Plant-oil-based lubricants and hydraulic fluids

It is estimated that, at present, approximately 50% of all lubricants sold worldwide end up in the environment via total loss applications, volatility, spills or accidents. More than 95% of these materials are currently mineral oil based. In view of their high ecotoxicity and low biodegradability, mineral oil-based lubricants constitute a considerable threat to the environment. In contrast, most lubricants and hydraulic fluids based on plant oils are rapidly and completely biodegradable and are of low ecotoxicity; moreover, lubricants based on plant oils display excellent tribological properties and generally have very high viscosity indices and flashpoints. However, in order to compete with mineral-oil-based products, some of their inherent disadvantages must be corrected, such as their sensitivity to hydrolysis and oxidative attack, and their behaviour at low temperatures. Various methods to improve the undesirable properties of native plant oils will be discussed. In parallel, government regulations that encourage or enforce the use of bio-based fluids, at least in ecologically sensitive areas, will help to increase their market share. Using the numerous possibilities for selective breeding and/or chemical improvement of the double bond systems of natural fatty acids by increased R&D, the major obstacles regarding the use of plant-based raw materials for the production of lubricant base fluids can be overcome and bio-based fluids should expect a future with increasing market shares. Copyright © 2006 Society of Chemical Industry

[1]  A. Willing.  Oleochemical esters - environmentally compatible raw materials for oils and lubricants from renewable resources , 1999 .

[2]  Alla M. Petlyuk,et al.  Oxidation Stability and Tribological Behavior of Vegetable Oil Hydraulic Fluids , 2004 .

[3]  J. Fischer,et al.  Heterogeneously Catalysed Synthesis of New 3-Alkoxypivalic Acids from Substituted 1,3-Dioxanes , 2000 .

[4]  P. Bondioli,et al.  Synthesis of biolubricants with high viscosity and high oxidation stability , 2003 .

[5]  Hubertus Murrenhoff,et al.  Biodegradability testing of synthetic ester lubricants--effects of additives and usage. , 2002, Chemosphere.

[6]  D. Kodali,et al.  High performance ester lubricants from natural oils , 2002 .

[7]  E. H. Pryde.  Vegetable oils as fuel alternatives — Symposium overview , 1984 .

[8]  N S Battersby,et al.  The biodegradability and microbial toxicity testing of lubricants--some recommendations. , 2000, Chemosphere.

[9]  Biermann,et al.  Friedel-Crafts Alkylation of Alkenes: Ethylaluminum Sesquichloride Induced Alkylations with Alkyl Chloroformates. , 1999, Angewandte Chemie.

[10]  M. R. G. Klaas,et al.  Complete and partial epoxidation of plant oils by lipase-catalyzed perhydrolysis 1 Based partly on a , 1999 .

[11]  Richard A. Kerr,et al.  The Next Oil Crisis Looms Large--and Perhaps Close , 1998, Science.

[12]  A. Bírová,et al.  Lubricating oils based on chemically modified vegetable oils , 2002 .

[13]  D. Hörner.  Recent trends in environmentally friendly lubricants , 2002 .

[14]  Theo Mang,et al.  Lubricant base fluids based on renewable raw materials: Their catalytic manufacture and modification , 2001 .

[15]  H. Baumann,et al.  Natural Fats and Oils—Renewable Raw Materials for the Chemical Industry , 1988 .

[16]  Shengrong Yang,et al.  The study of epoxidized rapeseed oil used as a potential biodegradable lubricant , 2000 .

[17]  M. Kessler,et al.  Fluid qualification tests – evaluation of the lubricating properties of biodegradable fluids , 2002 .

[18]  A. Behr,et al.  Hydroaminomethylation of fatty acids with primary and secondary amines — A new route to interesting surfactant substrates , 2000 .

[19]  S. Erhan,et al.  Lubricant Base Stocks from Modified Soybean Oil , 2002 .

[20]  Bill Wilson,et al.  Lubricants and functional fluids from renewable sources , 1998 .

[21]  Sevim Z. Erhan,et al.  Biobased industrial fluids and lubricants. , 2002 .

[22]  Pekka Linko,et al.  Transesterification of trimethylolpropane and rapeseed oil methyl ester to environmentally acceptable lubricants , 1998 .

[23]  J. Metzger,et al.  Alkylaluminium Dichloride Induced Friedel-Crafts Acylation of Unsaturated Carboxylic Acids and Alcohols , 1993 .

[24]  A. Willing,et al.  Lubricants based on renewable resources--an environmentally compatible alternative to mineral oil products. , 2001, Chemosphere.

[25]  L. Johansson,et al.  Copper catalysts in the selective hydrogenation of soybean and rapeseed oils: I. The activity of the copper chromite catalyst , 1979 .

[26]  U Pagga,et al.  Testing biodegradability with standardized methods. , 1997, Chemosphere.

[27]  R. Shubkin.  Synthetic lubricants and high-performance functional fluids , 1992 .

[28]  E. H. Pryde.  Hydroformylation of unsaturated fatty acids , 1984 .

[29]  David L. Goodstein,et al.  Out of Gas: The End of the Age of Oil , 2004 .

[30]  M. R. G. Klaas,et al.  Chemoenzymatic epoxidation of unsaturated fatty acid esters and plant oils , 1996 .

[31]  Wilfried J. Bartz,et al.  Lubricants and the environment , 1998 .

[32]  Bruce A. Weber,et al.  Unified mechanism for polyunsaturated fatty acid autoxidation. Competition of peroxy radical hydrogen atom abstraction, .beta.-scission, and cyclization , 1981 .

[33]  Milan Kopp,et al.  Environmentally adapted lubricants in the Nordic marketplace – recent developments , 2002 .

[34]  W. Friedt,et al.  New Syntheses with Oils and Fats as Renewable Raw Materials for the Chemical Industry. , 2000, Angewandte Chemie.

[35]  Craig Bond Hatfield,et al.  Oil back on the global agenda , 1997, Nature.