Research on Method of Process Monitoring with Deterministic Disturbances Based on Just-in-Time Learning

An industrial process system plays a crucial role in the economic development of a country or region, process monitoring is effective in ensuring the safety and reliability of industrial processes, and has received much attention. For complex nonlinear systems, the traditional model-based methods and knowledge-based methods are difficult to apply, and data-driven methods provide a new solution. However, for the complex nonlinear systems with deterministic disturbances, the existing data-driven approaches also exhibit defects because they no longer satisfy the Gauss distribution. To solve this problem, a method called JITL-DD for process monitoring of nonlinear systems with deterministic disturbances is proposed. The JITL-DD combines the JITL model and the DD fault diagnosis method, the JITL model is used to predict the output of the local model, then the residual is processed as the input of the DD, and the fault information is obtained by analyzing the residual. The continuous stirred tank heater process is used as a simulation of the nonlinear system to illustrate the effectiveness of the proposed method.

[1]  Jianbin Qiu,et al.  Descriptor reduced-order sliding mode observers design for switched systems with sensor and actuator faults , 2017, Autom..

[2]  Jie Yu.  A nonlinear kernel Gaussian mixture model based inferential monitoring approach for fault detection and diagnosis of chemical processes , 2012 .

[3]  Min-Sen Chiu,et al.  Nonlinear process monitoring using JITL-PCA , 2005 .

[4]  Shen Yin,et al.  Fault-Tolerant Control of Time-Delay Markov Jump Systems With $It\hat{o}$ Stochastic Process and Output Disturbance Based on Sliding Mode Observer , 2018, IEEE Transactions on Industrial Informatics.

[5]  Donghua Zhou,et al.  Geometric properties of partial least squares for process monitoring , 2010, Autom..

[6]  Simona Onori,et al.  Model-based Diagnosis of an Automotive Electric Power Generation and Storage System , 2014, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[7]  Xiaoping Liu,et al.  Robust Adaptive Neural Tracking Control for a Class of Stochastic Nonlinear Interconnected Systems , 2016, IEEE Transactions on Neural Networks and Learning Systems.

[8]  Steven X. Ding,et al.  Real-time fault diagnosis and fault-tolerant control , 2015, IEEE Transactions on Industrial Electronics.

[9]  Zidong Wang,et al.  On Nonlinear $H_{\infty }$ Filtering for Discrete-Time Stochastic Systems With Missing Measurements , 2008, IEEE Transactions on Automatic Control.

[10]  Kai Zhang,et al.  A data-driven fault detection approach for static processes with deterministic disturbances , 2014, 2014 IEEE 23rd International Symposium on Industrial Electronics (ISIE).

[11]  Xu Yang,et al.  Coupling Dynamic Model and Control of Chatter in Cold Rolling , 2012 .

[12]  Tao Jiang,et al.  Parameter Estimation-Based Fault Detection, Isolation and Recovery for Nonlinear Satellite Models , 2008, IEEE Transactions on Control Systems Technology.

[13]  Shen Yin,et al.  Recursive Total Principle Component Regression Based Fault Detection and Its Application to Vehicular Cyber-Physical Systems , 2018, IEEE Transactions on Industrial Informatics.

[14]  Mogens Blanke,et al.  Fault diagnosis of downhole drilling incidents using adaptive observers and statistical change detection , 2015 .

[15]  Deyong You,et al.  WPD-PCA-Based Laser Welding Process Monitoring and Defects Diagnosis by Using FNN and SVM , 2015, IEEE Transactions on Industrial Electronics.

[16]  Okyay Kaynak,et al.  Sliding Mode Observer-Based FTC for Markovian Jump Systems With Actuator and Sensor Faults , 2017, IEEE Transactions on Automatic Control.

[17]  Ali Borji,et al.  What/Where to Look Next? Modeling Top-Down Visual Attention in Complex Interactive Environments , 2014, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[18]  Torsten Jeinsch,et al.  Data-driven design of KPI-related fault-tolerant control system for wind turbines , 2013, 2013 American Control Conference.

[19]  Carl-Fredrik Mandenius,et al.  Applying process monitoring with multivariate analysis through a knowledge-based systems approach to a paperboard machine , 2005, Comput. Ind..

[20]  Sarangapani Jagannathan,et al.  Model-based fault detection, estimation, and prediction for a class of linear distributed parameter systems , 2016, Autom..

[21]  Richard D. Braatz,et al.  Fault Detection and Diagnosis in Industrial Systems , 2001 .

[22]  K. Khorasani,et al.  Fault detection and isolation of gas turbine engines using a bank of neural networks , 2015 .