论文信息 - Characteristics of energy harvesting using BaTiO3/Cu laminates with changes in temperature

Characteristics of energy harvesting using BaTiO3/Cu laminates with changes in temperature

The energy harvesting characteristics of piezoelectric/copper (BaTiO3/Cu) laminates rising from sharp temperature changes were investigated both numerically and experimentally. First, a phase field simulation was performed to determine the temperature-dependent piezoelectric coefficient and permittivity values. Then, the output voltages of the BaTiO3/Cu laminates were calculated for variations from room temperature to either a cryogenic temperature (77 K) or a higher temperature (333 K) using a 3D finite element simulation with the properties calculated from the phase field simulation. Finally, the output voltages of the piezoelectric BaTiO3/Cu laminates were measured for the same temperature changes and were compared to the simulation results.

[1] Alper Erturk,et al. Underwater thrust and power generation using flexible piezoelectric composites: an experimental investigation toward self-powered swimmer-sensor platforms , 2011 .

[2] Fumio Narita,et al. A Review on Piezoelectric, Magnetostrictive, and Magnetoelectric Materials and Device Technologies for Energy Harvesting Applications , 2018 .

[3] Y. Shindo,et al. Piezoelectric Detection and Response Characteristics of Barium Titanate Unimorph Cantilevers Under AC Electric Fields , 2015 .

[4] Y. Shindo,et al. Phase field simulation on the electromechanical response of poled barium titanate polycrystals with oxygen vacancies , 2015 .

[5] Yirong Lin,et al. Feasibility study of thermal energy harvesting using lead free pyroelectrics , 2016 .

[6] Daniel J. Inman,et al. A survey of control strategies for simultaneous vibration suppression and energy harvesting via piezoceramics , 2012 .

[7] Y. Shindo,et al. Evaluation of dielectric and piezoelectric behavior of unpoled and poled barium titanate polycrystals with oxygen vacancies using phase field method , 2016 .