Combinatorial Synchrotron Diffraction-Constitutive Modelling-Crystal Plasticity Simulation Framework for Direct Metal Laser Sintered AlSi10Mg Alloy

[1]  H. Andrä,et al.  Crystal plasticity simulation of the macroscale and microscale stress–strain relations of additively manufactured AlSi10Mg alloy , 2021, Computational Materials Science.

[2]  Xiebin Wang,et al.  A high strength AlSi10Mg alloy fabricated by laser powder bed fusion with addition of Al Ti C B master alloy powders , 2021 .

[3]  C. Emmelmann,et al.  Evolution of microscopic strains, stresses, and dislocation density during in-situ tensile loading of additively manufactured AlSi10Mg alloy , 2021 .

[4]  T. Voisin,et al.  New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion , 2021 .

[5]  J. Slotwinski,et al.  Evolution of the microstructure and mechanical properties of additively manufactured AlSi10Mg during room temperature holds and low temperature aging , 2020 .

[6]  E. Maire,et al.  Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg , 2020 .

[7]  M. Mohammadi,et al.  Post heat treatment of additive manufactured AlSi10Mg: On silicon morphology, texture and small-scale properties , 2020 .

[8]  Zan Li,et al.  The origin of high-density dislocations in additively manufactured metals , 2020 .

[9]  Zan Li,et al.  Stress relaxation and the cellular structure-dependence of plastic deformation in additively manufactured AlSi10Mg alloys , 2020 .

[10]  N. P. Gurao,et al.  A critical evaluation of microstructure-texture-mechanical behavior heterogeneity in high pressure torsion processed CoCuFeMnNi high entropy alloy , 2020, Materials Science and Engineering: A.

[11]  N. Takata,et al.  Development of gradient microstructure in the lattice structure of AlSi10Mg alloy fabricated by selective laser melting , 2020 .

[12]  C. Sutcliffe,et al.  Microstructure and mechanical properties of Cu-modified AlSi10Mg fabricated by Laser-Powder Bed Fusion , 2020 .

[13]  Jacqueline Lecomte-Beckers,et al.  Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting , 2019, Acta Materialia.

[14]  Kaushik Chatterjee,et al.  Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel , 2019, Additive Manufacturing.

[15]  M. Yadava,et al.  A New Phenomenological Approach for Modeling Strain Hardening Behavior of Face Centered Cubic Materials , 2019, Acta Materialia.

[16]  J. Kruth,et al.  On the study of tailorable interface structure in a diamond/Al12Si composite processed by selective laser melting , 2019, Materialia.

[17]  M. Mohammadi,et al.  Contribution of Mg2Si precipitates to the strength of direct metal laser sintered AlSi10Mg , 2019, Materials Science and Engineering: A.

[18]  M. Mohammadi,et al.  Strengthening mechanisms in direct metal laser sintered AlSi10Mg: Comparison between virgin and recycled powders , 2018, Additive Manufacturing.

[19]  B. McWilliams,et al.  Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment , 2018, Materials Characterization.

[20]  P. Rometsch,et al.  Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting , 2018, Materials & Design.

[21]  G. Sha,et al.  Enhanced dispersoid precipitation and dispersion strengthening in an Al alloy by microalloying with Cd , 2018, Acta Materialia.

[22]  S. Nikolov,et al.  DAMASK – The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale , 2018, Computational Materials Science.

[23]  M. Elbestawi,et al.  Thermal post-processing of AlSi10Mg parts produced by Selective Laser Melting using recycled powder , 2018 .

[24]  M. Fousová,et al.  Changes in the microstructure and mechanical properties of additively manufactured AlSi10Mg alloy after exposure to elevated temperatures , 2018 .

[25]  J. Shen,et al.  Strength and strain hardening of a selective laser melted AlSi10Mg alloy , 2017 .

[26]  N. Takata,et al.  Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments , 2017 .

[27]  W. Woo,et al.  Evaluation of the stress-strain relationship of constituent phases in AlSi10Mg alloy produced by selective laser melting using crystal plasticity FEM , 2017 .

