Evaluation of Breakup Models and Application to the Mixture Preparation Process for Diesel HCCI Engines

[1]  Wu Zhang,et al.  Effects of Micro-Hole and Ultra-High Injection Pressure on Mixture Properties of D.I. Diesel Spray , 2007 .

[2]  Markus Braun,et al.  Adjustment and Verification of Model Parameters for Diesel Injection CFD Simulation , 2006 .

[3]  Richard R. Steeper,et al.  Improving the NOX-CO2 Trade-Off of an HCCI Engine Using a Multi-Hole Injector , 2007 .

[4]  Ingemar Denbratt,et al.  HCCI Operation of a Passenger Car DI Diesel Engine with an Adjustable Valve Train , 2006 .

[5]  R. A. White,et al.  Smokeless Combustion within a Small-Bore HSDI Diesel Engine Using a Narrow Angle Injector , 2007 .

[6]  R. M. Siewert,et al.  Spray Angle and Rail Pressure Study for Low NOx Diesel Combustion , 2007 .

[7]  R. Reitz,et al.  Modeling the Effects of Fuel Spray Characteristics on Diesel Engine Combustion and Emission , 1998 .

[8]  Kazutoshi Mori,et al.  Premixed Compression Ignition (PCI) Combustion for Simultaneous Reduction of NOx and Soot in Diesel Engine , 2004 .

[9]  Dennis N. Assanis,et al.  Evaluation of a Narrow Spray Cone Angle, Advanced Injection Timing Strategy to Achieve Partially Premixed Compression Ignition Combustion in a Diesel Engine , 2005 .

[10]  Tsukasa Hori,et al.  Large Eddy Simulation of Non-Evaporative and Evaporative Diesel Spray in Constant Volume Vessel by Use of KIVALES , 2006 .

[11]  Peter J. O'Rourke,et al.  A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model , 2000 .

[12]  Franz X. Tanner,et al.  Simulation of Liquid Jet Atomization for Fuel Sprays by Means of a Cascade Drop Breakup Model , 1998 .

[13]  F. Tanner.  Liquid Jet Atomization and Droplet Breakup Modeling of Non-Evaporating Diesel Fuel Sprays , 1997 .

[14]  A. A. Amsden,et al.  A DISCRETE MULTICOMPONENT FUEL MODEL , 2003 .

[15]  U. Renz,et al.  Experimental Investigation of the Turbulent Flow Field of Vaporizing Diesel-Sprays , 2002 .

[16]  R. Reitz,et al.  Optimizing HSDI Diesel Combustion and Emissions Using Multiple Injection Strategies , 2005 .

[17]  John E. Dec,et al.  Comparisons of diesel spray liquid penetration and vapor fuel distributions with in-cylinder optical measurements , 2000 .

[18]  Franz X. Tanner,et al.  A Cascade Atomization and Drop Breakup Model for the Simulation of High-Pressure Liquid Jets , 2003 .

[19]  Peter J. O'Rourke,et al.  The TAB method for numerical calculation of spray droplet breakup , 1987 .

[20]  Vincent Knop,et al.  Potential of Narrow Angle Direct Injection Diesel Engines for Clean Combustion: 3D CFD Analysis , 2006 .

[21]  Akihiko Minato,et al.  Investigation of premixed lean diesel combustion with ultra high pressure injection , 2005 .

[22]  Rolf D. Reitz,et al.  A computational investigation into the effects of spray targeting, bowl geometry and swirl ratio f , 2007 .

[23]  Rolf D. Reitz,et al.  Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine , 2007 .

[24]  P. Nordin.  Complex Chemistry Modeling of Diesel Spray Combustion , 2001 .

[25]  Rolf D. Reitz,et al.  Spray Targeting to Minimize Soot and CO Formation in Premixed Charge Compression Ignition (PCCI) Combustion with a HSDI Diesel Engine , 2006 .

[26]  C. Lee,et al.  Modeling of spray vaporization and air-fuel mixing in gasoline direct-injection engines , 2000 .

[27]  R. Reitz.  Modeling atomization processes in high-pressure vaporizing sprays , 1987 .

[28]  Franz X. Tanner,et al.  DEVELOPMENT AND VALIDATION OF A CASCADE ATOMIZATION AND DROP BREAKUP MODEL FOR HIGH-VELOCITY DENSE SPRAYS , 2004 .

[29]  H. Hiroyasu,et al.  Fuel Droplet Size Distribution in Diesel Combustion Chamber , 1974 .

[30]  K. Kitano,et al.  Research of the DI Diesel Spray Characteristics at High Temperature and High Pressure Ambient , 2007 .

[31]  Rolf D. Reitz,et al.  Application of Micro-Genetic Algorithms for the Optimization of Injection Strategies in a Heavy-Duty Diesel Engine , 2005 .

[32]  Ming Jia,et al.  A Micro-Variable Circular Orifice Fuel Injector for HCCI-Conventional Engine Combustion - Part I Numerical Simulation of Cavitation , 2007 .