论文信息 - Characterization of decay component of resist surface charging on EBM-8000

Characterization of decay component of resist surface charging on EBM-8000

In our previous work, we reported the static portion of the surface charging on EBM-8000 and compared it with that on EBM-6000. The scope of this paper is to report the analysis of charging decay component on EBM-8000 and compare it with EBM-6000. We confirmed that our fundamental modeling scheme of the charging decay worked well on EBM-8000 as well as on EBM-6000. However, we found totally different charging decay behaviors between EBM-8000 and EBM-6000. To explain the results, we propose a conceptual model of the charging decay phenomena both on EBM-8000 and EBM-6000.

Takashi Kamikubo | Noriaki Nakayamada | Hirohito Anze | Muheniro Ogasawara

[1] Takashi Kamikubo,et al. Modeling of resist surface charging effect on EBM-8000 and its comparison with EBM-6000 , 2013, Photomask and Next Generation Lithography Mask Technology.

[2] Takashi Kamikubo,et al. Advancing the charging effect correction with time-dependent discharging model , 2011, Photomask Japan.

[3] Takashi Kamikubo,et al. Modeling of charging effect and its correction by EB mask writer EBM-6000 , 2008, Photomask Japan.

[4] Masatoshi Kotera,et al. Measurement of surface potential of insulating film on a conductive substrate in a scanning electron microscope specimen chamber , 2011 .

[5] Noriaki Nakayamada,et al. The trouble starts with using electrons: putting charging effect correction models to the test , 2011, Photomask Technology.