[28]  M. Yadava,et al.  A modified Taylor model for predicting yield strength anisotropy in age hardenable aluminium alloys , 2017 .

[29]  C. Emmelmann,et al.  Additive Manufacturing of Metals , 2016 .

[30]  Moataz M. Attallah,et al.  Microstructure and strength of selectively laser melted AlSi10Mg , 2016 .

[31]  Yan Zhou,et al.  Effect of heat treatment on CuCrZr alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism , 2016, Journal of Materials Research and Technology.

[32]  Zhaohui Huang,et al.  A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility , 2015 .

[33]  M. Groeber,et al.  DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D , 2014, Integrating Materials and Manufacturing Innovation.

[34]  J. Kruth,et al.  Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder , 2013 .

[35]  H. Yang,et al.  Internal-state-variable based self-consistent constitutive modeling for hot working of two-phase titanium alloys coupling microstructure evolution , 2011 .

[36]  M. Sauzay,et al.  Scaling laws for dislocation microstructures in monotonic and cyclic deformation of fcc metals , 2011 .

[37]  M. Tiryakioğlu,et al.  The Effect of Artificial Aging on Tensile Work Hardening Characteristics of a Cast Al-7 Pct Si-0.55 Pct Mg (A357) Alloy , 2008 .

[38]  Thierry Hoc,et al.  Toward a physical model for strain hardening in fcc crystals , 2008 .

[39]  D. Field,et al.  Analysis of local orientation gradients in deformed single crystals. , 2005, Ultramicroscopy.

[40]  N. Hansen,et al.  Hall–Petch relation and boundary strengthening , 2004 .

[41]  P. Withers.  Depth capabilities of neutron and synchrotron diffraction strain measurement instruments. II. Practical implications , 2004 .

[42]  J. Embury,et al.  Precipitation strengthening of the aluminum alloy AA6111 , 2003 .

[43]  John L. Campbell,et al.  The influence of structural integrity on the tensile deformation of cast Al-7wt.%Si-0.6wt.%Mg alloys , 2003 .

[44]  A. Borbély,et al.  Variance method for the evaluation of particle size and dislocation density from x-ray Bragg peaks , 2001 .

[45]  R. Lebensohn.  N-site modeling of a 3D viscoplastic polycrystal using Fast Fourier Transform , 2001 .

[46]  Øystein Grong,et al.  Modelling of the age hardening behaviour of Al–Mg–Si alloys , 2001 .

[47]  A. Deschamps,et al.  Influence of predeformation and agEing of an Al–Zn–Mg alloy—II. Modeling of precipitation kinetics and yield stress , 1998 .

[48]  F. Sánchez-Bajo,et al.  The use of the pseudo-Voigt function in the variance method of X-ray line-broadening analysis. Erratum , 1997 .

[49]  Tamás Ungár,et al.  Long-range internal stresses and asymmetric X-ray line-broadening in tensile-deformed [001]-orientated copper single crystals , 1986 .

[50]  H. Mughrabi,et al.  Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals , 1983 .

[51]  U. F. Kocks,et al.  Kinetics of flow and strain-hardening☆ , 1981 .

[52]  P. Franciosi,et al.  Latent hardening in copper and aluminium single crystals , 1980 .

[53]  A. Wilson.  On Variance as a Measure of Line Broadening in Diffractometry General Theory and Small Particle Size , 1962 .

[54]  Ting Zhu,et al.  Additively manufactured hierarchical stainless steels with high strength and ductility. , 2018, Nature materials.

[55]  P. Paufler.  W. F. Hosford. The mechanics of crystals and textured polycrystals. Oxford University Press, New York–Oxford 1993. 248 Seiten, Preis £ 30,–. ISBN 0‐19‐507744‐X , 1994 .

[56]  D. Lloyd.  Aspects of fracture in particulate reinforced metal matrix composites , 1991 .

[57]  G. K. Williamson,et al.  III. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum , 1956 .