achieve strong and selective inhibition of ovarian cancer cell viability , 2012, International journal of nanomedicine.

[8]  Jie Zhu,et al.  Superelastic and superhydrophobic nanofiber-assembled cellular aerogels for effective separation of oil/water emulsions. , 2015, ACS nano.

[9]  B. Ding,et al.  Multilevel structured polyacrylonitrile/silica nanofibrous membranes for high-performance air filtration , 2014 .

[10]  Hermes Farina,et al.  Bio-based polyamide 11: Synthesis, rheology and solid-state properties of star structures , 2014 .

[11]  Gang Sun,et al.  A High-Throughput, Controllable, and Environmentally Benign Fabrication Process of Thermoplastic Nanofibers , 2007 .

[12]  Jianwen Liu,et al.  Bio-based semi-aromatic polyamide/functional clay nanocomposites: preparation and properties , 2014 .

[13]  Hubert Chanson,et al.  Energy dissipation, flow resistance and gas-liquid interfacial area in skimming flows on moderate-slope stepped spillways , 2009 .

[14]  Jianmao Yang,et al.  Hierarchically structured polysulfone/titania fibrous membranes with enhanced air filtration performance. , 2014, Journal of colloid and interface science.

[15]  Eon S. Lee,et al.  Evaluation of a high efficiency cabin air (HECA) filtration system for reducing particulate pollutants inside school buses. , 2015, Environmental science & technology.

[16]  S. Whitaker.  Flow in porous media I: A theoretical derivation of Darcy's law , 1986 .

[17]  I. Kim,et al.  Development of Polypropylene Nanofiber Production System , 2011 .

[18]  Z. Pan,et al.  Porous bead-on-string poly(lactic acid) fibrous membranes for air filtration. , 2015, Journal of colloid and interface science.

[19]  B. Ding,et al.  Electreted polyetherimide-silica fibrous membranes for enhanced filtration of fine particles. , 2015, Journal of colloid and interface science.

[20]  F. Zhang,et al.  Removal of Organic Aerosols from Furnace Flue Gas by Ceramic Filters , 2013 .

[21]  Seeram Ramakrishna,et al.  Preparation and characterization of nanofibrous filtering media , 2006 .

[22]  S. Vigneswaran,et al.  Deep Bed Filtration: Mathematical Models and Observations , 2005 .

[23]  Miqin Zhang,et al.  Centrifugal electrospinning of highly aligned polymer nanofibers over a large area , 2012 .

[24]  Chuanbin Mao,et al.  Biomimetic branched hollow fibers templated by self-assembled fibrous polyvinylpyrrolidone structures in aqueous solution. , 2010, ACS nano.

[25]  Na Wang,et al.  Tunable fabrication of three-dimensional polyamide-66 nano-fiber/nets for high efficiency fine particulate filtration , 2012 .

[26]  W. Sambaer,et al.  3D air filtration modeling for nanofiber based filters in the ultrafine particle size range , 2011 .

[27]  Bin Ding,et al.  Electro-spinning/netting: A strategy for the fabrication of three-dimensional polymer nano-fiber/nets , 2013, Progress in Materials Science.

[28]  Na Wang,et al.  Tortuously structured polyvinyl chloride/polyurethane fibrous membranes for high-efficiency fine particulate filtration. , 2013, Journal of colloid and interface science.

[29]  W. Fisk,et al.  Performance and costs of particle air filtration technologies. , 2002, Indoor air.

[30]  Beyhan Pekey,et al.  Fine particulate matter in the indoor air of barbeque restaurants: elemental compositions, sources and health risks. , 2013, The Science of the total environment.

[31]  Andreas Greiner,et al.  Electrospinning: a fascinating method for the preparation of ultrathin fibers. , 2007, Angewandte Chemie.

[32]  Wallace Woon-Fong Leung,et al.  Filtration of nano-aerosol using nanofiber filter under low Peclet number and transitional flow regime , 2011 .

[33]  B. Ding,et al.  Superamphiphobic nanofibrous membranes for effective filtration of fine particles. , 2014, Journal of colloid and interface science.

[34]  S. Zaripov,et al.  Analytical Model of the Transport of Aerosol Particles in a Circular Hole Inside a Porous Medium , 2015, Transport in Porous Media.

[35]  B. D. Malhotra,et al.  Highly sensitive biofunctionalized mesoporous electrospun TiO(2) nanofiber based interface for biosensing. , 2014, ACS applied materials & interfaces.

[36]  Mira Park,et al.  Facile electrospun Polyacrylonitrile/poly(acrylic acid) nanofibrous membranes for high efficiency particulate air filtration , 2015, Fibers and Polymers.

[37]  Seeram Ramakrishna,et al.  Nanofibrous filtering media: Filtration problems and solutions from tiny materials , 2007 .

[38]  B. Hsiao,et al.  Thin-film nanofibrous composite membranes containing cellulose or chitin barrier layers fabricated by ionic liquids , 2011 .

[39]  Brij B. Maini,et al.  Flow of dispersed particles through porous media — Deep bed filtration , 2009 .

[40]  J. Siegel,et al.  Ultrafine particle removal by residential heating, ventilating, and air-conditioning filters. , 2013, Indoor air.

[41]  B. Pourdeyhimi,et al.  Boehmite nanoparticles incorporated electrospun nylon-6 nanofiber web for new electret filter media , 2010 .

[42]  B. Ding,et al.  Ultralight nanofibre-assembled cellular aerogels with superelasticity and multifunctionality , 2014, Nature Communications.