Energy-efficient separation process and control scheme for extractive distillation of ethanol-water using deep eutectic solvent

Abstract With the development and improvement of solvents (or entrainers), the extractive distillation process has been significantly enhanced, and the energy consumption of the separation process has been effectively reduced. In this work, the energy-efficient separation process for extractive distillation with deep eutectic solvent ChCl/Urea (1:2) is designed. The ethanol dehydration process is selected as a case study to evaluate the practical utility of this novel solvent in large-scale production. The multi-objective genetic algorithm is used to optimize the extractive distillation process, and the waste heat is recovered through the heat intensification strategy to achieve the optimal design. Five control schemes, which include proportional-integral (PI) and model predictive control strategies (MPC), are developed for the proposed separation process. According to the nonlinear relationship between manipulated variables and controlled variables, the improved control structures are designed to enhance the dynamic performance. Integral absolute error (IAE) and destroyed exergy are applied as evaluation criteria to test the controllability and energy efficiency of the system. The results show that both CS4 and MPC control schemes have good controllability, and the MPC control scheme displays better energy efficiency than the CS4 control scheme.

[1]  Biaohua Chen,et al.  Extractive Distillation with a Mixture of Organic Solvent and Ionic Liquid as Entrainer , 2014 .

[2]  Na Yu,et al.  Composition control and temperature inferential control of dividing wall column based on model predictive control and PI strategies , 2017 .

[3]  Kai Sundmacher,et al.  Systematic Method for Screening Ionic Liquids as Extraction Solvents Exemplified by an Extractive Desulfurization Process , 2017 .

[4]  P. Kumar,et al.  Thermal and physical properties of (Choline chloride + urea + l-arginine) deep eutectic solvents , 2016 .

[5]  Francisco Pena-Pereira,et al.  Ionic liquids and deep eutectic mixtures: sustainable solvents for extraction processes. , 2014, ChemSusChem.

[6]  Yixin Ma,et al.  A review of extractive distillation from an azeotropic phenomenon for dynamic control , 2019, Chinese Journal of Chemical Engineering.

[7]  Anton A. Kiss,et al.  Energy efficient control of a BTX dividing-wall column , 2011, Comput. Chem. Eng..

[8]  William L. Luyben,et al.  Control of Heat-Integrated Extractive Distillation Processes , 2017, Comput. Chem. Eng..

[9]  Mengxiao Yu,et al.  Control of an energy-saving side-stream extractive distillation process with different disturbance conditions , 2019, Separation and Purification Technology.

[10]  Lichun Dong,et al.  Proportional-Integral Control and Model Predictive Control of Extractive Dividing-Wall Column Based on Temperature Differences , 2018, Industrial & Engineering Chemistry Research.

[11]  Vincent Gerbaud,et al.  Improved Design and Efficiency of the Extractive Distillation Process for Acetone–Methanol with Water , 2015 .

[12]  R. Prasad,et al.  Anhydrous ethanol: A renewable source of energy , 2010 .

[13]  Zhaoyou Zhu,et al.  Extractive distillation for ethanol dehydration using imidazolium-based ionic liquids as solvents , 2016 .

[14]  William L. Luyben,et al.  Effect of Solvent on Controllability in Extractive Distillation , 2008 .

[15]  Zhigang Lei,et al.  Extractive distillation of methylal/methanol mixture using the mixture of dimethylformamide (DMF) and ionic liquid as entrainers , 2018 .

[16]  Zhigang Lei,et al.  Extractive Distillation: A Review , 2003 .

[17]  Zhigang Lei,et al.  Extractive distillation with ionic liquids: A review , 2014 .

[18]  I-Lung Chien,et al.  Energy-Saving Optimal Design and Effective Control of Heat Integration-Extractive Dividing Wall Column for Separating Heterogeneous Mixture Methanol/Toluene/Water with Multiazeotropes , 2018 .

[19]  Shoutao Ma,et al.  Design, optimization and control of extractive distillation for the separation of isopropanol-water using ionic liquids , 2019, Separation and Purification Technology.

[20]  W. Yu,et al.  Eco-efficiency and control loop configuration for recycle systems , 2012, 2012 American Control Conference (ACC).

[21]  Gade Pandu Rangaiah,et al.  Bioethanol recovery and purification using extractive dividing-wall column and pressure swing adsorption: An economic comparison after heat integration and optimization , 2015 .

[22]  Junyan Zhu,et al.  Separation of azeotropic mixtures (ethanol and water) enhanced by deep eutectic solvents , 2017 .

[23]  Mohd Ali Hashim,et al.  Separation of BTEX aromatics from n-octane using a (tetrabutylammonium bromide + sulfolane) deep eutectic solvent – experiments and COSMO-RS prediction , 2014 .

