Discoloration Effects of High-Dose γ-Irradiation and Long-Term Thermal Aging of (U)HMW-PE

Two polyethylene types with ultra-high (UHMW-PE) and high molecular weight (HMW-PE) used as neutron radiation shielding materials in casks for radioactive waste were irradiated with doses up to 600 kGy using a 60Co gamma source. Subsequently, thermal aging at 125°C was applied for up to one year. Degradation effects in the materials were characterized using colorimetry, UV-Vis spectroscopy, IR spectroscopy, and DSC. Both materials exhibited a yellowing upon irradiation. The discoloration of UHMW-PE disappeared again after thermal aging. Therefore, the yellowing is assumed to originate from annealable color centers in the form of free radicals that are trapped in the crystalline regions of the polymer and recombine at elevated temperatures. For the antioxidant-containing HMW-PE, yellowing was observed after both irradiation and thermal aging. The color change was correlated mainly to decomposition products of the antioxidant in addition to trapped radicals as in UHMW-PE. Additionally, black spots appeared after thermal aging of HMW-PE.

[1]  Kevin Barraclough,et al.  I and i , 2001, BMJ : British Medical Journal.

[2]  R. Thompson,et al.  Oxidation of gamma-irradiated ultrahigh molecular weight polyethylene , 2000 .

[3]  L. Costa,et al.  Oxidation behaviour in prosthetic UHMWPE components sterilised with high energy radiation in a low-oxygen environment , 2006 .

[4]  Aaas News,et al.  Book Reviews , 1893, Buffalo Medical and Surgical Journal.

[5]  M. Edge,et al.  Color inhibition of phenolic antioxidants in Ziegler‐Natta polyethylene. I. In‐situ polymer studies , 2009 .

[6]  U. Schade,et al.  New infrared spectroscopic beamline at BESSY II , 2002 .

[7]  G. N. Patel.  Crystallinity and the effect of ionizing radiation in polyethylene. VI. Decay of vinyl groups , 1975 .

[8]  J. Schanda,et al.  Colorimetry : understanding the CIE system , 2007 .

[9]  J. A. Puértolas,et al.  Characterization of highly crosslinked polyethylenes by colorimetry , 2012 .

[10]  E. H. Andrews,et al.  Radiation‐induced crystallinity changes in linear polyethylene , 1983 .

[11]  D. Wolff,et al.  Neutron Radiation Shielding Material Polyethylene : Consequences of Gamma Irradiation – 15062 , 2022 .

[12]  L. Finegold,et al.  Effect of radiation on the structure of ultrahigh molecular weight polyethylene , 1985 .

[13]  M. Sinclair,et al.  Discoloration and subsequent recovery of optical polymers exposed to ionizing radiation , 1995 .

[14]  M. Zanetti,et al.  Oxidation behaviour in prosthetic UHMWPE components sterilised with high-energy radiation in the presence of oxygen , 2006 .

[15]  B. Pukánszky,et al.  Effect of catalyst residues on the chain structure and properties of a Phillips type polyethylen , 2000 .

[16]  G. N. Patel.  Crystallinity and the effect of ionizing radiation in polyethylene. V. Distribution of trans‐vinylene and trans,trans conjugated double bonds in linear polyethylene , 1975 .

[17]  D. Taylor,et al.  Radiation protection-A guide for scientists and physicians: J. Shapiro. Harvard University Press: Oxford University Press (1973) 339 pp. £7.50 (paperback £3.50) , 1973 .

[18]  A. S. Mollah,et al.  Calculation of gamma-ray attenuation parameters for locally developed shielding material: Polyboron , 2016 .

[19]  R. Setnescu,et al.  The effect of metals on thermal degradation of polyethylenes , 2004 .

[20]  S. Nespurek,et al.  Discoloration of polymers by phenolic antioxidants , 2002 .

[21]  P. Klemchuk,et al.  Transformation products of hindered phenolic antioxidants and colour development in polyolefins , 1991 .

[22]  W H Harris,et al.  Gamma sterilization of UHMWPE articular implants: an analysis of the oxidation problem. Ultra High Molecular Weight Poly Ethylene. , 1996, Biomaterials.

[23]  Joshua J. Jacobs,et al.  The UHMWPE Handbook. Ultra-High Molecular Weight Polyethylene in Total Joint Replacement , 2005 .

[24]  J. Pauquet,et al.  Degradation of polyolefins during melt processing , 1991 .

[25]  S. Wasserman,et al.  Oxidation behavior and stabilization of metallocene and other polyolefins , 1997 .

[26]  K. Gillen,et al.  Color formation in irradiated polymers , 1996 .

[27]  J. Luongo.  Infrared study of oxygenated groups formed in polyethylene during oxidation , 1960 .

[28]  T. Corrales,et al.  Effects of polymerization catalyst technology on the melt processing stability of polyethylenes. part 2. single stabilizer performance , 2012 .

[29]  B. Pukánszky,et al.  Processing stability of high density polyethylene: effect of adsorbed and dissolved oxygen , 2000 .

[30]  M. Jaunich,et al.  (U)HMWPE as Neutron Radiation Shielding Materials: Impact of Gamma Radiation on Structure and Properties , 2013 .

[31]  M. Dole,et al.  ULTRAVIOLET SPECTROSCOPY OF IRRADIATED POLYETHYLENE , 1966 .

[32]  W. Marsden.  I and J , 2012 .

[33]  L. Costa,et al.  Post electron-beam irradiation oxidation of orthopaedic UHMWPE , 2008 .

[34]  M. Sinclair,et al.  Color center annealing in γ - irradiated polystyrene, under vacuum and air atmospheres , 1993 .

[35]  W. Buchberger,et al.  Accelerated aging of polyethylene materials at high oxygen pressure characterized by photoluminescence spectroscopy and established aging characterization methods , 2014 .

[36]  M. Jaunich,et al.  Effect of high-dose gamma irradiation on (U)HMWPE neutron shielding materials , 2018 .

[37]  Jiří Kresta,et al.  Effect of titanium compounds on thermooxidative properties of stabilized polypropylene , 1969 .

[38]  H. Wiebeck,et al.  Effects of gamma radiation on commercial food packaging films—study of changes in UV/VIS spectra , 2004 .

[39]  V. Brunella,et al.  Post-irradiation oxidation of different polyethylenes , 2011 .