Mixing Characteristics of Coaxial Injectors at High Gas to Liquid Momentum Ratios
暂无分享,去创建一个
[1] J. Koo,et al. Combustion Characteristics of a Coaxial-Porous Injector , 2014 .
[2] J. Koo,et al. Effects of Wall-injection Length on Spray Core and Combustion Performance in a Coaxial Porous Injector , 2014 .
[3] Youngbin Yoon,et al. Dense Spray Patternation using Optical Tomography , 2013 .
[4] Guobiao Cai,et al. Pressure and Geometry Scaling of Gaseous Hydrogen/Gaseous Oxygen Shear-Coaxial Injectors , 2012 .
[5] Li-jun Yang,et al. Stability of Confined Gas-Liquid Shear Flows in Recessed Shear Coaxial Injectors , 2012 .
[6] W. Anderson,et al. Response of a Gas-Centered Swirl Coaxial Injector to Transverse Instabilities , 2011 .
[7] C. J. Eberhart,et al. Effects of Variable Chamber Pressure on Swirl Coaxial Injection: A Cold Flow Study , 2010 .
[8] S. Seo,et al. Combustion Characteristics of Bi-Liquid Swirl Coaxial Injectors with Respect to a Recess , 2010 .
[9] A. Gupta,et al. Fate of Cryogenic Fl uid Flow and Atomization from a Sheer Coaxial Injector under Pre -Ignition Conditions , 2008 .
[10] Young-Min Han,et al. Spray Distribution Measurement at High Ambient Pressure , 2008 .
[11] Vigor Yang,et al. Cryogenic fluid dynamics of pressure swirl injectors at supercritical conditions , 2008 .
[12] A. Gupta,et al. Characterization of Cryogenic Flow and Atomization from a Coaxial Rocket Injector , 2007 .
[13] Vigor Yang,et al. CRYOGENIC FLUID JETS AND MIXING LAYERS IN TRANSCRITICAL AND SUPERCRITICAL ENVIRONMENTS , 2006 .
[14] W. Bachalo,et al. Phase Doppler Measurements in Dense Sprays , 1998 .
[15] T. Tomita,et al. Comparative Study of Recessed and Non-recessed Swirl Coaxial Injectors , 1997 .
[16] T. Tomita,et al. LOX/LH2 Subscale Swirl Coaxial Injector Testing , 1997 .
[17] Michael M. Micci,et al. Shear coaxial injector spray characterization near the LOX post tip region , 1995 .
[18] S. Pal,et al. Swirl coaxial atomization - Cold-flow and hot-fire experiments , 1995 .
[19] J. Davis,et al. Single element injector testing for STME injector technology , 1992 .
[20] Sandra K. Elam,et al. Subscale LOX/hydrogen testing with a modular chamber and a swirl coaxial injector , 1991 .
[21] G. Cox. Rocket engine injection element characterization , 1988 .
[22] H. Gomi,et al. PNEUMATIC ATOMISATION WITH COAXIAL INJECTORS : Measurements of Drop Sizes by the Diffraction Method and Liquid Phase Fraction by the Attenuation Method of Light , 1985 .
[23] R. J. Burick,et al. Atomization and mixing characteristics of gas/liquid coaxial injector elements. , 1971 .
[24] D. T. Campbell,et al. Investigation of gas augmented injectors Final report , 1970 .
[25] N. Dombrowski,et al. The flow characteristics of swirl (centrifugal) spray pressure nozzles with low viscosity liquids , 1969 .
[26] Robert R. Atherton,et al. Air Force Reusable Rocket Engine Program XLR129-P-1 Engine Performance , 1969 .
[27] H. Seifert,et al. Rocket Propulsion Elements , 1963 .
[28] S. M. De Corso,et al. Effect of Ambient and Fuel Pressure on Nozzle Spray Angle , 1957, Journal of Fluids Engineering.
[29] W. Marsden. I and J , 2012 .
[30] A. Gupta,et al. Cryogenic Flow and Atomization from a Coaxial Injector , 2009 .
[31] A. Gupta,et al. Simulation of Flow and Mixing from a Cryogenic Rocket Injector , 2007 .
[32] S. Rahman. Primary atomization study of a swirl coaxial liquid propellant rocket injector , 1997 .
[33] Arthur H. Lefebvre,et al. Fuel Distributions from Pressure-Swirl Atomizers , 1985 .