Automated stiffness characterization of living tobacco BY2 cells using the Cellular Force Microscope

Understanding the process of cellular morphogenesis requires the characterization of local mechanical properties of living cells in situ. For this purpose, an automated microrobotic system, the Cellular Force Microscope (CFM) has been developed. Its suitability for single cell characterization has been reported in previous work and extensive use on characterization of both single cells and tissues has been demonstrated. A simple experimental method for the determination of the CFM's accuracy, based on the comparison of the measured stiffness with the true stiffness of a calibrated SI-traceable reference artifact, is demonstrated. This method is a practical alternative to the complex complete uncertainty analysis of all the sensors involved in the stiffness measurement based on an SI-traceable reference artifact. We then use the CFM to characterize the stiffness of living Tobacco BY2 cells. The apparent stiffness is determined from the force indentation curves collected from living cells at forces ranging from 10 microNewtons to forces in which the cell slips away or ruptures. The results show a nonlinear increase in the apparent cell stiffness as the applied load increases. This observation combined with the reference measurements done on the calibrated stiffness standard dictate that the stiffness variation stems from the biological organism and not from the CFM.

[1]  John O. Outwater,et al.  Ball Tonometry: A Rapid, Nondestructive Method for Measuring Cell Turgor Pressure in Thin-Walled Plant Cells , 2000, Journal of Plant Growth Regulation.

[2]  L Wang,et al.  Modelling the mechanical properties of single suspension-cultured tomato cells. , 2004, Annals of botany.

[3]  B. Nelson,et al.  Quantifying growth mechanics of living, growing plant cells in situ using microbotics , 2011 .

[4]  Kristofer S. J. Pister,et al.  Miniature heart cell force transducer system implemented in MEMS technology , 2001, IEEE Transactions on Biomedical Engineering.

[5]  Bradley J. Nelson,et al.  Biological Cell Injection Using an Autonomous MicroRobotic System , 2002, Int. J. Robotics Res..

[6]  D. Cosgrove.  Growth of the plant cell wall , 2005, Nature Reviews Molecular Cell Biology.

[7]  Byoung-Il Kim,et al.  Piezoresistive Cantilever for Accurate Force Measurements at the Micro/Nano-size Level , 2008 .

[8]  Yu Sun,et al.  Investigation of mechanical properties of soft hydrogel microcapsules in relation to protein delivery using a MEMS force sensor. , 2010, Journal of biomedical materials research. Part A.

[9]  R. Hochmuth,et al.  Micropipette aspiration of living cells. , 2000, Journal of biomechanics.

[10]  Ingo Burgert,et al.  Exploring the micromechanical design of plant cell walls. , 2006, American journal of botany.

[11]  Yu Sun,et al.  Nanonewton force-controlled manipulation of biological cells using a monolithic MEMS microgripper with two-axis force feedback , 2008 .

[12]  Wojciech Strojny,et al.  Stiffness of normal and pathological erythrocytes studied by means of atomic force microscopy. , 2006, Journal of biochemical and biophysical methods.

[13]  Cris Kuhlemeier,et al.  Cellular Force Microscopy for in Vivo Measurements of Plant Tissue Mechanics1[W][OA] , 2012, Plant Physiology.

[14]  Bradley J. Nelson,et al.  The cellular force microscope (CFM): A microrobotic system for quantitating the growth mechanics of living, growing plant cells in situ , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[15]  Jon R. Pratt,et al.  SI traceability: Current status and future trends for forces below 10 microNewtons , 2010 .

[16]  Chun-Cheng Huang,et al.  Optical tweezers as sub-pico-newton force transducers , 2001 .

[17]  Jordanka Zlatanova,et al.  Magnetic tweezers: a sensitive tool to study DNA and chromatin at the single-molecule level. , 2003, Biochemistry and cell biology = Biochimie et biologie cellulaire.

[18]  Jenny Blewett,et al.  A micromanipulation method to measure the mechanical properties of single tomato suspension cells , 2004, Biotechnology Letters.

[19]  B. Nelson,et al.  Monolithically Fabricated Microgripper With Integrated Force Sensor for Manipulating Microobjects and Biological Cells Aligned in an Ultrasonic Field , 2007, Journal of Microelectromechanical Systems.

[20]  S. Standard.  GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT , 2006 .

[21]  P. Schopfer,et al.  Biomechanics of plant growth. , 2006, American journal of botany.

[22]  Lutz Doering,et al.  Piezoresistive cantilever as portable micro force calibration standard , 2003 .

[23]  S. Suresh,et al.  Cell and molecular mechanics of biological materials , 2003, Nature materials.

[24]  O. Sahin,et al.  Integrated optical diffractive micrograting-based injection force sensor , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[25]  D. P. Potasek,et al.  Characterizing fruit fly flight behavior using a microforce sensor with a new comb-drive configuration , 2005, Journal of Microelectromechanical Systems.

[26]  A. Geitmann,et al.  Mechanics and modeling of plant cell growth. , 2009, Trends in plant science.

[27]  Jon R. Pratt,et al.  A Piezoresistive Cantilever Force Sensor for Direct AFM Force Calibration , 2007 .

[28]  C-E Aubin,et al.  Finite-Element Analysis of Geometrical Factors in Micro-Indentation of Pollen Tubes , 2006, Biomechanics and modeling in mechanobiology.

[29]  Arezki Boudaoud,et al.  In vivo analysis of local wall stiffness at the shoot apical meristem in Arabidopsis using atomic force microscopy. , 2011, The Plant journal : for cell and molecular biology.

[30]  Martyn C. Davies,et al.  Comparison of calibration methods for atomic-force microscopy cantilevers , 2002 .

[31]  Hanns-Christof Spatz,et al.  Micromechanics of plant tissues beyond the linear-elastic range , 2002, Planta.

[32]  Lan Wang,et al.  Comparison of plant cell turgor pressure measurement by pressure probe and micromanipulation , 2006, Biotechnology Letters.

[33]  Jaydev P. Desai,et al.  Atomic force microscopy-based single-cell indentation: Experimentation and finite element simulation , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[34]  Arezki Boudaoud,et al.  The role of mechanical forces in plant morphogenesis. , 2011, Annual review of plant biology.

[35]  Anja Geitmann,et al.  The local cytomechanical properties of growing pollen tubes correspond to the axial distribution of structural cellular elements , 2004, Sexual Plant Reproduction.

[36]  F Beyeler,et al.  Monolithically Integrated Two-Axis Microtensile Tester for the Mechanical Characterization of Microscopic Samples , 2010, Journal of Microelectromechanical Systems.

[37]  J. Lockhart.  An analysis of irreversible plant cell elongation. , 1965, Journal of theoretical biology.

[38]  Shengyuan Yang,et al.  Microfabricated Force Sensors and Their Applications in the Study of Cell Mechanical Response , 2009 .

[39]  David Stuart Thompson,et al.  How do cell walls regulate plant growth? , 2005, Journal of experimental botany.

[40]  Anton P. J. Middelberg,et al.  On uniquely determining cell–wall material properties with the compression experiment , 1998 .

[41]  Anja Geitmann,et al.  Experimental approaches used to quantify physical parameters at cellular and subcellular levels. , 2006, American journal of botany.