Finding Optimized Conditions for 3D Printed High Calcium Fly Ash Based Alkali-Activated Mortar

[1]  N. Banthia,et al.  Unraveling pore structure alternations in 3D-printed geopolymer concrete and corresponding impacts on macro-properties , 2022, Additive Manufacturing.

[2]  Xingyang He,et al.  Low-carbon wet-ground fly ash geopolymer activated by single calcium carbide slag , 2022, Construction and Building Materials.

[3]  S. Lekshmi,et al.  An assessment on the durability performance of fly ash-clay based geopolymer mortar containing clay enhanced with lime and GGBS , 2022, Cleaner Materials.

[4]  P. Chindaprasirt,et al.  Rice Husk Ash and Fly Ash Geopolymer Hollow Block Based on NaOH Activated , 2022, Case Studies in Construction Materials.

[5]  Abhishek Sharma,et al.  Utilization of Recycled Fine Powder as an Activator in Fly Ash Based Geopolymer Mortar , 2022, SSRN Electronic Journal.

[6]  R. Zhong,et al.  Recent advances and productivity analysis of 3D printed geopolymers , 2022, Additive Manufacturing.

[7]  P. Chindaprasirt,et al.  Properties of polypropylene fiber reinforced cellular lightweight high calcium fly ash geopolymer mortar , 2021, Case Studies in Construction Materials.

[8]  K. Girija,et al.  Effect of source materials, additives on the mechanical properties and durability of fly ash and fly ash-slag geopolymer mortar: A review , 2021 .

[9]  M. Ribeiro,et al.  Role of temperature in 3D printed geopolymers: Evaluating rheology and buildability , 2021 .

[10]  P. Chindaprasirt,et al.  Changes in compressive strength, microstructure and magnetic properties of a high-calcium fly ash geopolymer subjected to high temperatures , 2020 .

[11]  Wensu Chen,et al.  Flexural behaviour of ambient cured geopolymer concrete beams reinforced with BFRP bars under static and impact loads , 2020 .

[12]  Yi Wang,et al.  Effect of sand content on engineering properties of fly ash-slag based strain hardening geopolymer composites , 2020, Journal of Building Engineering.

[13]  Yu Wang,et al.  3D recycled mortar printing: System development, process design, material properties and on-site printing , 2020 .

[14]  J. Sanjayan,et al.  Aggregate-bed 3D concrete printing with cement paste binder , 2020 .

[15]  Jack McAlorum,et al.  3D printed temperature-sensing repairs for concrete structures , 2020, Additive Manufacturing.

[16]  J. Sanjayan,et al.  Properties of high-calcium and low-calcium fly ash combination geopolymer mortar containing recycled aggregate , 2019, Heliyon.

[17]  Sreekanta Das,et al.  Effect of various glass aggregates on the shrinkage and expansion of cement mortar , 2019, Construction and Building Materials.

[18]  M. Sheikh,et al.  Investigation of engineering properties of normal and high strength fly ash based geopolymer and alkali-activated slag concrete compared to ordinary Portland cement concrete , 2019, Construction and Building Materials.

[19]  P. Chindaprasirt,et al.  Effect of calcium-rich compounds on setting time and strength development of alkali-activated fly ash cured at ambient temperature , 2018, Case Studies in Construction Materials.

[20]  Ming Jen Tan,et al.  Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing , 2018, Cement and Concrete Composites.

[21]  Viktor Mechtcherine,et al.  Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing , 2018, Construction and Building Materials.

[22]  Tao Zhang,et al.  The study of the structure rebuilding and yield stress of 3D printing geopolymer pastes , 2018, Construction and Building Materials.

[23]  A. Kashani,et al.  Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.

[24]  Ming Jen Tan,et al.  Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material , 2017 .

[25]  Ming Jen Tan,et al.  Additive manufacturing of geopolymer for sustainable built environment , 2017 .

[26]  Prinya Chindaprasirt,et al.  Setting Time, Strength, and Bond of High-Calcium Fly Ash Geopolymer Concrete , 2015 .

[27]  Theerawat Sinsiri,et al.  Properties of high calcium fly ash geopolymer pastes with Portland cement as an additive , 2013, International Journal of Minerals, Metallurgy, and Materials.

[28]  P. Chindaprasirt,et al.  Effect of SiO2 and Al2O3 on the setting and hardening of high calcium fly ash-based geopolymer systems , 2012, Journal of Materials Science.

[29]  Chai Jaturapitakkul,et al.  NaOH-activated ground fly ash geopolymer cured at ambient temperature , 2011 .

[30]  Dale P. Bentz,et al.  Early-Age Properties of Cement-Based Materials. II: Influence of Water-to-Cement Ratio , 2009 .

[31]  P. Chindaprasirt,et al.  Mixed cement containing fly ash for masonry and plastering work , 2005 .

[32]  P. Aungkavattana,et al.  Effect of NaOH Concentration and Curing Regimes on Compressive Strength of Fly Ash-Based Geopolymer , 2021 .

[33]  B. Panda,et al.  Measurement of tensile bond strength of 3D printed geopolymer mortar , 2018 .

[34]  Z. Man,et al.  Concentration of NaOH and the Effect on the Properties of Fly Ash Based Geopolymer , 2016 .

[35]  Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle , 2022 .