8.7% Power conversion efficiency polymer solar cell realized with non-chlorinated solvents

The use of environmental friendly solvents for the fabrication of solution processed organic photovoltaics is a key issue to scale up the technology. Nowadays however, toxic and harmful chlorinated solvents are largely used in polymer solar cell laboratory research. In this work we successfully reached high solubility and miscibility of the low band gap polymer Poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]] (PBDTTT-E-F, commonly known as PTB7), blended with [6,6]-Phenyl-C71-butyric acid methyl-ester ([70]PCBM fullerene derivative) in a non-chlorinated solvent (Dimethylbenzenes also known as Xylenes). We studied the solar cells realized depositing blend solutions based on various Xylenes (ortho, para and an isomeric mixture from technical grade) achieving high power conversion efficiencies up to 8.7%.

[1]  F. Krebs.  Fabrication and processing of polymer solar cells: A review of printing and coating techniques , 2009 .

[2]  Gang Li,et al.  10.2% Power Conversion Efficiency Polymer Tandem Solar Cells Consisting of Two Identical Sub‐Cells , 2013, Advanced materials.

[3]  Frederik C. Krebs,et al.  Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing , 2009 .

[4]  Yang Yang,et al.  Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer , 2012, Nature Photonics.

[5]  Lionel Hirsch,et al.  P3HT:PCBM, Best Seller in Polymer Photovoltaic Research , 2011, Advanced materials.

[6]  Alex K.-Y. Jen,et al.  Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer , 2008 .

[7]  Ronn Andriessen,et al.  Technology development for roll-to-roll production of organic photovoltaics , 2011 .

[8]  A. Moulé.  Power from plastic , 2010 .

[9]  Talha M. Khan,et al.  A Universal Method to Produce Low–Work Function Electrodes for Organic Electronics , 2012, Science.

[10]  S. Ochiai,et al.  Characterization of the Organic Thin Film Solar Cells with Active Layers of PTB7/PC71BM Prepared by Using Solvent Mixtures with Different Additives , 2014 .

[11]  R. Po’,et al.  From lab to fab: how must the polymer solar cell materials design change? – an industrial perspective , 2014 .

[12]  Frederik C. Krebs,et al.  Upscaling from single cells to modules – fabrication of vacuum- and ITO-free polymer solar cells on flexible substrates with long lifetime , 2014 .

[13]  Yang Yang,et al.  A polymer tandem solar cell with 10.6% power conversion efficiency , 2013, Nature Communications.

[14]  Gang Li,et al.  For the Bright Future—Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4% , 2010, Advanced materials.

[15]  Hui Jin,et al.  Efficient, Large Area ITO‐and‐PEDOT‐free Organic Solar Cell Sub‐modules , 2012, Advanced materials.

[16]  Bernard Kippelen,et al.  High performance polymeric charge recombination layer for organic tandem solar cells , 2012 .

[17]  Harald Hoppe,et al.  Chlorine-free processed high performance organic solar cells , 2014 .

[18]  Frederik C. Krebs,et al.  A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions , 2011 .

[19]  Daniel J. Burke,et al.  Green chemistry for organic solar cells , 2013 .

[20]  H. Lyu,et al.  8.9% Single‐Stack Inverted Polymer Solar Cells with Electron‐Rich Polymer Nanolayer‐Modified Inorganic Electron‐Collecting Buffer Layers , 2014 .

[21]  Bernard Kippelen,et al.  Direct correlation between work function of indium-tin-oxide electrodes and solar cell performance influenced by ultraviolet irradiation and air exposure. , 2012, Physical chemistry chemical physics : PCCP.

[22]  Gang Li,et al.  25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research , 2013, Advanced materials.

[23]  Miao Xu,et al.  Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure , 2012, Nature Photonics.