Flexural and Impact Properties of 2D and 3D Jute/GF/Epoxy Hybrid Composite Materials

In order characterize the outstanding performance of the three dimensional (3D) hybrid composites, the charpy and flexural test has been carried out. 3D fiber structures have been achieved by using hand lay-up process and machine stitching method. Materials for hand lay-up and machine stitching process were glass fiber, jute fiber, and epoxy resin and nylon fiber respectively. Two dimensional (2D) glass fiber composite and 2D hybrid composite with the same stacking sequence as three dimensional (3D) counterparts have also been fabricated for the comparison of impact and flexural strength. The impact strength of 3D hybrid composite was increased (5-10%) compared with that 2D glass fiber and 2D hybrid composites. The flexural strength and modulus of 3D hybrid composite were increased (5-10%) compared with that of 2D hybrid composites.

[1]  R. Zitoune,et al.  Study of Mechanical and Thermomechanical Properties of Jute/Epoxy Composite Laminate , 2010 .

[2]  A. Mustafa,et al.  Jute Reinforced Polypropylene Composite: Effect of Surface Pretreatment by Photocuring with Acrylic Monomers , 2009 .

[3]  N. Naik,et al.  Hybrid composites under high strain rate compressive loading , 2008 .

[4]  J. Byun,et al.  Impact properties of laminated composites with stitching fibers , 2006 .

[5]  K. Ahmed,et al.  Mechanical Behavior of Isothalic Polyester-based Untreated Woven Jute and Glass Fabric Hybrid Composites , 2006 .

[6]  J. d’Almeida,et al.  Influence of Fiber Orientation on the Mechanical Properties of Polyester/Jute Composites , 2006 .

[7]  Shaik Jeelani,et al.  Performance of stitched/unstitched woven carbon/epoxy composites under high velocity impact loading , 2004 .

[8]  Mubarak A. Khan,et al.  Effect of alkali and ultraviolet (UV) radiation pretreatment on physical and mechanical properties of 1,6‐hexanediol diacrylate–grafted jute yarn by UV radiation , 2004 .

[9]  Norman Jones,et al.  High velocity perforation behaviour of polymer composite laminates , 1999 .

[10]  P. Mallick.  Fiber-reinforced composites : materials, manufacturing, and design , 1989 .

[11]  M. Ansell,et al.  Jute-reinforced polyester composites , 1985 .

[12]  J. Byun,et al.  Impact Performance of 3D Interlock Textile Composites , 2004 .

[13]  Joon-Hyung Byun,et al.  1.23 – Mechanics of Textile Composites , 2000 .

[14]  F. Larsson,et al.  Damage tolerance of a stitched carbon/epoxy laminate , 1997 .