An integrated theoretical fouling model for convective heating surfaces in coal-fired boilers

Particulate fouling on convective heating surfaces in coal-fired power plant boilers could lead to significant efficiency deterioration and frequent unit outages. In this paper, a new integrated particulate fouling model is presented by considering the combined suspended particles deposition and the fouling removal processes. A pre-deposited medium, rather than the tube wall, is taken as the target surface, while considering its internal microstructure, surface morphology and mechanical properties. To understand the processes of particle deposition and removal in inertial impaction, three fouling criteria are proposed in this paper by defining critical sticking angle and critical velocities. Some influential parameters, such as the interfacial adhesion energy and the fouling porosity, were studied, which revealed good prediction precision of the fouling model. Based on the fouling model presented in this paper, a computation fluid dynamics simulation was implemented to reconstruct the distribution of particulate fouling and the characteristic of fouling growth on economizer tubes.

[1]  Ching S. Chang,et al.  Elastic constants for granular materials modeled as first-order strain-gradient continua , 2003 .

[2]  B. L. Yeap,et al.  Evaluation of laboratory crude oil threshold fouling data for application to refinery pre-heat trains , 2002 .

[3]  Xi-Qiao Feng,et al.  Numerical simulations of the normal impact of adhesive microparticles with a rigid substrate , 2009 .

[4]  Green’s function measurements of force transmission in 2D granular materials , 2002, cond-mat/0211031.

[5]  Shuiqing Li,et al.  Discrete element simulation of micro-particle deposition on a cylindrical fiber in an array , 2007 .

[6]  D. E. Rosner,et al.  Inertial effects on thermophoretic transport of small particles to walls with streamwise curvature—II. Experiment☆ , 1995 .

[7]  R. Smith,et al.  Optimization of Operating Conditions for Mitigating Fouling in Heat Exchanger Networks , 2007 .

[8]  van Aa Anton Steenhoven,et al.  Modelling the impaction of a micron particle with a powdery layer , 2006 .

[9]  M. Pourkashanian,et al.  Prediction of ash deposition on superheater tubes from pulverized coal combustion , 1996 .

[10]  Jeffrey S. Marshall,et al.  Particle aggregation and capture by walls in a particulate aerosol channel flow , 2007 .

[11]  van Aa Anton Steenhoven,et al.  Rebound characteristics for 50-μm particles impacting a powdery deposit , 2006 .

[12]  A. Dehbi.  A stochastic Langevin model of turbulent particle dispersion in the presence of thermophoresis , 2009 .

[13]  J. Y. Tu,et al.  Numerical modelling and validation of gas-particle flow in an in-line tube bank , 2007, Comput. Chem. Eng..

[14]  C. Fletcher,et al.  Computational study of fouling deposit due to surface-coated particles in coal-fired power utility boilers , 2002 .

[15]  N. Huber,et al.  Experimental analysis and modelling of particle-wall collisions , 1999 .

[16]  Francisco J. Romay,et al.  Thermophoretic deposition of aerosol particles in turbulent pipe flow , 1998 .

[17]  H. Kalman,et al.  Incipient motion of individual particles in horizontal particle–fluid systems: A. Experimental analysis , 2009 .

[18]  C. Thornton,et al.  A theoretical model for the stick/bounce behaviour of adhesive, elastic-plastic spheres , 1998 .

[19]  Athanasios G. Konstandopoulos,et al.  Particle sticking/rebound criteria at oblique impact , 2006 .

[20]  Ta-Peng Chang,et al.  Orthotropic elastic response of granular materials , 1997 .

[21]  Orven F. Swenson,et al.  Aerosol focusing in micro-capillaries: Theory and experiment , 2008 .

[22]  Ching S. Chang,et al.  Estimates of elastic moduli for granular material with anisotropic random packing structure , 1995 .

[23]  G. Ch Bergeles,et al.  Effects of fouling on the efficiency of heat exchangers in lignite utility boilers , 1997 .

[24]  M. Bohnet,et al.  Calculation of particle–wall adhesion in horizontal gas–solids flow using CFD , 2005 .

[25]  Pål Skalle,et al.  A mechanistic model to determine the critical flow velocity required to initiate the movement of spherical bed particles in inclined channels , 2003 .

[26]  Contact time of an incident particle hitting a 2D bed of particles , 2009 .

[27]  Pierre-Yves Hicher,et al.  An elasto-plastic model for granular materials with microstructural consideration , 2005 .

[28]  Colin Thornton,et al.  Impact of elastic spheres with and without adhesion , 1991 .

[29]  Jyh-Shyan Lin,et al.  Thermophoretic Deposition of Particles in Laminar and Turbulent Tube Flows , 2004 .