[24]  Mohd Ali Hashim,et al.  Using Deep Eutectic Solvents Based on Methyl Triphenyl Phosphunium Bromide for the Removal of Glycerol from Palm-Oil-Based Biodiesel , 2011 .

[25]  M. Hussain,et al.  Reducing the Energy Demand of Cellulosic Ethanol through Salt Extractive Distillation Enabled by Electrodialysis , 2013 .

[26]  Darci Odloak,et al.  TUNING OF MODEL PREDICTIVE CONTROL WITH MULTI-OBJECTIVE OPTIMIZATION , 2016 .

[27]  Geoffrey W. Stevens,et al.  Estimation of Normal Boiling Temperatures, Critical Properties, and Acentric Factors of Deep Eutectic Solvents , 2015 .

[28]  Ž. Olujić,et al.  Reducing CO2 emissions of internally heat-integrated distillation columns for separation of close boiling mixtures , 2006 .

[29]  Xin Li,et al.  Process evaluation on the separation of ethyl acetate and ethanol using extractive distillation with ionic liquid , 2017 .

[30]  Claudia Gutiérrez-Antonio,et al.  Pareto front of ideal Petlyuk sequences using a multiobjective genetic algorithm with constraints , 2009, Comput. Chem. Eng..

[31]  G. P. Rangaiah,et al.  Review of Technological Advances in Bioethanol Recovery and Dehydration , 2017 .

[32]  William L. Luyben,et al.  Improved design of an extractive distillation system with an intermediate-boiling solvent , 2015 .

[33]  Gade Pandu Rangaiah,et al.  Application and Analysis of Methods for Selecting an Optimal Solution from the Pareto-Optimal Front obtained by Multiobjective Optimization , 2017 .

[34]  M. Farid,et al.  Thermogravimetric measurement of deep eutectic solvents vapor pressure , 2016 .

[35]  E. L. Ligero,et al.  Dehydration of ethanol with salt extractive distillation—a comparative analysis between processes with salt recovery , 2003 .

[36]  Ismael Díaz,et al.  Ionic liquids as entrainers for the separation of aromatic-aliphatic hydrocarbon mixtures by extractive distillation , 2016 .

[37]  Jie Zhang,et al.  Distillation Control Structure Selection for Energy‐Efficient Operations , 2015 .

[38]  Aiwu Zeng,et al.  Design and control of extractive distillation process for separation of the minimum-boiling azeotrope ethyl-acetate and ethanol , 2018, Chemical Engineering Research and Design.

[39]  Wei Yu,et al.  Recycle effect on the relative exergy array , 2012 .

[40]  J. Gómez,et al.  Optimization of the Design and Operation of an Extractive Distillation System for the Production of Fuel Grade Ethanol Using Glycerol as Entrainer , 2011 .

[41]  Yong Wang,et al.  Control of extractive distillation process for separating heterogenerous ternary azeotropic mixture via adjusting the solvent content , 2018 .

[42]  X. Geng,et al.  Computer-Aided Screening of Ionic Liquids As Entrainers for Separating Methyl Acetate and Methanol via Extractive Distillation , 2018, Industrial & Engineering Chemistry Research.

[43]  I-Lung Chien,et al.  Design and control of an energy-efficient alternative process for the separation of methanol/toluene/water ternary azeotropic mixture , 2018, Separation and Purification Technology.

[44]  Vincent Gerbaud,et al.  Optimization of pre-concentration, entrainer recycle and pressure selection for the extractive distillation of acetonitrile-water with ethylene glycol , 2018 .

[45]  W. Luyben.  Distillation Design and Control Using Aspen Simulation , 2006 .

[46]  Biaohua Chen,et al.  Process intensification on the separation of benzene and thiophene by extractive distillation , 2015 .

[47]  Georg Fieg,et al.  Applying Model Predictive Control to Dividing Wall Columns , 2011 .

[48]  Lanyi Sun,et al.  Design and Control of Extractive Dividing Wall Column for Separating Benzene/Cyclohexane Mixtures , 2014 .

[49]  Iván D. Gil,et al.  Control of an extractive distillation process to dehydrate ethanol using glycerol as entrainer , 2012, Comput. Chem. Eng..

[50]  Chang Liu,et al.  Modeling, simulation and evaluation of biogas upgrading using aqueous choline chloride/urea , 2017, Applied Energy.

[51]  Warren D. Seider,et al.  Product and Process Design Principles: Synthesis, Analysis, and Evaluation , 1998 .

[52]  Xinqiang You,et al.  Review of extractive distillation. Process design, operation, optimization and control , 2019, Chemical Engineering Research and Design.

[53]  I. Chien,et al.  Critical Assessment of Using an Ionic Liquid as Entrainer via Extractive Distillation , 2017 .

[54]  Geert-Jan Witkamp,et al.  Ionic liquids and deep eutectic solvents in natural products research: mixtures of solids as extraction solvents. , 2013, Journal of natural products.