Effect of HCl concentration on TiB2 separation from a self-propagating high-temperature synthesis (SHS) product

[1]  A. Khanra,et al.  Double SHS of ZrB2 powder , 2008 .

[2]  G. Hilmas,et al.  Pressureless sintering of carbon-coated zirconium diboride powders , 2007 .

[3]  N. Setoudeh,et al.  Formation of zirconium diboride (ZrB2) by room temperature mechanochemical reaction between ZrO2, B2O3 and Mg , 2006 .

[4]  J. Lee,et al.  A study of tungsten nanopowder formation by self-propagating high-temperature synthesis , 2005 .

[5]  A. Khanra,et al.  Comparative Studies on Sintering Behavior of Self‐Propagating High‐Temperature Synthesized Ultra‐Fine Titanium Diboride Powder , 2005 .

[6]  Q. Jiang,et al.  Fabrication of Steel Matrix Composite Locally Reinforced with in Situ TiB2 Particulate using Self–Propagating High–Temperature Synthesis Reaction of Ni–Ti–B System During Casting , 2005 .

[7]  N. Welham.  Formation of Nanometric TiB2 from TiO2 , 2004 .

[8]  H. Y. Wang,et al.  In situ synthesis of TiB2/Mg composite by self-propagating high-temperature synthesis reaction of the Al–Ti–B system in molten magnesium , 2004 .

[9]  R. Ricceri,et al.  A fast and low-cost room temperature process for TiB2 formation by mechanosynthesis , 2004 .

[10]  Q. Jiang,et al.  Fabrication of TiB2 and TiB2–TiC particulates reinforced magnesium matrix composites , 2004 .

[11]  Y. Qian,et al.  A facile one-step route to nanocrystalline TiB2 powders , 2004 .

[12]  A. Khanra,et al.  Effect of NaCl on the synthesis of TiB2 powder by a self-propagating high-temperature synthesis technique , 2004 .

[13]  L. Pathak,et al.  Defect structures in zirconium diboride powder prepared by self-propagating high-temperature synthesis , 2004 .

[14]  Li Lu,et al.  Improvement in mechanical properties of in-situ Al–TiB2 composite by incorporation of carbon , 2003 .

[15]  F. Sahin,et al.  Production of Aluminum-Titanium-Boron Master Alloy by Aluminothermic Process , 2001 .

[16]  O. Yucel,et al.  Reduction smelting of bursa‐uludağ tungsten concentrates by the aluminothermic process , 2000 .

[17]  M. O. Lai,et al.  Synthesis of in situ Al–TiB2 composites using stir cast route , 1999 .

[18]  N. Welham.  Formation of TIB2 from Rutile by Room Temperature Ball Milling , 1999 .

[19]  Fathi Habashi,et al.  Handbook of extractive metallurgy , 1997 .

[20]  A. Weimer.  Thermochemistry and Kinetics , 1997 .

[21]  Z. A. Munir,et al.  Self-propagating exothermic reactions: the synthesis of high-temperature materials by combustion , 1989 .