Microstructure and Mechanical Properties of 1050 Aluminum after the Combined Processes of Constrained Groove Pressing and Cold Rolling
暂无分享,去创建一个
[1] E. Popova,et al. Evolution of the Structure of Cu–1% Sn Bronze under High Pressure Torsion and Subsequent Annealing , 2018, Physics of Metals and Metallography.
[2] E. Bruder. Mechanical Properties of ARMCO® Iron after Large and Severe Plastic Deformation—Application Potential for Precursors to Ultrafine Grained Microstructures , 2018 .
[3] O. Sitdikov,et al. Effect of the Size of Al3(Sc,Zr) Precipitates on the Structure of Multi-Directionally Isothermally Forged Al-Mg-Sc-Zr Alloy , 2017, Physics of Metals and Metallography.
[4] K. Hajizadeh,et al. Microstructure, hardness homogeneity, and tensile properties of 1050 aluminum processed by constrained groove pressing , 2017 .
[5] Swadesh Kumar Singh,et al. Constrained groove pressing for sheet metal processing , 2016 .
[6] K. Wojciechowski,et al. Effect of severe plastic deformation realized by hydrostatic extrusion and rotary swaging on the properties of CP Ti grade 2 , 2015 .
[7] S. Kumar,et al. Structural and mechanical behaviour of severe plastically deformed high purity aluminium sheets processed by constrained groove pressing technique , 2014 .
[8] K. Hajizadeh,et al. Effect of two-step severe plastic deformation on the microstructure and mechanical properties of commercial purity titanium , 2014, Metals and Materials International.
[9] S. Kumar,et al. Mechanical behaviour and microstructural evolution of constrained groove pressed nickel sheets , 2013 .
[10] R. Valiev,et al. Effect of cold rolling on microstructure and mechanical properties of copper subjected to ECAP with various numbers of passes , 2012 .
[11] M. Reihanian,et al. On the mechanical properties and microstructure of commercially pure Al fabricated by semi-constrained groove pressing , 2011 .
[12] E. Pereloma,et al. Effect of Cold Rolling on as–ECAP Interstitial Free Steel , 2011 .
[13] S. Dobatkin,et al. Structure and mechanical properties of titanium subjected to high-rate channel angular pressing and deformation by rolling , 2011 .
[14] Kaiping Peng,et al. Equivalent strain, microstructure and hardness of H62 brass deformed by constrained groove pressing , 2011 .
[15] I. Alexandrov,et al. Microstructure, mechanical properties and electrical conductivity of industrial Cu-0.5%Cr alloy processed by severe plastic deformation , 2011 .
[16] M. Soliman,et al. EBSD investigation of the microstructure and microtexture evolution of 1050 aluminum cross deformed from ECAP to plane strain compression , 2011 .
[17] Reinhard Pippan,et al. Saturation of Fragmentation During Severe Plastic Deformation , 2010 .
[18] A. Kokabi,et al. Constrained groove pressing of low carbon steel: Nano-structure and mechanical properties , 2010 .
[19] E. Hosseini,et al. NANOSTRUCTURE AND MECHANICAL PROPERTIES OF 0–7 STRAINED ALUMINUM BY CGP: XRD, TEM AND TENSILE TEST , 2009 .
[20] Yan Beygelzimer,et al. Useful properties of twist extrusion , 2009 .
[21] Jong-jin Park,et al. Development of severe plastic deformation by various asymmetric rolling processes , 2009 .
[22] G. Gray,et al. The effect of grain size, strain rate, and temperature on the mechanical behavior of commercial purity aluminum , 2006 .
[23] R. Valiev,et al. Principles of equal-channel angular pressing as a processing tool for grain refinement , 2006 .
[24] P. Kao,et al. Transition of tensile deformation behaviors in ultrafine-grained aluminum , 2005 .
[25] E. Evangelista,et al. EBSD FEG-SEM, TEM and XRD techniques applied to grain study of a commercially pure 1200 aluminum subjected to equal-channel angular-pressing. , 2005, Micron.
[26] X. Liao,et al. Development of repetitive corrugation and straightening , 2004 .
[27] V. Stolyarov,et al. Grain refinement and properties of pure Ti processed by warm ECAP and cold rolling , 2003 .
[28] J. J. Park,et al. Numerical and experimental investigations of constrained groove pressing and rolling for grain refinement , 2002 .
[29] Jong-jin Park,et al. Constrained groove pressing and its application to grain refinement of aluminum , 2002 .
[30] R. Valiev,et al. Bulk nanostructured materials from severe plastic deformation , 2000 .
[31] Tetsuo Sakai,et al. Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process , 1999 .
[32] V. Navrátil. YIELD POINT PHENOMENA IN METALS AND ALLOYS , 2016 .
[33] Ronald W. Armstrong,et al. 60 Years of Hall-Petch: Past to Present Nano-Scale Connections , 2014 .
[34] A. K. Tieu,et al. Advanced rolling technologies for producing ultrafine- grain/nanostructured alloys , 2014 .
[35] B. J. Brindley,et al. Yield-point phenomena in substitutional alloys , 1970 .
[36] E. O. Hall. Aluminium and Its Alloys , 1970 .