Compressive strength and damage mechanisms of 3D needle-punched C /SiC–Al composites

[1]  Sarabjit Singh,et al.  A comparative study of tensile strength of Cf/SiC composites having single layer and multilayer interphases , 2019 .

[2]  Yang Wang,et al.  Microstructure and mechanical properties of C /SiC–Al composites fabricated by PIP and vacuum pressure infiltration processes , 2019, Journal of Alloys and Compounds.

[3]  Yang Li,et al.  Mechanical response and microstructure of 2D carbon fiber reinforced CMCs containing Cu-Si alloy exposed to fatigue stresses , 2019, Composites Part B: Engineering.

[4]  D. Han,et al.  Compressive strength and damage mechanisms of 2D-C/SiC composites at high temperatures , 2018, Ceramics International.

[5]  W. Zhou,et al.  Microstructure and properties of plain-weave carbon fabric reinforced ceramic composites containing Cu-Si alloy , 2018, Composites Part B: Engineering.

[6]  Fei Xu,et al.  Two failure modes of C/SiC composite under different impact loads , 2018 .

[7]  T. Babu,et al.  Novel silazane modified phenol formaldehyde derived Cf/PyC/SiC-Si3N4 composites with improved mechanical strength for thermo-structural applications , 2018 .

[8]  Yang Li,et al.  Microstructure and properties of Cu-Ti alloy infiltrated chopped Cf reinforced ceramics composites , 2017 .

[9]  H. Zhong,et al.  Properties and microstructure evolution of Cf/SiC composites fabricated by polymer impregnation and pyrolysis (PIP) with liquid polycarbosilane , 2017 .

[10]  Song Wang,et al.  Preparation and properties of C/TaC composites via PIP process , 2017 .

[11]  Wen-ming Guo,et al.  Microstructure and properties of 2D-Cf/SiC composite fabricated by combination of CVI and PIP process with SiC particle as inert fillers , 2017 .

[12]  Yuewu Wang,et al.  Thermo-mechanical properties of C/SiC composite structure under extremely high temperature environment up to 1500 °C , 2016 .

[13]  Xingwang Cheng,et al.  Ballistic performance and damage characteristics of chemical vapor infiltration quasi 3D-Cf/SiC composites , 2016, Journal of Wuhan University of Technology-Mater. Sci. Ed..

[14]  Weilan Liu,et al.  Design and ballistic penetration of the ceramic composite armor , 2016 .

[15]  T. Zeng,et al.  Compressive behavior of C/SiC composite sandwich structure with stitched lattice core , 2015 .

[16]  Zhaofeng Chen,et al.  Mechanical properties and microstructure of 3D orthogonal quartz fiber reinforced silica composites fabricated by silicasol-infiltration-sintering , 2012 .

[17]  S. Dong,et al.  Microstructure observation and analysis of 3D carbon fiber reinforced SiC-based composites fabricated through filler enhanced polymer infiltration and pyrolysis , 2012 .

[18]  D. Sciti,et al.  Microstructure and properties of HfC and TaC-based ceramics obtained by ultrafine powder , 2011 .

[19]  S. Dong,et al.  Fabrication of carbon fiber reinforced ceramic matrix composites with improved oxidation resistance using boron as active filler , 2010 .

[20]  Zhaofeng Chen,et al.  Effects of ablation at different regions in three-dimensional orthogonal C/SiC composites ablated by oxyacetylene torch at 1800 °C , 2009 .

[21]  Zhaofeng Chen,et al.  Morphology and microstructure of 2.5 dimension C/SiC composites ablated by oxyacetylene torch , 2009 .

[22]  Zhaofeng Chen,et al.  Comparison of morphology and microstructure of ablation centre of C/SiC composites by oxy-acetylene torch at 2900 and 3550 °C , 2008 .

[23]  S. Dong,et al.  The fabrication of 2D Cf/SiC composite by a modified PIP process using active Al powders as active filler , 2008 .

[24]  D. Sciti,et al.  High‐Strength and ‐Toughness Electroconductive SiC‐Based Composites , 2006 .

[25]  Jingchuan Zhu,et al.  Inhibition of liquid Si infiltration into carbon–carbon composites by the addition of Al to the Si slurry pre-coating: mechanism analysis , 2002 .